EDR.pdf
PDF 82 KB Posted
- Attached to
- F-16 Cover, Access, Aircraft Federal contract opportunity
- Solicitation number
- SPRHA4-24-Q-0536
- Issued by
- Defense Logistics Agency Aviation
About this file
This document is the Engineering Data Requirements (Attachment "A") for the manufacture of a Cover Assy-Ammunition Drum, FS 243.00 to FS 267.40 for the F-16 aircraft. The part number is 16B5510-105 with a National Stock Number of 1560-01-649-8849WF. The document provides instructions and specifications for the manufacture of this item, including the use of certain military standards, sources/materials, and marking requirements. It also addresses the use of lead-free solder, which is considered a flight safety and national security concern. Contractors are required to provide notification and compliance information related to the use of any lead-free components. The Point of Contact for this matter is the Engineering Support Activity (ESA).
The related federal contract opportunity is Solicitation Number SPRHA4-24-Q-0536 for the procurement of one each of NSN 1560-01-649-8849, which is the F-16 Cover, Access, Aircraft. The solicitation is being issued by the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA424Q0536.pdf | ||
| SOW.pdf | ||
| CDRLFATR.pdf | ||
| EDL.pdf | ||
| MQR.pdf | ||
| Unmarked Eng Data 2022.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
COVER ASSY-AMMUNITION DRUM, FS 243.00 TO FS 267.40 F-16
2. PART NUMBER:
16B5510-105
3. NATIONAL STOCK NUMBER:
1560-01-649-8849WF
PREPARED BY:
GEORGE SLAUGHTER
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
20240228
HILL AFB FORM 462 Page 1 of 2
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.
8. USE MATERIAL PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.
9. 16PR100 WILL NOT BE FURNISHED.
10. 16PR006 WILL NOT BE FURNISHED. USE IGES LOFT DATA 16B5510-71 FOR MANUFACTURE.
11. EFFECTIVITY FLAGS: OPEN B, OPEN C, OPEN E
12. EFFECTIVE 9 MAY 2005 THE DEPARTMENT OF THE AIR FORCE ISSUED AN AIR WORTHINESS ADVISORY (M-05-01) REGARDING THE USE OF LEAD-FREE SOLDER IN ELECTRICAL AND ELECTRONIC MILITARY PRODUCTS. TO DATE, NO LEAD-FREE SOLDER FORMULATION HAS MATCHED THE RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD LEADED SOLDERS. THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE LEAD-FREE SOLDER REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE AIR FORCE WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATIBILITY, AND RELIABILITY STANDARDS PREVIOUSLY ESTABLISHED WITH LEADED SOLDERS. FAILURE TO DO SO, COULD ADVERSELY IMPACT THE
PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING NATIONAL SECURITY.
13. THE USE OF LEAD-FREE SOLDER OR LEAD-FREE PLATED COMPONENTS IN MILITARY ELECTRONIC PRODUCTS IS CONSIDERED A FLIGHT SAFETY AND NATIONAL SECURITY CONCERN. FOR THIS REASON, THE US AIR FORCE WANTS TO BE NOTIFIED WHEN LEAD-FREE COMPONENTS AND MANUFACTURING PROCESSES HAVE BEEN IMPLEMENTED. AS PART OF SATISFACTORY COMPLIANCE WITH THE REQUIREMENTS OF THIS CONTRACT, THE US AIR FORCE REQUIRES
NOTIFICATION ON A NO-COST BASIS WHEN ANY OF THE FOLLOWING CONDITIONS EXIST:
1. COMMERCIAL OFF-THE-SHELF (COTS) OR ANY OTHER ELECTRICAL COMPONENTS THAT CONTAIN LEAD-FREE SOLDER
OR LEAD-FREE PLATED COMPONENTS ARE USED IN THE END-ITEM.
2. ANY LEAD-FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED WITH A
SEPARATE PART NUMBER OR DESIGNATION.
14. IF NO LEAD-FREE, LEAD-FREE PLATED COTS OR ANY OTHER LEAD-FREE ELECTRICAL OR ELECTRONICS COMPONENTS EXIST IN THE MANUFACTURED END-ITEM, THE CONTRACTOR SHALL PROVIDE WRITTEN CERTIFICATION
OF COMPLIANCE AS A DELIVERABLE WITH THE CONTRACT.
1. USE INDUSTRY STANDARD IPC-1066, "MARKING, SYMBOLS AND LABELS FOR IDENTIFICATION OF LEAD-FREE AND
OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES"
2. INCLUDE THE PROGRAM ENGINEER'S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY "LEAD-FREE" MILITARY PART(S) IN REFERENCE TO ITS RELIABILITY, PERFORMANCE AND COMPATIBILITY FOR THE SYSTEM.
15. POC FOR THIS MATTER IS THE ENGINEERING SUPPORT ACTIVITY (ESA).
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
COVER ASSY-AMMUNITION DRUM, FS 243.00 TO FS 267.40 F-16
2. PART NUMBER:
16B5510-105
3. NATIONAL STOCK NUMBER:
1560-01-649-8849WF
PREPARED BY:
GEORGE SLAUGHTER
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
20240228
HILL AFB FORM 462 Page 2 of 2
File details come from the government source that posted it. Updated .