EDR.pdf
PDF 90 KB Posted
- Attached to
- F-16 Circuit Card Assembly Federal contract opportunity
- Solicitation number
- SPRHA4-24-Q-0467
- Issued by
- Defense Logistics Agency Aviation
About this file
This document is an Engineering Data Requirements (EDR) attachment for the manufacture of a Circuit Card Assembly (F-16) with part number 2216930-101 and national stock number 5998-01-505-7076. The EDR specifies the applicable military specifications, standards, and data that must be used in the manufacturing process. It also provides detailed requirements for the unique identification (UID) markings that must be applied to the items, including the cage code, part number, and serial number. Substitutions or deviations from the specified requirements are not authorized without prior engineering approval. The EDR is referenced in the related federal contract opportunity for the procurement of 2 EA of the F-16 Circuit Card Assembly, solicited by the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| EDL.pdf | ||
| CDRLCPP.pdf | ||
| SPRHA424Q0467.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CIRCUIT CARD ASSEMBLY (F-16)
2. PART NUMBER:
2216930-101
3. NATIONAL STOCK NUMBER:
5998015057076WF
PREPARED BY:
ADRIAN GUSTAI
OFFICE SYMBOL:
416 SCMS/
DATE:
NOV. 16, 2021
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED
DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY COGNIZANT ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008.
A. Minimum 1/8th inch on Human readable to include:
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
B. Minimum 1/4 inch square on Machine Readable 2D Matrix – construct 2 – to include
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
C. Label shall contain all data on existing label, if existing label is to be replaced.
D. Same Label Material shall be used as specified in drawing for existing label.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418
File details come from the government source that posted it. Updated .