EDR.pdf
PDF 68 KB Posted
- Attached to
- F-16 Actuator Federal contract opportunity
- Solicitation number
- SPRHA424R0187
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of an electromechanical rotary single-place canopy actuator for the F-16 aircraft. The requirements include the part number, national stock number, applicable specifications and standards such as MIL-STD-130 in lieu of FPS-3008, and unique identification marking requirements per drawing number and location. Deviations from control drawings are not authorized without approval from the 416th Supply Chain Management Squadron at Hill Air Force Base. The related federal contract opportunity is solicitation number SPRHA424R0187 for F-16 actuators from the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA424R0187_______0001 CUI.pdf | ||
| Unmarked Eng Data 2022.pdf | ||
| SOW.pdf | ||
| MQR.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR, CANOPY-ELECTROMECHANICAL, ROTARY, SINGLE PLACE (F-16)
2. PART NUMBER:
16VK056001-1
3. NATIONAL STOCK NUMBER:
1680-01-505-0663WF
PREPARED BY:
DON WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
12 SEPTEMBER 2017
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY
SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY OO-ALC COGNIZANT
ENGINEERING ACTIVITY. (416 SCMS/GUEAA)
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING. (416 SCMS/GUEAA)
7. MARK PER MIL-STD-130 IN LIEU OF FPS-3008.
8. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER AF DRAWING 200733803-05 OR EQUIVALENT. LOCATION OF
UID MARKING SHALL BE PER DRAWING 16VK056001, ZONE B5 WHERE THE NOTE “ACCEPTABLE NAME PLATE
LOCATIONS” APPLIES.
File details come from the government source that posted it. Updated .