EDR.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

FAIRING, AIRCRAFT

2. PART NUMBER:

188-3400-1

3. NATIONAL STOCK NUMBER:

1560-01-414-4003WF

PREPARED BY:

TIM LUCAS

OFFICE SYMBOL:

416 SCMS/GUMAE

DATE:

02/14/2013

HILL AFB FORM 462 Page 1 of 1

4. IUID (item unique identifier) requirements and expectations which the contractor must ensure are complied with.

A. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.

B. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.

C. Use HRI (human readable) and machine readable matrix. (USAF not equiped to read barcode).

D. IUID matrix needs to be highly visible, in a location easily accessible.

E. IUID marking must be permanent.

F. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418

I. IUID marking specifications.

1. Minimum 1/8 inch lettering on human readable to include:

a. Cage (17V)

b. P/N (1P)

c. Serial number (is)

2. Minimum 1/4 inch square on machine readable 2D matrix -construct 2 - to include

a. Cage (17V)

b. P/N (1P)

c. Serial number (is)