EDR.pdf
PDF 266 KB Posted
- Attached to
- SPRHA5-23-R-0389 Federal contract opportunity
- Solicitation number
- SPRHA5-23-R-0389
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains engineering data requirements for the manufacture of a power supply identified as Part Number R2C16AD15000. Key details include specifications for applying Unique Identification markings per MIL-STD-130 including human and machine readable markings on the product and any replacement labels. Deviations from control drawings require prior approval from the engineering activity. Specific materials listed in standards, specifications and drawings are the only approved sources without exception. The related solicitation is SPRHA5-23-R-0389 issued by the Defense Logistics Agency Aviation for an unspecified requirement described only as an RFP and attachments.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA523R0389.pdf | ||
| SOW.pdf | ||
| CDRLs.pdf | ||
| SQSS.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
POWER SUPPLY (AN/TPT-T1(V) UMTE)
2. PART NUMBER:
R2C16AD15000
3. NATIONAL STOCK NUMBER:
6130016584911FD
PREPARED BY:
PETER PHAM
OFFICE SYMBOL:
415 SCMS/GUEA
DATE:
JAN. 18, 2023
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE / MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .