Engineering Data Requirements NSN-2554.pdf
PDF 58 KB Posted
- Attached to
- RECORDER, SIGNAL Federal contract opportunity
- Solicitation number
- SPRHA4-25-R-0284
- Issued by
- Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Attachment A) for the manufacture of a Recorder Assembly Flight Control System for the F-16 aircraft, with part number 16VC040-3 and National Stock Number 6625-01-331-2554WF. The document was prepared on December 3, 2021, by the 416 SCMS/GUEAA office at Hill AFB.
The document outlines critical requirements regarding lead-free components, requiring notification to the US Air Force when lead-free solder or lead-free plated components are used in military electronic products, as this is considered a flight safety and national security concern. Contractors must provide written certification of compliance if no lead-free components exist in the manufactured end-item, follow industry standard IPC-1066 for marking and labeling, and include program engineer evaluations for lead-free military parts' reliability, performance, and compatibility. The document also specifies that marking should follow MIL-STD-130 instead of FPS-3008, and any deviations from specifications in control drawings require prior approval from the cognizant engineering activity. The Engineering Support Activity (ESA) serves as the point of contact for these requirements.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA425R0284_0002 CUI SSI.pdf | ||
| SPRHA425R0284_0001 CUI SSI.pdf | ||
| Counterfeit Prevention Plan.pdf | ||
| Packaging Statement of Work 2023.pdf | ||
| Engineering Data List NSN-2554.pdf | ||
| Manufacturing Qualification Requirements NSN-2554.pdf | ||
| Engineering Data List NSN-4888.pdf | ||
| Manufacturing Qualification Requirements NSN-4888.pdf | ||
| Engineering Data Requirements NSN-4888.pdf | ||
| Unmarked Eng Data 2022.pdf | ||
| SPRHA425R0284 CUI SSI.pdf |
Show all 11
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RECORDER ASSEMBLY- FLIGHT CONTROL SYSTEM. F-16
2. PART NUMBER:
16VC040-3
3. NATIONAL STOCK NUMBER:
6625-01-331-2554WF
PREPARED BY:
JONATHAN TUCHOW
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
3 DECEMBER 2021
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.
8. THE USE OF LEAD-FREE SOLDER OR LEAD-FREE PLATED COMPONENTS IN MILITARY ELECTRONIC PRODUCTS IS
CONSIDERED A FLIGHT SAFETY AND NATIONAL SECURITY CONCERN. FOR THIS REASON THE US AIR FORCE WANTS TO
BE NOTIFIED WHEN LEAD-FREE COMPONENTS AND MANUFACTURING PROCESSES HAVE BEEN IMPLEMENTED. AS PART
OF SATISFACTORY COMPLIANCE WITH THE REQUIREMENTS OF THIS CONTRACT THE US AIR FORCE REQUIRES
NOTIFICATION ON A NO-COST BASIS WHEN ANY OF THE FOLLOWING CONDITIONS EXIST:
1. COMMERCIAL OFF-THE-SHELF (COTS) OR ANY OTHER ELECTRICAL COMPONENTS THAT CONTAIN LEAD-FREE
SOLDER OR LEAD-FREE PLATED COMPONENTS ARE USED IN THE END-ITEM.
2. ANY LEAD-FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED
WITH A SEPARATE PART NUMBER OR DESIGNATION.
9. IF NO LEAD-FREE, LEAD-FREE PLATED COTS OR ANY OTHER LEAD-FREE ELECTRICAL OR ELECTRONICS
COMPONENTS EXIST IN THE MANUFACTURED END-ITEM, THE CONTRACTOR SHALL PROVIDE WRITTEN CERTIFICATION
OF COMPLIANCE AS A DELIVERABLE WITH THE CONTRACT.
1. USE INDUSTRY STANDARD IPC-1066, "MARKING, SYMBOLS AND LABELS FOR IDENTIFICATION OF LEAD-FREE
AND OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES,"
2. INCLUDE THE PROGRAM ENGINEER'S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY "LEAD-FREE"
MILITARY PART(S) IN REFERENCE TO ITS' RELIABILITY, PERFORMANCE AND COMPATIBILITY FOR THE SYSTEM.
10. POC FOR THIS MATTER IS THE ENGINEERING SUPPORT ACTIVITY (ESA).
File details come from the government source that posted it. Updated .