EDR.pdf
PDF 225 KB Posted
- Attached to
- F-16 Cylinder Assembly, A Federal contract opportunity
- Solicitation number
- SPRHA4-26-Q-0554
- Issued by
- Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Attachment "A") for manufacturing a Hydraulic Actuator for the F-16 Main Landing Gear (MLG) Door/Uplock system. The document was prepared by Bill Garcia of the 416 SCMS/GUEAA office at Hill Air Force Base on 7 March 2024. The part number is 16VH201-5, and the National Stock Number is 1650-01-417-8526WF.
The document establishes manufacturing requirements and constraints for the actuator production. Military specifications and standards referenced in the bid set will not be furnished separately. All source materials and suppliers listed on the applicable standards, specifications, and drawings are mandatory; no substitutions are permitted without prior approval from the OO-ALC Cognizant Engineering Activity. Deviations from control drawing specifications are prohibited without written approval from OO-ALC Engineering (416 SCMS/GUEAA). Additionally, Unique Identification (UID) marking must be applied to each end-item actuator in accordance with Drawing 16VH201, Engineering Order 12C0773-H.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| MQR.pdf | ||
| SPRHA426Q0554.pdf | ||
| EDL.pdf | ||
| Unmarked Eng Data 2022.pdf | ||
| SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR ‐ HYDRAULIC, MLG DOOR/UPLOCK (F‐16)
2. PART NUMBER:
16VH201‐5
3. NATIONAL STOCK NUMBER:
1650‐01‐417‐8526WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
7 MARCH 2024
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA
WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY OO‐ALC COGNIZANT ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY OO‐ALC ENGINEERING (416 SCMS/GUEAA).
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED TO EACH END‐ITEM PER DRAWING 16VH201, EO 12C0773-H.
File details come from the government source that posted it. Updated .