EDR.pdf
PDF 75 KB Posted
- Attached to
- F-16 Wing Flap Federal contract opportunity
- Solicitation number
- SPRHA4-21-R-0423
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of a wing flap assembly for an F-16 aircraft. It identifies the part and national stock numbers, applicable military specifications and standards to be used in lieu of the data indicated, and requires prior approval for any substitutions or deviations from specifications. It also specifies marking and material requirements and states that certain engineering drawings are not required or furnished for manufacturing, which will instead use specified IGES loft data drawings.
The related federal contract opportunity is a solicitation seeking offers to provide three each of the identified wing flap national stock number, with the potential for a first article requirement. The solicitation was issued by the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA421R0423_______0002.pdf | ||
| SPRHA421R0423_______0001.pdf | ||
| EDL.pdf | ||
| MQR.pdf | ||
| SPI.pdf | ||
| CDRL.pdf | ||
| SPRHA421R0423.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
FLAP,WING-LEADING EDGE, ASSY OF F-16
2. PART NUMBER:
16W022-890
3. NATIONAL STOCK NUMBER:
1560-01-506-1768WF
PREPARED BY:
RAYMOND PARK
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
20210115
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.
8. USE MATERIAL PER SAE AMS-QQ-A-250/( ) IN LIEU OF QQ-A-250/( ).
9. 16PR100 IS NOT REQUIRED FOR MANUFACTURING AND WILL NOT BE FURNISHED.
10. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA 16W043-138, 16W329-8, 16W370-9 AND 16W391-8 FOR MANUFACTURE.
File details come from the government source that posted it. Updated .