EDR.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

FLAPERON, WING ASSEBLY OF (F-16)

2. PART NUMBER:

16W021-51

3. NATIONAL STOCK NUMBER:

1560-01-205-8437WF

PREPARED BY:

DON WILLMOTH

OFFICE SYMBOL:

416 SCMS/GUEAA

DATE:

20200205

HILL AFB FORM 462 Page 1 of 2

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE

SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

AIA/NAS NASM15795 IN LIEU OF MS15795

AIA/NAS NASM21042 IN LIEU OF MS21042

AIA/NAS NASM21297 IN LIEU OF MS21297

AIA/NAS NASM20426 IN LIEU OF MS20426

AIA/NAS NASM90353 IN LIEU OF MS90353

AIA/NAS NASM90354 IN LIEU OF MS90354

ASTM E2375 IN LIEU OF MIL-I-8950

SAE AMS-STD-2154 IN LIEU OF MIL-STD-2154

MIL-PRF-46010 IN LIEU OF MIL-L-46010

5. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY

SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT

ENGINEERING ACTIVITY.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT

PRIOR APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.

7. MATERIAL PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4 AND SAE AMS-QQ-A-225/8 IN LIEU OF QQ-A-225/6.

8. MARK AND IDENTIFY PER MIL-STD-130 IN LIEU OF FPS-3008.

9. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA 16W021-51, 16W511-9, 16W580-13, -17, - 21, -29, -30, -31, -32, -33, -34 FOR

THE MANUFACTURE OF 16W021-51.

10. M16W505, M16W510, M16W512, M16W530, M16W580 ARE UN-DIMENSIONED AND REQUIRE A FULL SCALE STABLE BASE

MYLAR. THIS WILL BE FURNISHED TO CONTRACT AWARDEE.

11. MANUFACTURE PART USING THE FOLLOWING EFFECTIVITY FLAG: Open E, F, G, H, J, K, L, N, P, R, U, V, W, Y, Z, AA, AC, AD, AE, AF, AG, AH, AJ, AK, AL.

12. MASTER TOOLING IS REQUIRED TO MAKE THIS PART. TOOL NUMBER: 150381 SERIAL NUMBER: T70836F. THE GOVERNMENT DOES NOT HAVE ACCESS TO THIS MASTER TOOLING. ANY MANUFACTURERS WHO WISH TO OBTAIN THIS TOOLING MUST

CONTACT LOCKHEED MARTIN CO.

13. INTERCHANGEABILITY AND REPLACEABILITY REQUIREMENTS DO APPLY TO THIS ITEM. ALL MATE WITH HOLES WILL BE

DRILLED IN ACCORDANCE WITH THE DRAWING DIMENSIONS AND TOLERANCES. THE CONTRACT AWARDEE WILL BE REQUIRED TO DEVELOP HIS OWN METHOD OF CONTROLLING THE HOLE LOCATIONS ON THE FIRST ARTICLE AND USE THE SAME TOOLING OR METHOD TO ASSURE REPEATABILITY ON PRODUCTION ARTICLES. NOTE: PART MUST MATCH WITH MATING STRUCTURE.

14. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE

COMPLIED WITH.

15. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.

A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY

DELETE EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

FLAPERON, WING ASSEBLY OF (F-16)

2. PART NUMBER:

16W021-51

3. NATIONAL STOCK NUMBER:

1560-01-205-8437WF

PREPARED BY:

DON WILLMOTH

OFFICE SYMBOL:

416 SCMS/GUEAA

DATE:

20200205

HILL AFB FORM 462 Page 2 of 2

B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).

C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.

D. IUID MARKING MUST BE PERMANENT.

E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418

F. IUID MARKING SPECIFICATIONS.

1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:

A. CAGE (17V)

B. P/N (1P)

C. SERIAL NUMBER (IS)

2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE

A. CAGE (17V)

B. P/N (1P)

C. SERIAL NUMBER (IS)