EDR.pdf
PDF 105 KB Posted
- Attached to
- F-16 Fuel Cells Federal contract opportunity
- Solicitation number
- SPRHA4-25-R-0381
- Issued by
- Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements (EDR) document specifying manufacturing requirements for a forward-removable single-plate aircraft fuselage fuel tank (Part Number 16VB004001-3, NSN 1560-01-322-9987WF) for the Defense Logistics Agency Aviation.
The document outlines Item Unique Identifier (IUID) requirements, mandating that contractors must include both human-readable and machine-readable matrix markings. Specific requirements include minimum 1/8 inch lettering for human-readable information (CAGE, part number, and serial number) and minimum 1/4 inch square 2D matrix markings. The document emphasizes that military specifications/standards will not be furnished in the bid set, deviations from control drawing specifications require prior OO-ALC Engineering approval, and all IUID markings must be permanent and highly visible in accessible locations. The requirements reference several standards including MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA425R0381.pdf | ||
| CDRLFATR.pdf | ||
| EDL.pdf | ||
| SOW.pdf | ||
| SPI.pdf | ||
| MQR.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
FUEL TANK, FUSELAGE SGL PL ACFT, FWD REM
2. PART NUMBER:
16VB004001-3
3. NATIONAL STOCK NUMBER:
1560-01-322-9987WF
PREPARED BY:
DONALD WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
10/2/2018
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
8. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE
EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
File details come from the government source that posted it. Updated .