EDR.pdf
PDF 46 KB Posted
- Attached to
- Gyroscope Federal contract opportunity
- Solicitation number
- SPRHA3-20-R-0666
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains an engineering data requirements attachment for a rate gyroscope to be used in the MILSTAR system. It specifies that the part number is 6499-332139-1, with a National Stock Number of 6615013213855MZ. Unique identification is required per MIL-STD-130 on both human and machine readable labels. Deviations from control drawings are not authorized without approval. The related federal contract opportunity is a solicitation for 30 gyroscopes to be used in aircraft. The technical data package can be found at the provided link on SAM.gov. The contracting agency is the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Drawing.pdf | ||
| MQR.pdf | ||
| CDRLs.pdf | ||
| SPRHA320R0666.pdf | ||
| EDL.pdf | ||
| SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RATE GYROSCOPE MILSTAR
2. PART NUMBER:
6499-332139-1
3. NATIONAL STOCK NUMBER:
6615013213855MZ
PREPARED BY:
JACKSON ANDRASKO
OFFICE SYMBOL:
415 SCMS/GUMBB
DATE:
FEB 14, 2020
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE / MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .