EDR_CUI.pdf
PDF 2 MB Posted
- Attached to
- AEWS Slip Ring Assembly Federal contract opportunity
- Solicitation number
- SPRHA522R0455
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of an AEWS ring assembly. It specifies the part number as W71-9-100 with national stock number 5970-01-490-1316QX. Manufacturers must comply with specifications including MIL-STD-130 for applying unique identification and MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418. The related federal contract opportunity is a solicitation from the Defense Logistics Agency Aviation for AEWS slip ring assemblies restricted to PRINCETEL INC (CAGE 7TCS1).
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Pkg_SOW_CUI.pdf | ||
| EDL_CUI.pdf | ||
| CDRL_CPP_CUI.pdf | ||
| SPI_CUI.pdf | ||
| SPRHA522R0455.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RING ASSEMBLY,ELECT (AWES
2. PART NUMBER:
W71-9-100
3. NATIONAL STOCK NUMBER:
5970-01-490-1316QX
PREPARED BY:
THI NGUYEN
OFFICE SYMBOL:
415 SCMS/GUMBA
DATE:
20211123
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA
WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING
ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO
INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE
REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING
LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
CUI
CUI Controlled by: DLA Aviation Ogden Controlled By: AUBA
CUI Category: Controlled Tech info Distribution/ Dissemination Control: FEDCON
POC: michelle.mihu@us.af.mil
File details come from the government source that posted it. Updated .