EDR.pdf
PDF 111 KB Posted
- Attached to
- F-16 Cover, Access, Aircraft Federal contract opportunity
- Solicitation number
- SPRHA4-24-Q-0239
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of a Cover, Engine Access for an F-16 aircraft. It identifies the part number as 16B6592-815 and national stock number as 1560-01-273-4300WF. Specifications and standards referenced include MIL-STD-130 for unique identification marking and SAE AMS specifications for aluminum alloy forgings and aluminum alloy 2024 in lieu of other specifications. It requires government engineering approval for any deviations and references related IGES data numbers but not 16PR100 or 16PR006. Material substitutions are only allowed with prior government engineering approval.
The related federal contract opportunity is solicitation number SPRHA4-24-Q-0239 for the Defense Logistics Agency Aviation for one each of the identified national stock number cover. It provides an opportunity for the manufacture of the F-16 engine access cover according to the engineering data requirements.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| MQR.pdf | ||
| EDL.pdf | ||
| SPI.pdf | ||
| SPRHA424Q0239.pdf | ||
| CDRLFATR.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
COVER, ENGINE ACCESS F-16
2. PART NUMBER:
16B6592-815
3. NATIONAL STOCK NUMBER:
1560-01-273-4300WF
PREPARED BY:
DON WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
SEPT 29, 2020
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY
SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008.
A. Minimum 1/8th inch on Human readable to include:
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
B. Minimum 1/4 inch square on Machine Readable 2D Matrix – construct 2 – to include
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
C. Label shall contain all data on existing label, if existing label is to be replaced.
D. Same Label Material shall be used as specified in drawing for existing label.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418
7. IF DEVIATIONS FROM THESE INSTRUCTIONS ARE REQUIRED OR DESIRED, PERMISSION FROM GOVERNMENT
ENGINEER IS REQUIRED.
8. 16PR100 IS NOT REQUIRED FOR MANUFACTURE.
9. 16PR006 WILL NOT BE PROVIDED. REFER TO IGES DATA NUMBERS 16B6566-21, 16B6592-815, 16B6898-17 AND
16B6897-17.
10. MATERIAL ALUMINUM ALLOY FORGINGS PER SAE AMS-QQ-A-367 IN LIEU OF QQ-A-367.
11. MATERIAL ALUMINUM ALLOY 2024 PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.
File details come from the government source that posted it. Updated .