EDR.pdf

HILL AFB IMT 462, 20060123, V1 Page 1 of 1

REVISION

ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF

PANEL, POWER DISTRIBUTION F-16

2. PART NUMBER

16E2504-873

3. NATIONAL STOCK NUMBER

6110-01-465-1083WF

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC. WILL BE USED IN LIEU OF THE DATA INDICATED. THE

SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR

APPROVAL BY OO-ALC ENGINEERING.

7. USE MIL-STD-130 IN LIEU OF FPS-3008.

8. PART MARKING AS PER MIL-STD-130 IN LIEU OF FPS-3008.

9. PAGE 7, PARAGRAPH 3.2.3.2 OF 16PR145, REVISION "G" DOES NOT APPLY.

10. USE 16PR8817 IN CONJUNCTION WITH 16PR145 FOR MANUFACTURE OF THIS ITEM. SECTION 1, PAGE 1-2, PARAGRAPH 3, NOTE 2 OF 16PR145 DOES NOT APPLY.

11. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL-STD-2000 THAT APPLIES AIRCRAFT SOLDERING FOR ALL SOLDERING REQUIREMENTS.*NOTE: J-STD-001 MAYBE USED IN LIEU OF MIL-STD-

2000, IF SPEC MEETS OR EXCEEDS MIL-STD-2000

12. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT

PRIOR APPROVAL BY OO-ALC ENGINEERING.

13. 16PR106 IS NOT FURNISHED, BRAID PER 16PR8817 (IF APPLICABLE).

14. THE SOURCE FOR ANTI-SABOTAGE LACQUER (MATERIAL 114-136305) IF REQUIRED IS AVAILABLE FROM:

ORANGE PRODUCTS COMPANY

CAGE 01195

PH: 214-438-7321

PREPARED BY

WILLIAM TROESCHER

SYMBOL

GBMAE

DATE

27 MARCH 2008