EDR.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

CHAMBER, COMBUSTION ANNULAR (F-15)

PART NUMBER:

367741-2

NATIONAL STOCK NUMBER:

2835-01-473-2612RP

PREPARED BY:

NEWQUIST, DANIEL

OFFICE SYMBOL:

419 SCMS / GUEA

DATE:

12 April 2021

HILL AFB FORM 462

1. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE

SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

2. CONTRACTOR IS RESPONSIBLE TO COMPLETELY RESEARCH THESE MANUALS, SPECIFICATIONS, AND

STANDARDS AND FULLY UNDERSTAND THE REQUIREMENTS NECESSARY FOR MANUFACTURE OF

COMPONENT PARTS AND ASSEMBLIES. ALL DEVIATIONS, MINOR AND MAJOR, FROM THE ENGINEERING DRAWING PACKAGE SHALL BE SUBMITTED TO THE ENGINEERING ORGANIZATION LISTED IN THE OFFICE SYMBOL BLOCK LOCATED AT THE BOTTOM OF THIS DOCUMENT FOR COORDINATION AND APPROVAL.

3. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL COMPLIANCE WITH MANUALS, SPECIFICATIONS, AND STANDARDS CALLED OUT AND REQUIRED FOR THE

MANUFACTURE OF THIS CONTRACTED COMPONENT/ASSEMBLY. CONTRACTOR IS RESPONSIBLE TO

COMPLETELY SEARCH THESE MANUALS, SPECIFICATIONS AND STANDARDS AND FULLY UNDERSTAND THE REQUIREMENTS NECESSARY TO MANUFACTURE THIS COMPONENT. ANY QUESTIONS CAN BE FORWARDED TO THE ENGINEERING ORGANIZATION LISTED IN THE OFFICE SYMBOL BLOCK OF THIS DOCUMENT BY

CONTACTING THE GOVERNMENT CONTRACTING OFFICIAL.

4. ITEM UNIQUE IDENTIFICATION (IUID) IS REQUIRED, REFERENCE MIL-STD-130. SPECIFIC INSTRUCTIONS FOR

MARKING METHODS, LOCATION, CONTENT, AND FORMAT SHALL BE SPECIFIED BY THE CONTRACTOR AND SUBMITTED TO THE GOVERNMENT FOR APPROVAL PRIOR TO CONTRACT DELIVERY. THE CONTRACTOR MUST DEMONSTRATE THAT THE MARKING DOES NOT ADVERSELY AFFECT ITEM INTEGRITY OR PERFORMANCE AND WILL REMAIN READABLE AND ATTACHED THROUGHOUT THE USEABLE LIFE OF THE ITEM. THE ITEM SHALL BE MARKED IN A HIGHLY VISIBLE AND EASILY ACCESSIBLE AREA UNLESS IT INTERFERES WITH PART FUNCTIONALITY. THE CONTRACTOR SHALL OBTAIN WRITTEN APPROVAL OF THE PROPOSED MARKING METHOD PRIOR TO IUID APPLICATION AND CONTRACT DELIVERY. THE USAF IS CURRENTLY MARKING SOME OF THE PARTS THAT FALL UNDER THE UID MARKING CRITERIA AND WOULD BE WILLING TO SHARE SOME OF

THIS INFORMATION WITH THE CONTRACTOR IF NEEDED.