EXHIBIT A.pdf
PDF 239 KB Posted
- Attached to
- SOCKET HEAD CAP SCREWS Federal contract opportunity
- Solicitation number
- SPMYM3-20-Q-1029
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| EXHIBIT B.pdf | ||
| Combined Synopsis Solicitation SPMYM3-20-Q-1029 Hx Head Capscrews.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2Z-0335-20 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
SOCKET HEAD CAPSCREW
E. CONTRACT/PR NO.
SPMYM3-20-Q-1029
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
STEVE YOUNG Ext: 3207 245.2Z
H. DATE
11/13/19
I. APPROVED BY 245.2
5 / 2 3 / 2 0 2 0
X M A R C I E D O U G L A S
S i g n e d b y : D O U G L A S . M A R C I E . M A R I E . 1 2 3 5 2 6 1 3 1 2
J. DATE
23MAY2020
File details come from the government source that posted it. Updated .