EDR.pdf
PDF 111 KB Posted
- Attached to
- F-16 Cover, Access Federal contract opportunity
- Solicitation number
- SPRHA4-26-Q-0982
- Issued by
- Defense Logistics Agency Aviation
About this file
This document is an Engineering Data Requirements attachment providing manufacturing instructions for an F-16 Engine Access Cover. The specific part number is 16B6592-815, with National Stock Number 1560-01-273-4300WF. The document details unique identification requirements per MIL-STD-130, specifying minimum 1/8-inch human-readable labeling and 1/4-inch square machine-readable 2D matrix labels that must include CAGE code, part number, and serial number. Material specifications require aluminum alloy forgings per SAE AMS-QQ-A-367 and aluminum alloy 2024 per SAE AMS-QQ-A-250/4, with a strict requirement that any material substitutions must receive prior approval from the cognizant engineering activity. Prepared by Don Willmoth from the 416 SCMS/GUEAA office at Hill Air Force Base on September 29, 2020, the document emphasizes that certain technical documents (16PR100 and 16PR006) will not be provided for manufacturing.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA426Q0982.pdf | ||
| CDRLFATR.pdf | ||
| MQR.pdf | ||
| SOW.pdf | ||
| SPI.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
COVER, ENGINE ACCESS F-16
2. PART NUMBER:
16B6592-815
3. NATIONAL STOCK NUMBER:
1560-01-273-4300WF
PREPARED BY:
DON WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
SEPT 29, 2020
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY
SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008.
A. Minimum 1/8th inch on Human readable to include:
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
B. Minimum 1/4 inch square on Machine Readable 2D Matrix – construct 2 – to include
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
C. Label shall contain all data on existing label, if existing label is to be replaced.
D. Same Label Material shall be used as specified in drawing for existing label.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418
7. IF DEVIATIONS FROM THESE INSTRUCTIONS ARE REQUIRED OR DESIRED, PERMISSION FROM GOVERNMENT
ENGINEER IS REQUIRED.
8. 16PR100 IS NOT REQUIRED FOR MANUFACTURE.
9. 16PR006 WILL NOT BE PROVIDED. REFER TO IGES DATA NUMBERS 16B6566-21, 16B6592-815, 16B6898-17 AND
16B6897-17.
10. MATERIAL ALUMINUM ALLOY FORGINGS PER SAE AMS-QQ-A-367 IN LIEU OF QQ-A-367.
11. MATERIAL ALUMINUM ALLOY 2024 PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.
File details come from the government source that posted it. Updated .