Engineering Data Requirements.doc
DOC document 41 KB Posted
- Attached to
- F-16 Gyroscope Federal contract opportunity
- Solicitation number
- FA8212-22-Q-0008
About this file
This document provides engineering data requirements for the manufacture of an F-16 gyroscope. The requirements specify the part number as 446226 and national stock number as 6615-01-527-9183WF. Manufacturers must comply with specifications including MIL-STD-130 for marking, MIL-STD-2000 for aircraft soldering, and IUID requirements for a human-readable label with at minimum 1/8 inch lettering and a machine-readable 2D matrix with at minimum 1/4 inch square including cage code, part number, and serial number. Deviations require government approval. The related federal contract opportunity is a solicitation for the F-16 gyroscope with the same national stock number, to be awarded as a firm-fixed-price contract to the responsible quoter whose conforming proposal is most advantageous to the government. The requirement is restricted to one source, U.S. Dynamics Corporation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| FA821222Q0008.pdf | ||
| Transportation Data.pdf | ||
| Item Description.pdf | ||
| Packaging Requirements.pdf | ||
| IUID.pdf | ||
| Engineering Data List.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV:
ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
XXXXXXXXXXXXXXXX
2. PART NUMBER:
3. NATIONAL STOCK NUMBER:
1234-12-123-1234FG
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC, WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
| REV: |
| ENGINEERING DATA REQUIREMENTS |
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
GYROSCOPE (F-16)
2. PART NUMBER:
446226
3. NATIONAL STOCK NUMBER:
6615-01-527-9183WF
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. MARK PER MIL-STD-130.
6. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE COMPLIED WITH.
A. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
B. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
C. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
D. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
E. IUID MARKING MUST BE PERMANENT.
F. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
G. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
IF DEVIATIONS FROM THESE INSTRUCTIONS ARE REQUIRED OR DESIRED, PERMISSION FROM GOVERNMENT ENGINEER IS REQUIRED.
8. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL-STD-2000 THAT APPLIES TO AIRCRAFT SOLDERING FOR ALL SOLDERING REQUIREMENTS. *NOTE: J-STD-001 MAY BE USED IN LIEU OF MIL-STD-2000, IF SPECIFICATION MEETS OR EXCEEDS MIL-STD-2000.
9. EFFECTIVE 9 MAY 2005 THE DEPARTMENT OF THE AIR FORCE ISSUED AN AIR WORTHINESS ADVISORY
(M-05-01) REGARDING THE USE OF LEAD-FREE SOLDER IN ELECTRICAL AND ELECTRONIC MILITARY PRODUCTS. TO DATE, NO LEAD-FREE SOLDER FORMULATION HAS MATCHED THE RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD LEADED SOLDERS. THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE LEAD-FREE SOLDER REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE AIR FORCE WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATIBILITY, AND RELIABILITY STANDARDS PREVIOUSLY ESTABLISHED WITH LEADED SOLDERS. FAILURE TO DO SO, COULD ADVERSELY IMPACT THE PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING NATIONAL SECURITY.
PREPARED BY:
RICHARD TILTON
OFFICE SYMBOL:
GBMAF
DATE:
20080411
PREPARED BY:
JED FOY
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
DEC. 6, 2021
HILL AFB FORM 462 Page 2 of 2
File details come from the government source that posted it. Updated .