Engineering Data Requirements.pdf
PDF 10 KB Posted
- Attached to
- Power Supply Federal contract opportunity
- Solicitation number
- SPRHA4-25-R-0290
- Issued by
- Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements form (Hill AFB Form 462) providing manufacturing instructions for a Power Supply Data Entry Display for the F-16 aircraft, with part number 16VE173002-7 and National Stock Number 6130-21-914-2914WF.
The document specifies key manufacturing requirements including: marking must comply with MIL-STD-130, no deviations from specifications in control drawings are permitted without prior approval from the cognizant engineering activity, and material substitutions require prior approval. The form indicates military specifications and standards will not be furnished in the bid set. The document was prepared by the 416 SCMS/GUEAA office at Hill Air Force Base and is dated December 5, 2024.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA425R0290_0004 CUI SSI.pdf | ||
| SPRHA425R0290_0003 CUI SSI.pdf | ||
| SPRHA425R0290_0002 CUI SSI.pdf | ||
| SPRHA425R0290_0001 CUI SSI.pdf | ||
| Packaging Statement of Work.pdf | ||
| Engineering Data List.pdf | ||
| SPRHA425R0290 CUI SSI.pdf | ||
| Unmarked Eng Data 2022.pdf | ||
| Manufacturing Qualification Requirements.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ENGINEERING INSTRUCTIONS)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
POWER SUPPLY, DATA ENTRY DISPLAY F-16
2. PART NUMBER:
16VE173002-7
3. NATIONAL STOCK NUMBER:
6130-21-914-2914WF
PREPARED BY:
JONATHAN TUCHOW
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
5 DECEMBER 2024
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL-STD-130.
File details come from the government source that posted it. Updated .