EDR.pdf
PDF 49 KB Posted
- Attached to
- Pin Puller Assembly Federal contract opportunity
- Solicitation number
- SPRHA2-22-R-0219
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains engineering data requirements for the manufacture of a pin puller assembly for the LGM-30, as well as information on the related federal contract opportunity. The engineering data requirements provide the part number, national stock number, and specifications including IUID requirements that the contractor must ensure are complied with, such as including human and machine readable data on labeling with specific content and sizing. The related federal contract opportunity is a solicitation from the Defense Logistics Agency Aviation for pin puller assemblies, but no further details are provided on product quantities, response dates, or other salient terms.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA222R0219.pdf | ||
| CDRLTRandCPP.pdf | ||
| SOW.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF A:
PIN PULLER ASSEMBLY FOR THE LGM-30.
2. PART NUMBER:
800-2100-001
3. NATIONAL STOCK NUMBER:
1420-01-583-8291AH
PREPARED BY:
ALAN J LOVELESS
OFFICE SYMBOL:
414 SCMS/GUEA
DATE:
20 JULY 2017
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. IUID (ITEM UNIQUE IDENTIFIER) IS REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE
ARE COMPLIED WITH.
6. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE
EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS,
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
File details come from the government source that posted it. Updated .