EDR.pdf
PDF 111 KB Posted
- Attached to
- JTE Cooler, Air, Evaporat Federal contract opportunity
- Solicitation number
- SPRHA5-25-Q-0074
- Issued by
- Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Attachment "A") specifying manufacturing instructions for a Thermoelectric Cooler, 1500 BTU (AN/TSQ-T10) with part number A2500-200002 and National Stock Number 4120015989070FD. The document is prepared by the 415 SCMS/GUEA office at Hill AFB and dated May 2, 2024.
The document outlines specific requirements for Unique Identification (UID) labeling that must be applied per MIL-STD-130 instead of FPS-3008. Key requirements include human readable text minimum 1/8th inch containing CAGE (17V), P/N (1P), and Serial Number (1S), plus a machine readable 2D matrix minimum 1/4 inch square with the same information. The document emphasizes that material substitutions and specification deviations require prior engineering approval, and any replacement labels must maintain all existing label data using the same label material specified in the original drawing.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| MQR.pdf | ||
| EDL.pdf | ||
| SOW.pdf | ||
| SPRHA525Q0074.pdf | ||
| CDRLCPP.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
THERMOELECTRIC COOLER, 1500 BTU (AN/TSQ-T10)
2. PART NUMBER:
A2500-200002
3. NATIONAL STOCK NUMBER:
4120015989070FD
PREPARED BY:
WYATT SNARE
OFFICE SYMBOL:
415 SCMS/GUEA
DATE:
MAY. 2, 2024
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE / MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .