Engineering Data Requirements.pdf
PDF 111 KB Posted
- Attached to
- Access Door Federal contract opportunity
- Solicitation number
- SPRHA425Q0990
- Issued by
- Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document for a specific aircraft door assembly. The document covers the manufacturing specifications for a Left Hand (LH) Engine Access Door, with Part Number 16B6514-681 and National Stock Number 1560-01-263-4414WF. Key technical requirements include unique identification (UID) labeling standards per MIL-STD-130, specifying minimum 1/8-inch human-readable and 1/4-inch machine-readable 2D matrix labels that must include CAGE code, Part Number, and Serial Number. The document emphasizes that source materials listed on standards and specifications are the only approved materials, and any substitutions or deviations from control drawings require prior approval from the cognizant engineering activity. The document was prepared by Donald Willmoth from the 416 SCMS/GUEAA office at Hill Air Force Base on September 29, 2020.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA425Q0990 CUI SSI.pdf | ||
| Special Packaging Instructions (SPI-F01-047-5928).pdf | ||
| Packaging Statement of Work.pdf | ||
| Unmarked Eng Data.pdf | ||
| Manufacturing Qualification Requirements.pdf | ||
| First Article Test Report (DD1423).pdf | ||
| Engineering Data List.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
DOOR ASSY, ENGINE ACCESS-FS 345.20 TO FS389.80, LH
2. PART NUMBER:
16B6514-681
3. NATIONAL STOCK NUMBER:
1560-01-263-4414WF
PREPARED BY:
DONALD WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
20200929
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA
INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE
THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL
BY THE COGNIZANT ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT
AUTHORIZED WITHOUT PRIOR APPROVAL BY THE COGNIZANT ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. Minimum 1/8th inch on Human readable to include:
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
B. Minimum 1/4 inch square on Machine Readable 2D Matrix – construct 2 – to include
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
C. Label shall contain all data on existing label, if existing label is to be replaced.
D. Same Label Material shall be used as specified in drawing for existing label.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418
File details come from the government source that posted it. Updated .