EDR_CUI.pdf
PDF 607 KB Posted
- Attached to
- F-16 Singal Converter Federal contract opportunity
- Solicitation number
- SPRHA423R0094
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains an engineering data requirements attachment and information on a related federal contract opportunity. The engineering data requirements attachment provides instructions for contractors regarding IUID (Item Unique Identifier) marking requirements, including use of human readable and machine readable matrix markings with specific size and content requirements. Deviations from the instructions require approval from the government engineer.
The related federal contract opportunity is a solicitation from the Defense Logistics Agency Aviation for an F-16 signal converter. The requirement is open only to approved sources BAE and Ametek. The solicitation provides the name and number, opportunity type, a brief description of the requirement, and identifies the procuring agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA423R0094_______0003.pdf | ||
| CPP_CUI.pdf | ||
| SPRHA423R0094_______0002.pdf | ||
| SPRHA423R0094_______0001.pdf | ||
| SPRHA423R0094.pdf | ||
| Pkg_SOW_CUI.pdf | ||
| SPI_CUI.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PAGE OF1 PAGES1
Circuit Card Assembly
6014726-001 5895016752571WF
Deviations from specifications identified in drawings are not authorized without prior approval by 416 SCMS/GUMAA Engineering.
Part Marking as per MIL-STD-130 in lieu of FPS-3008
IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b.. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equiped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
If deviations from these instructions are required or desired, permission from government engineer is required.
Adrian Gustai Electronics Engineer 416 SCMS/GUMAA 20221116
REV:
ENGINEERING DATA REQUIREMENTS
(ATTACHMENT "A")
NOTE: MILITARY SPECIFICATIONS I/STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF
2. PART NUMBER 3. NATIONAL STOCK NUMBER
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE
FURNISHED UNLESS SO INDICATED.
PREPARED BY SYMBOL DATE
HILL AFB IMT 462, 20060123, V1 REPLACES HILL AFB IMT 462, 19961001, WHICH IS OBSOLETE.
CUI
CUI
File details come from the government source that posted it. Updated .