EDR.pdf
PDF 245 KB Posted
- Attached to
- MILSTAR Gyroscope Federal contract opportunity
- Solicitation number
- SPRHA324R0213
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering instructions for the manufacture of a rate gyroscope for the MILSTAR program. It specifies that the gyroscope is to be manufactured according to part number 6499-332139-1 and national stock number 6615-01-321-3855MZ. The instructions reference military specifications and standards that will govern manufacture. Unique identification labeling is required per MIL-STD-130, including both human and machine readable coding of the commercial and government entity number, part number, and serial number. Prior to contract award, manufacturers must certify full compliance with all drawings, specifications, and standards for the gyroscope's assembly. The related federal contract opportunity is solicitation number SPRHA324R0213 for MILSTAR gyroscopes issued by the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| CDRL_FATP.pdf | ||
| CDRL_FATR.pdf | ||
| Pkg_SOW.pdf | ||
| Unmarked Eng Data 2022.pdf | ||
| MQR.pdf | ||
| SPRHA324R0213.pdf | ||
| CDRL_CPP.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV:
ENGINEERING INSTRUCTIONS
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RATE GYROSCOPE, MILSTAR
2. PART NUMBER:
6499-332139-1
3. NATIONAL STOCK NUMBER:
6615-01-321-3855MZ
PREPARED BY:
ANDREW WEBB
OFFICE SYMBOL:
415TH SCMS
DATE:
11/14/2023
HILL AFB FORM 462
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.i
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL BY
THE COGNIZANT ENGINEERING ACTIVITY.
7. SYSTEM ENGINEER RETAINS ALL RIGHTS TO REVIEW AND ACCEPT DISCREPANT ITEM PRIOR TO SHIPMENT. ANY DEVIATION FROM THE ENGINEERING DRAWING SHALL BE SUBMITTED FOR ENGINEERING REVIEW AND DISPOSITION.
8. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL COMPLIANCE WITH DRAWINGS, SPECIFICATIONS AND STANDARDS CALLED OUT AND REQUIRED FOR THE MANUFACTURE OF THIS ASSEMBLY. THE CONTRACTOR IS RESPONSIBLE TO COMPLETELY SEARCH THESE DRAWINGS, SPECIFICATIONS AND STANDARDS AND FULLY
UNDERSTAND THE REQUIREMENTS NECESSARY TO MANUFACTURE THE ITEM.
9. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130:
a. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
i. CAGE (17V)
ii. P/N (1P)
iii. SERIAL NUMBER (1S)
b. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
i. CAGE (17V)
ii. P/N (1P)
iii. SERIAL NUMBER (1S)
c. LABEL SHALL CONTAI/N ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
d. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
e. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
REV:
ENGINEERING INSTRUCTIONS
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RATE GYROSCOPE, MILSTAR
2. PART NUMBER:
6499-332139-1
3. NATIONAL STOCK NUMBER:
6615-01-321-3855MZ
PREPARED BY:
ANDREW WEBB
OFFICE SYMBOL:
415TH SCMS
DATE:
11/14/2023
HILL AFB FORM 462
i
File details come from the government source that posted it. Updated .