EDR.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

PANEL INSTALLATION (SKIN) (T-38)

2. PART NUMBER:

3-10811-169

3. NATIONAL STOCK NUMBER:

1560-01-445-0163XE

PREPARED BY:

JOHN MARTINEZ

OFFICE SYMBOL:

416 SCMS/GUMB

DATE:

11/07/2011

HILL AFB FORM 462 Page 1 of 1

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE

SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

5. MARK & IDENTIFY PER MIL-STD-130 IN LIEU OF IM-8

6. PRACTICES FOR MAGNESIUM ALLOY PER MA-98 IN LIEU OF MA-97

7. MAGNESIUM ALLOY SHEET PER SAE AMS 4375 IN LIEU OF QQ-M-44

8. FABRICATE PER MA-122 IN LIEU OF MA-32.1

9. FORMING PER MA-123 IN LIEU OF MA-32.2

10. FINISH PART IN ACCORDANCE WITH DRAWING FINISH REQUIREMENTS UP TO AND INCLUDING PRIMER

APPLICATION, HOWEVER, OMIT ANY PAINT TOPCOAT APPLICATION.

11. TAG PART WITH THE FOLLOWING: MATCH TOP COAT AND EXTERIOR MARKINGS UPON INSTALLATION.

12. ADD ADDITIONAL .25 INCH TRIM MATERIAL TO ALL EXTERIOR EDGES OF THE PART.

13. DRILL & DIMPLE HOLES UPON INSTALLATION