Exhibit A-C.pdf
PDF 201 KB Posted
- Attached to
- SELF LOCKING HEX NUTS Federal contract opportunity
- Solicitation number
- SPMYM325Q6031
About this file
This is a Contract Data Requirements List (CDRL) that specifies the data delivery requirements for a Defense Logistics Agency contract (SPMYM325Q6031) for socket flat countersunk head self-locking cap screws and hex nuts. The CDRL details three exhibits (A, B, and C) that each require two data items: a Certificate of Compliance (DI-MISC-81356A) and a Chemical & Mechanical Certification Data Report (DI-MISC-80678).
Each data item must be submitted one time with the material delivery under separate shipment numbers. The certifications require actual test results for chemical and mechanical properties, with quantitative results in specified units. Fastener certifications must show evidence of testing the correct number of specimens, with new untested fasteners required for wedge tensile and yield strength testing. All items require distribution to Code 133.2 with one final copy. The documents were prepared by Conrad Gagne and Heather Sweeney and approved by Jason Laflamme, with submission dates in early 2025.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 0001.pdf | ||
| 25Q6031 RFQ Required.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses 241128.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-0527-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
A TDP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD 50094001 SPMYM325Q6031
SLF LKG CAP SCREW ANGLE
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/7/2025
CONRAD GAGNE Ext: 6797 01/09/2025 X 02/07/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776S56
CLIN 0002-3
CONTRACT DATA REQUIREMENTS LIST
245.2C-0527-25 (2 DATA ITEMS)
C. CATEGORY
TDP X TM OTHER
F. CONTRACTOR
B. EXHIBIT
B
E. CONTRACT/PR NO.
50094001 SPMYM325Q6031
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
B001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
B002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
2/7/2025
CONRAD GAGNE Ext: 6797 01/09/2025 X 02/07/2025
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776S56
A. CONTRACT LINE ITEM NO.
CLIN 0005-6
D. SYSTEM/ITEM
SOCKET FLAT COUNTERSUNK HEAD
SLF LKG CAP SCREW ANGLE
CONTRACT DATA REQUIREMENTS LIST (2 DATA ITEMS)
A. CONTRACT LINE-ITEM NO. B. EXHIBIT
C
C. CATEGORY
TDP TM ______ OTHER_X_____
D. SYSTEM/ITEM
Self-locking Hex Nut
E. CONTRACT/PR NO. F. CONTRACTOR
DATA ITEM NO.
C001
TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
CONTRACT REFERENCE
SECTION C.2
REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
CODE 133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232-7003 or
52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
15. TOTAL 0 1 0
1.DATA ITEM NO.
C002
2 TITLE of DATA ITEM
CERTIFICATION / DATA REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C.3
REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST STATEMENT
REQUIRED
A
10. FREQUENCY
ONE TIME
12. DATE OF 1st
SUBMISSION
WITH MATERIAL
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE 11. AS OF DATE 13. DATE OF
SUBSEQUENT
SUBMISSION
REG REPRO
133.0 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
15. TOTAL 0 1 0
G. PREPARED BY
Heather Sweeney /S/
H. DATE
10/24/2024
I. APPROVED BY 245.2
X
J. DATE
DD FORM 1423-1 (FACSIMILE) PAGE 2 OF 2
CLIN 0008-9
5038E400 SPMYM325Q6031
| Exhibit A |
| Exhibit B |
| Exhibit C |
File details come from the government source that posted it. Updated .