EDR.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

DOOR ASSY,LOWER STRAKE-FS 158 TO FS 189, F-16

2. PART NUMBER:

16B1590-257

3. NATIONAL STOCK NUMBER:

1560-01-325-4915WF

PREPARED BY:

DONALD WILLMOTH

OFFICE SYMBOL:

416 SCMS/GUEAA

DATE:

20211115

HILL AFB FORM 462 Page 1 of 1

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE

SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY

SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT

ENGINEERING ACTIVITY.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR

APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.

7. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.

8. USE MATERIAL PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.

9. 16PR100 WILL NOT BE FURNISHED.

10. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA 16B1590-53, 16B1881-7, -11, -13 FOR MANUFACTURE.

11. FMS-3029 AND FMS-3033 DRAWINGS ARE LIMITED AND WILL NOT BE FURNISHED, EXCEPT FOR THEIR RESPECTIVE

FQMLs. CLEAN PART AND APPLY PRIMER AS REQUIRED.

12. OPEN BULLET EFFECTIVITY APPLIES TO THE FOLLOWING: A, C, D, H, J, L, P, R, T, U, W, AF, AM, AN, AP, AR, AS, BC, BD.