EDR.pdf
PDF 46 KB Posted
- Attached to
- Heads-Up Display Federal contract opportunity
- Solicitation number
- SPRHA4-20-R-0923
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains engineering data requirements for an enclosure assembly part number 46431110-30. It specifies that specifications and standards will be used in lieu of the data indicated, including using material per SAE AMS-QQ-A-250/11 in lieu of QQ-A-250/11. It also outlines IUID (Item Unique Identifier) requirements and expectations, specifying that contractors' drawings shall be changed or supplemented for IUID compliance. Requirements for the IUID matrix and human readable marking are provided, including minimum lettering sizes, data elements, and applicable specifications.
The related federal contract opportunity is solicitation number SPRHA4-20-R-0923 for heads-up displays to be provided to the Defense Logistics Agency Aviation. Contractors are instructed to send their CAGE code and physical address to a point of contact to receive further details regarding this opportunity.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA420R0923_______0002.pdf | ||
| SPRHA420R0923_______0001.pdf | ||
| SOW.pdf | ||
| SPRHA420R0923.pdf | ||
| MQR.pdf | ||
| SPI.pdf | ||
| CDRL_FATR.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ENCLOSURE ASSEMBLY, F-16 IASHM
2. PART NUMBER:
46431110-30
3. NATIONAL STOCK NUMBER:
1270-01-514-2683WF
PREPARED BY:
JED FOY
OFFICE SYMBOL:
DATE:
7/17/2019
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. USE MATERIAL PER SAE AMS-QQ-A-250/11 IN LIEU OF QQ-A-250/11.
8. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
9. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY
DELETE EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
File details come from the government source that posted it. Updated .