EDR.pdf
PDF 118 KB Posted
- Attached to
- F-16 Transmitter, Angle O Federal contract opportunity
- Solicitation number
- SPRHA4-24-Q-0475
- Issued by
- Defense Logistics Agency Aviation
About this file
This document outlines engineering data requirements for the manufacture of a transmitter, angle of attack. Key details include:
The engineering data requirements attachment provides instructions for the manufacture of a transmitter, angle of attack with part number 16VC034-2 and national stock number 6610-01-253-1448. Specifications include requirements for Item Unique Identification marking on the product and notification to the government of any lead-free components per the terms outlined. Additionally, the related federal contract opportunity is for five transmitters, angle of attack with the same national stock number through the Defense Logistics Agency Aviation. This is designated as a 100% small business set-aside.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA424Q0475.pdf | ||
| EDL.pdf | ||
| SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
TRANSMITTER, ANGLE OF ATTACK
2. PART NUMBER:
16VC034-2
3. NATIONAL STOCK NUMBER:
6610-01-253-1448
PREPARED BY:
RICHARD DAY
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
15 FEBRUARY 2024
HILL AFB FORM 462 Page 1 of 2
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA
WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT OO‐ALC
ENGINEERING ACTIVITY.
6. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE COMPLIED WITH: CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE EXISTING
LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL‐STD‐130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX ‐CONSTRUCT 2 ‐ TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
9. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL‐STD‐2000 THAT APPLIES TO AIRCRAFT SOLDERING FOR ALL SOLDERING REQUIREMENTS. *NOTE: J‐STD‐001 MAY BE USED IN LIEU OF MIL‐STD‐2000, IF SPECIFICATION MEETS OR
EXCEEDS MIL‐STD‐2000.
10. EFFECTIVE 9 MAY 2005 THE DEPARTMENT OF THE AIR FORCE ISSUED AN AIR WORTHINESS ADVISORY (M‐05‐01) REGARDING THE USE OF LEAD‐FREE SOLDER IN ELECTRICAL AND ELECTRONIC MILITARY PRODUCTS. TO DATE, NO LEAD‐FREE SOLDER FORMULATION HAS MATCHED THE RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD LEADED SOLDERS.
THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE LEAD‐FREE SOLDER REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE AIR FORCE WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATIBILITY, AND RELIABILITY STANDARDS PREVIOUSLY ESTABLISHED WITH LEADED SOLDERS. FAILURE TO DO SO, COULD ADVERSELY IMPACT THE PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING NATIONAL
SECURITY.
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
TRANSMITTER, ANGLE OF ATTACK
2. PART NUMBER:
16VC034-2
3. NATIONAL STOCK NUMBER:
6610-01-253-1448
PREPARED BY:
RICHARD DAY
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
15 FEBRUARY 2024
HILL AFB FORM 462 Page 2 of 2
THE USE OF LEAD‐FREE SOLDER OR LEAD‐FREE PLATED COMPONENTS IN MILITARY ELECTRONIC PRODUCTS IS CONSIDERED A FLIGHT SAFETY AND NATIONAL SECURITY CONCERN. FOR THIS REASON, THE US AIR FORCE WANTS TO BE NOTIFIED WHEN LEAD‐FREE COMPONENTS AND MANUFACTURING PROCESSES HAVE BEEN IMPLEMENTED. AS PART OF SATISFACTORY COMPLIANCE WITH THE REQUIREMENTS OF THIS CONTRACT THE US AIR FORCE REQUIRES NOTIFICATION ON A
NO‐COST BASIS WHEN ANY OF THE FOLLOWING CONDITIONS EXIST:
10.1 COMMERCIAL OFF‐THE‐SHELF (COTS) OR ANY OTHER ELECTRICAL COMPONENTS THAT CONTAIN LEAD‐FREE SOLDER OR
LEAD‐FREE PLATED COMPONENTS ARE USED IN THE END‐ITEM.
10.2 ANY LEAD‐FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED WITH A
SEPARATE PART NUMBER OR DESIGNATION.
10.2 IF NO LEAD‐FREE, LEAD‐FREE PLATED COTS OR ANY OTHER LEAD‐FREE ELECTRICAL OR ELECTRONICS COMPONENTS EXIST IN THE MANUFACTURED END‐ITEM, THE CONTRACTOR SHALL PROVIDE WRITTEN CERTIFICATION OF COMPLIANCE AS A
DELIVERABLE WITH THE CONTRACT.
10.3 USE INDUSTRY STANDARD IPC‐1066, "MARKING, SYMBOLS AND LABELS FOR IDENTIFICATION OF LEAD‐FREE AND OTHER
REPORTABLE MATERIALS IN LEAD‐FREE ASSEMBLIES, COMPONENTS AND DEVICES."
10.4 INCLUDE THE PROGRAM ENGINEER'S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY "LEAD‐FREE" MILITARY PART(S) IN REFERENCE TO ITS' RELIABILITY, PERFORMANCE AND COMPATIBILITY FOR THE SYSTEM.
8. IF DEVIATIONS FROM THESE INSTRUCTIONS ARE REQUIRED OR DESIRED, PERMISSION FROM GOVERNMENT ENGINEER IS
REQUIRED.
File details come from the government source that posted it. Updated .