EDL_EDA.PDF

**Please DOWNLOAD PDF file to local computer and open with Adobe Reader to view contract documents!**

SOURCE QUALIFICATION REQUIREMENTS

(PL98-525, SECTION 2319)

STOCK NR (NSN) 1620-01-261-5177 PART NUMBER (P/N) 2007016-101

NOUN: MLG Retract Actuator Assembly AIRCRAFT: F-16

SECTION C

QUALIFICATION REQUIREMENTS THAT MUST BE SATISFIED TO BECOME A QUALIFIED SOURCE:

1. Because of the need for uninterrupted item support to military aircraft systems while keeping with the requirements of PL 98-525, the current acquisition need not and generally will not be delayed to provide an offeror an opportunity to qualify. Normal acquisition practices at OO-ALC should preclude the denial of opportunity to any interested offeror.

2. The offeror must provide a pre-contract award qualification article, which meets the requirements of the engineering drawings, material specifications, and process specifications. However, successful completion of the qualification testing does not guarantee any contract award. If the offeror is deemed qualified and awarded the contract, a post-contract award first ariticle exhibit may be required to verify production capability.

3. The qualification article will be subjected to form, fit, and function verification as well as required testing to assure compliance with data list and other applicable procurement criteria. The qualification article shall demonstrate full compatibility and comparability with existing parts.

4. The required materials will be procured from a qualified source and shall meet the requirements of their respective specifications. The offeror will assure that the supplier has accomplished this and shall submit certified documentation of accomplishment of the above requirements to the purchaser along with the pre-contract award qualification article.

5. The required forgings shall be procured from the qualified forging source using the original certified forging procedures and dies. Forging material and lot qualifications shall be accomplished as required in the specified forging drawings and specification SAE-AMS-F-7190. The offeror shall assure that this is or has been accomplished by the forging source and will submit certified documentation of accomplishment of the above requirements to the government along with the pre-contract award qualification article.

6. The qualification article once submitted will become subject to such testing as deemed necessary by the U.S. Government to prove that the article meets all dimensional, processing and functional requirements.

Such testing may result in the destruction of the article. Following completion of necessary testing and evaluation, the article no matter what its condition shall be returned to the contractor or disposed of at his discretion and direction whether it was found acceptable or not.

7. Form verification: The U.S. Government's Quality Verification Center (QVC) will be used to insure compliance with the dimensional requirements of the article. Material and processing compliance will also be verified as required.

8. Fit/function verification: Existing components and government test stands and fixtures will be utilized to verify physical interface and functional performance of articles.

9. Testing for material and process compliance.

(a) Material analysis (e) Finish

(b) Heat treat (f) Grain flow

(c) Grinding (g) Other

(d) Plating

SOURCE QUALIFICATION REQUIREMENTS

(PL98-525, SECTION 2319)

STOCK NR (NSN) 1620-01-261-5177 PART NUMBER (P/N) 2007016-101

NOUN: MLG Retract Actuator Assembly AIRCRAFT: F-16

10. Remarks:

a. Organic verification capabilities exist at OO-ALC.

b. Testing requirements outside organic capabilities will be contracted out.

11. The estimated cost of government testing and evaluation is $5000.

12. Maximum time for testing of the qualification article will not exceed 30 days from receipt at testing agency.

SECTION D

QUALIFICATION WAIVER REQUIREMENTS.

1. An offerer who has had previous experience in the manufacture and qualification of items, which can be correlated with this product, may apply to the design control authority at OO-ALC for a waiver of the above stated qualification requirements.

a. The qualification waiver criteria utilized by the design control authority to perform a qualification analysis are available upon request. The qualification waiver criteria may be used as a guide in preparing the offerer's written input to the design control authority.

b. The burden of proof for written inputs is on the offerer. The design control authority will not pursue authenticity verification of claims made by the offerer of product manufacturing experience with other Government or non-Government agencies. Unsubstantiated claims will not be considered in the waiver analysis process.

c. This waiver will be granted if and only if the design control authority (LGHLEN) can establish the qualifications of the offerer through the evaluation of written inputs from the offerer or from previous knowledge of the offerer's capabilities or from previous experience with the offerer on similar item acquisitions. If there is any doubt about the offerer's capability, the offerer will be required to submit a pre-qualification article. There is no guarantee of qualification by similarity. LGHLEN reserves the right to require a pre-qualification article of all offerers.

2. The current acquisition need not and will not be delayed in order to provide an offerer with an opportunity to meet the requirements for qualification waiver.

3. Maximum time for approval of qualification by similarity will not exceed 30 days.

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

1_DATA_ITEM_NO: A001

2_TITLE_OF_DATA_ITEM: Test/Inspection Reports

3_SUBTITLE: Government Testing

4_AUTHORITY_Data_Acquisit: DI-NDTI-80809B

5_CONTRACT_REFERENCE:

6_REQUIRING_OFFICE: 417 SCMS/CL

7_DID_250_REQ: Y

8_APP_CODE:

DIST_STATEMENT: B

10_FREQUENCY: 1

11_AS_OF_DATE: Per contract reqs

12_DATE_OF_FIRST_SUBMISSI: Per contract reqs

13_DATE_OF_SUBSEQUENT_SUB:

addressee1: Preferred method of draft1:

reg1: 1 repro1:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 0 total_repro: 0

16_REMARKS: 1. BLOCK 4: Contractor format acceptable. Paragraph 10.2.3.3 of DI-NDTI-80809B is clarified as follows:

a. All dimensions and tolerances specified on the manufacturing data shall be listed in one column with the actual corresponding reading obtained from the inspection of the parts listed in another column.

b. Materials utilized in the manufacture of the "First Article" item shall be identified and certified along with a copy of material purchase requests as conforming to applicable data requirements.

c. Material processing, including finish requirements (plating, heat treatment, welding, inspecting, anodize, painting, etc.) utilized in the manufacture of the "First Article" item shall be identified and certified as conforming to applicable requirements. A copy of the purchase order certifying the process accomplished at other than contractor facility shall be included.

d. Other requirements as called out with the Technical Data Package.

2. BLOCK 9: Distribution authorized to U.S. Government Agencies only, test and evaluation, 11 March 2016. Other requests for this document shall be referred to 417 SCMS.

3. BLOCKS 10, 11, 12, and 13: Report to assist in the "First Article" testing by the Air Force shall be submitted concurrently with the "First Article" item.

FOB: DESTINATION

INSPECTION/ACCEPTANCE: DESTINATION

17_PRICE_GROUP: NSP

ESTIMATED_TOTAL_PRICE: 0.0

G_PREPARED_BY: Lori Grygier Lead IM, 417 SCMS/GUMD

H_DATE: 20170308

J_DATE: 20170308

Page: 1 reg38t: 1

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT: A

TDP:

TM:

OTHER:

DSYSTEMITEM: First Article

E_CONTRACTPR_NO:

FCONTRACTOR:

of_pages: 1

Reset:

addressee13:

addressee12:

addressee11:

addressee10: 84056-5713 addressee9: Hill AFB, UT addressee8: Non Accountable Bay addressee7: Bldg. 849 Attn:

addressee6: 809 MXSS/MXDEB addressee5: FB2029 addressee4: container:

addressee3: report in First Article addressee2: shipping to include test

2017-03-08T08:31:48-0700

MARTIN.BRAD.H.1256609564

ENGINEERING DATA LIST

DATE:

23 JUL 2021

REVISION: 18 *HISTORY*

CAGE:

13002

PAGE:

NSN:

1620012615177LE

DATA TECH:

Fowers, Jennifer L

END ITEM:

F-16 LANDING GEAR

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMACB/

MANUFACTURER NAME:

GOODRICH CORPORATION

REFERENCE NUMBER:

2007016-101

NOUN:

RETRACT ASSEMBLY

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 17576 2007016 G S D ACTUATOR ASSEMBLY,

HYDRAULIC-RETRACT, MLG

Fowers, Jennifer L 23 JUL 2021

(-101)

NAME: DATE:

S 98747 20A2573-H S D AESO/ENGINEERING ORDER

S 17576 11A1194-H G S D ECO/ENGINEERING CHANGE

ORDER

S 98747 12C2940-H S D ENGINEERING ORDER/AESO

L 17576 2007017 F S D CYLINDER ASSY ACTUATOR Fowers, Jennifer L 23 JUL 2021

(101)

S 98747 20A2574-H S D AESO/ENGINEERING ORDER

L 17576 2007217 S D CYLINDER-RETRACT, MLG

FORGING

(-1)

S 98747 20A2575-H S D AESO/ENGINEERING ORDER

L 17576 2007020 D S D PISTON - RETRACT

ACTUATOR, MLG

S 98747 15A6405-H S D ENGINEERING ORDER/AESO

S 98747 15C0820-H S D ENGINEERING ORDER/AESO

L 17576 2007021 A S D NUT, GLAND-RETRACT

S 98747 19A6453-H S D ENGINEERING ORDER/AESO

L 17576 2007022 B S D BEARING, ACTUATOR,

RETRACT, MLG

S 98747 20A2578-H S D AESO/ENGINEERING ORDER

L 17576 2007024 A S D RETAINER SCRAPER RING

RETRACT ACTUATOR MLG

S 98747 20A2579-H S D AESO/ENGINEERING ORDER

L 17576 2007025 E S D ROD END, ASSEMBLY OF,

ACTUATOR-RETRACT,MLG

S 98747 19A1479-H S D ENGINEERING ORDER/AESO

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 3EDL Version 18Generated by PRPS using Jasper Reports on 23 Sep 2022

L 17576 2007026 D S D PLATE, IDENTIFICATION-

RETRACT ACTUATOR, MLG

(-3)

S 98747 20A2581-H S AESO/ENGINEERING ORDER

L 17576 2007028 H S D BEARING, ROD END-RETRACT

ACTUATOR,MLG

S 98747 19A1480-H S D ENGINEERING ORDER/AESO

L 17576 2006023 B S D NUT FLANGED SNUBBING

S 98747 20A2583-H S D AESO/ENGINEERING ORDER

L 17576 2006029 C S D SLEEVE, SNUBBING- RETRACT

S 98747 20A2584-H S AESO/ENGINEERING ORDER

L 17576 2006030 C S D SPRING, COMPRESSION,

SNUBBING-RETRACT

ACTUATOR MLG

S 98747 20A2585-H S D AESO/ENGINEERING ORDER

L 17576 2006031 S D RETAINER SNUBBING RING

S 98747 20A2586-H S D AESO/ENGINEERING ORDER

L 17576 2006032 B S D RING, SNUBBING - RETRACT

ACTUATOR, MAIN LANDING

GE

S 98747 20A2587-H S D AESO/ENGINEERING ORDER

L 17576 2006220 D S D PISTON, ACTUATOR,

RETRACT-MLG, FORGING OF

S 98747 20A2589-H S AESO/ENGINEERING ORDER

L 17576 2006403 B S D PLATE, MARKING - MAIN AND

NOSE LANDING GEAR

S 98747 20A2590-H S D AESO/ENGINEERING ORDER

L 17576 1728-B S D LUBRICATOR

Page 2 of 3EDL Version 18Generated by PRPS using Jasper Reports on 23 Sep 2022

L 98747 201125010 S D WASHER LOCKING ROD ENG

L 17576 600RT21804242 O SEAL ASSEMBLY Fowers, Jennifer L 23 JUL 2021

AQUIRE FROM: GREENE TWEED & CO. INC.

KULPSVILLE PA

19443-0305

PHONE NUMBER 267-932-5241

CAGE: 5F573

GREENE TWEED PART NUMBER 7218FT-160-T IS AN ACCEPTABLE

ALTERNATIVE TO 600FT21804242.

L 17576 BSSR-8-2080-G3 S D SPERICAL BEARING

ASSEMBLY.

Fowers, Jennifer L 27 JUL 2021

MRB IN ACCORDANCE WITH DRAWING 201416605 PARAGRAPH 5.1.1

L 39661 MM1920 U S D APPLICATION OF DRY FILM

LUBRICANTS

L 17576 MM5743 AB S D SHRINK-FIT ASSEMBLIES AND

INSTALLATION OF BUSHINGS

L 17576 TM1051 E S D TEST PROCEDURES

L 17576 TM1113 B S D INSTALLATION OF

LUBRICATION FITTING DRIVE

TYPE

L 98747 200827953 A S D LABEL, UNIQUE

IDENTIFICATION (UID),

LANDING GEAR

L 98747 201416605 D S D LANDING GEAR

REQUIREMENTS DOCUMENT

STANDARD ENGINEERING TEXT

Fowers, Jennifer L 27 JUL 2021

RELEASE OF THIS DATA TO A FOREIGN OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE.

NOTE TO ALL SUPPLY CHAIN PERSONNEL: THE ENGINEERING NOTES ARE PROVIDED ON AIR FORCE DRAWING 201416605, CAGE CODE 98747, AND ADVANCED ENGINEERING SUPPLEMENTALORDER(S) (AESO'S). THE HILL AFB FORM 462, ENGINEERING DATA REQUIREMENTS (ATTACHMENT A /ENGINEERING INSTRUCTIONS) ARE NO LONGER UTILIZED FOR LANDING GEAR AND WILL NOT BE PROVIDED. ALL PREVIOUS LANDING GEAR VERSIONS OF THE HILL AFB FORM 462 FOR THIS NATIONAL STOCK NUMBER (NSN) HAVE BEEN SUPERSEDED AND WILL NOT BE

UTILIZED FOR MANUFACTURE OF THIS COMPONENT/ASSEMBLY.

Page 3 of 3EDL Version 18Generated by PRPS using Jasper Reports on 23 Sep 2022

Statement of Work March 2021

PRESERVATION, PACKAGING & MARKING REQUIREMENTS

The contractor shall develop, implement and maintain the preservation, packaging and packing of all items to be delivered under the terms of this contract. Packaging procedures will be established in accordance with AFMCI 24-201, specifically Paragraph 3.7 and MIL-STD-2073-1, Standard Practice for Military Packaging, Packaging requirements are identified in the AFMC Form 158, Packaging Requirements submitted by the responsible packaging specialist. All “markings and labeling” of shipments shall conform to MIL-STD-129, DoD Standard Practice, Military Marking for Shipment and Storage. The contractor shall affix a completed DD Form 1574, Serviceable Tag-Materiel or DD Form 1574-1, Serviceable Label- Materiel to each unit pack or intermediate container and prime outer container(s). The tag or label will indicate the condition(s) of the materiel and to identify the individual article or contents, bundle, container to which they are securely attached.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

(ISPM 15) REQUIREMENTS

The contractor shall use the wood packaging material regulation for international trade which describes Phytosanitary (including treatments) that have been approved for wood packaging material and provides for the approval of new or revised treatments. Use the latest revision of (ISPM 15), and the following statement complies with the United Nations-implemented restrictions on wood packaging material (WPM).

“This requirement is specifically concerned with invasive species such as pinewood nematode. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. The statement below cites the requirements in detail and covers lumber for building containers and pallets used for deliveries resulting in worldwide shipments (direct vendor deliveries, Air Logistics complex (ALC), Container Consolidation Points (CCP), Aerial Ports, Water Ports, or other DoD installations).

ELECTROSTATIC MATERIAL (When Applicable) The Contractor shall apply provisions of MIL-STD-2073-1, when identifying all solid-state devices and modules containing diodes, translators, integrated circuits and/or other microelectronic components sensitive to electrostatic forces. All such items shall be packaged IAW MIL-STD-2073-1 in conjunction with ANS/ESD S20.20, using electrostatic free barrier materials and shall clearly bear “Electrostatic Sensitive Device” labels IAW MIL-STD-129, Department of Defense Standard Practice Military Marking for Shipment and Storage.

PALLETIZED UNIT LOADS

The Contractor shall apply provisions and methods of MIL-STD-147, Palletized Unit Loads to contracts requiring the preparation and shipment of bonded palletized unit loads for DoD facilities when applicable.

SPECIALIZED SHIPPING CONTAINERS

The contractor shall apply provisions of MIL-STD-648, Department of Defense Design Criteria Standard, Specialized Shipping Containers. This standard establishes general design guidelines and associated tests for specialized shipping containers used by the Department of Defense. Definitive requirements for specific containers will be defined by the individual specification, acquisition, or task order. This standard is intended to be used as the basic reference document in all specifications and standards prescribing performance requirements to be applied to a specialized shipping container. Compliance with this intent is expected through normal application of the specification or standard preparation and revision processes.

Statement of Work (Cont)

HAZARDOUS MATERIALS (When Applicable) The contractor shall ensure Hazardous shipments comply with International Civil Aviation Organization (ICAO), U.S. Code of Federal Regulations (CFR) Title 49, International Air Transport Association (IATA) Dangerous Goods Regulation, International Maritime Dangerous Goods Code (IMDG, Annex 1), and AFMAN 24-604, Preparing Hazardous Materials for Military Air Shipments. Packaging shall meet “DOT specification or a United Nation (UN) specification ” manufactured in accordance with 49 CFR, Part 178 and the final packages assembled IAW 49 CFR, Parts 100-185 as applicable. A Competent Authority Approval (CAA) shall be acquired from the responsible Associate Administrator or other designated Department official to perform a function requiring prior consent under the Hazardous Material Regulation (HMR). Package(s) shall be marked IAW MIL-STD-129, DoD Standard Practice, Military Marking for Shipment and Storage.

The contractor shall affix a completed DD Form 1574, Serviceable Tag-Materiel or DD Form 1574-1, Serviceable Label- Materiel to each unit pack or intermediate container and prime outer container(s). The tag or label will indicate the condition(s) of the materiel and to identify the individual article or contents, bundle, container to which they are securely attached. If a symbol is used to represent the manufacturer or the approval agency certifying compliance with 49 CFR 178, subparts L and M, the symbol must be registered with the U.S. Department of Transportation. A copy of the Contractor’s Test Report and signed certification that the package configuration meets both CFR and UN requirements shall be made available to the procuring contract office, as required, prior to acceptance or shipment of any portion of the product IAW Contract Data Requirements List (CDRL DI-PACK-81059B) (Reference AFMC Form 158). Safety Data Sheets (SDS) are required for known hazardous items and applicable items shown in FED-STD-313, Tables I and II. The SDS shall have any applicable identification number, such as National Stock Number or Special Item Number. A copy of the SDS shall be mailed or e-mailed no later than five (5) days prior to contractual delivery of items:

FAR clause 52.223-3, Hazardous Material Identification and Material Safety Data

SPECIAL PACKAGING INSTRUCTIONS RETRIEVAL & EXCHANGE SYSTEM

(SPIRES)

Contractors may request the use of SPIRES website to view item packaging requirements or search for Special Packaging Instruction drawings via the following website: https://spires.wpafb.af.mil/

REUSABLE CONTAINERS

The contractor shall safeguard all received reusable shipping containers that meet the requirements of the AFMC Form 158 and are suitable for return shipment of serviceable assets. The contractor shall dispose of and replace unserviceable containers with new containers that meet requirements of the AFMC Form 158.

Contact the Product Support Manager and Administering Contracting Office (ACO) for disposition instructions and replacement when Long Life Reusable Container(s) are received in an unserviceable condition.

https://spires.wpafb.af.mil/

REPORTING DISCREPANCIES

The contractor shall use Web Supply Discrepancy Report (WebSDR) to submit/reply to a Supply Discrepancy Report (SDR), when improperly packed assets are received/shipped in other than the contracted packaging requirements (coded data or Special Packaging Instructions (SPI) drawings) from Department of Defense (DoD) components or contractor activities. The contractor shall request a WebSDR account via the following website: https://www.transactionservices.dla.mil/daashome/homepage.asp

(See Defense Logistics Management (DLM) 4000.25-M, Volume 2, Supply Standard and Procedures, Chapter 17, Supply Discrepancy Reporting) http://www.dla.mil/HQ/InformationOperations/DLMS/

Exceptions when no damage has occurred are as follows:

- Items packaged before the current SPIdate.

- An alternate pack may be used, provided the prime Air Force Sustainment Complex, Packaging Office at the Air Logistics Complex (ALC) approves and issues a waiver, deviation number, which would be annotated on the exterior container on the lower right hand portion of the identification side of thecontainer.

- In accordance with Technical Order (TO) 00-85B-3, How to Package Air Force Spares, the contractor may substitute the next larger size fast pack, of the type I or type II to ship transportation priorities 1 and 2 shipments as long as there is no decrease in any of the container dimensions without the requirement of a waiver deviation. TO 00- 85B-3, para 4.2 can be accessed via the website:

- https://www.tinker.af.mil/Portals/106/Documents/Technical%20Orders/AFD-082416-00-85B-3.pdf

ASSIST Documents for Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions The contractor shall use the ASSIST website to access specification, standards, data item descriptions documents listed in this contract solicitation:

FAR 52-211-2 Availability of Specifications, Standards, and Data Item Descriptions listed in the Acquisition Streamlining and Standardization Information System https://quicksearch.dla.mil/

AFSC

406 SCMS/GULAA

Attn:

DSN:

COMM:

E-mail:

https://www.transactionservices.dla.mil/daashome/homepage.asp http://www.dla.mil/HQ/InformationOperations/DLMS/ https://www.tinker.af.mil/Portals/106/Documents/Technical%20Orders/AFD-082416-00-85B-3.pdf https://quicksearch.dla.mil/%23/

APPLICABLE GOVERNMENT PACKAGING DOCUMENTS

NOTE: UTILIZE THE MOST RECENT REVISION

AFI 24-602V2_AFGM2018-01, Preparation and Movement of Air Force Cargo

AFMAN 24-604, Preparing Hazardous Materials for Military Air Shipments

DLMS 4000.25, Defense Logistics Management Systems, Volume 2, Change 10, Supply Standards and Procedures, Chapter 17, Supply Discrepancy Reporting

DOT Title 29, Occupational Safety and Health Administration, Labor

DOT Title 49, Code of Federal Regulations (49 CFR), Transportation

International Civil Aviation Organization (ICAO) Technical Instructions

International Air Transport Association (IATA) Dangerous Goods Regulation

International Maritime Dangerous Goods (IMDG) Code

ISPM 15, International Standard Phytosanitary Measure Note: Marking Requirements may be found in the American Lumber Standards Committee, Incorporated Wood Packaging Material Enforcement Regulations dated November 07, 2014 and ISPM 15.

MIL-STD-2073-1E, Change 4, Standard Practice, for Military Packaging

MIL-STD-129R, Change 1, Department of Defense Standard Practice Military Marking for Shipment and Storage

MIL-STD-648E, Department of Defense Design Criteria Standard, Specialized Shipping Containers

MIL-STD-147E, Change 1, Palletized Unit Loads

MIL-HDBK-773B, Electrostatic Discharge Protective Packaging

TO 00-85B-3, How to Package Air Force Spares

FED-STD-313E, Federal Standard: Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities

Statement of Work (Cont)

HAZARDOUS MATERIALS (When Applicable)

SPECIAL PACKAGING INSTRUCTIONS RETRIEVAL & EXCHANGE SYSTEM (SPIRES)

REUSABLE CONTAINERS

Statement of Work (Cont)

REPORTING DISCREPANCIES

Exceptions when no damage has occurred are as follows:

ASSIST Documents for Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions

AFSC

Statement of Work (Cont)

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 11 JULY 2022. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

16 LBS

ITEM WT.

2169 MOD

MARCH 87

DD

FORM

LEVEL B:

LEVEL A:

CLOSURE

IAW: ASTM D1974 2B6

IAW: ASTM D6880

COMPUTER GENERATED

SPI NO. F01-261-5177

CODE ID

98747

DESIGN FRAGILITY G

SPEC STYLE TYPE CL VRTY GR TR

AS SPECIFIED BELOW AND BILL OF MATERIALS

ILL.

NATIONAL STOCK NO.

PART OR DRAWING NO.

CURRENT

SPECIAL MARKINGS:

A) SPI NO. F01-261-5177

PRESERVATIVE: N/A

UNSERVICEABLE METHOD: 41

CLEANING & DRYING: IAW MIL-STD-2073

MILITARY PRESERVATION IAW MIL-STD-2073

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

MARKING IAW MIL-STD-129

QUP

ICQ

CNTR O.D.

ITEM DIM

CNTR I.D.

GROSS WT LBS

ITEM NOMENCLATURE

PACKING

LEVEL

GROSS CU FT

B

A

ASTM D5118

ASTM D6880 (MOD)

REV

DATE

ORIGINAL

CHK.

AUTH.

P.S.

SPECIAL PACKAGING INSTRUCTION

7 1/8

3 3/4

43 1/4

41 3/8

8 3/4

7 1/2

3 3/4

LENGTH WIDTH DEPTH

6 3/4

7 1/2

41 3/4

7 3/4

6 3/4

LEVEL A LEVEL B

1.971

1.280

SPI NO. (TPO)

SHEET 1 OF 4

K. KNIGHTON D. GIBSON W. MONSON J. BURLEIGH

1620-01-261-5177 LE

1620PL0498144

F01-261-5177

B

V3c

RSC

22193

REVISIONS

DESCRIPTION

LTR

DATE

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

SERVICEABLE METHOD: 41

REQD

P/N

QTY

SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

DESCRIPTION

NOMENCLATURE OR

SPECIFICATION

MATERIAL

A/R A/R 1 2 2 2 2

TAPE, PACKAGING WRAP/CUSHION BAG CUSHION, END CUSHION, SIDE CUSHION, TOP & BOTTOM TOP & BOTTOM (LVL A ONLY) (LVL A ONLY)

3 X AS REQUIRED AS REQUIRED AS REQUIRED 4 3/4 X 4 3/4 X 1 41 X 4 3/4 X 1 41 X 6 3/4 X 1 43 1/4 X 9 X 1/2

ASTM D5486 TYPE I OR V PPP-C-1797 TYPE I MIL-DTL-117 TYPE I, CL. E, STYLE 1 A-A-59135 CLASS 2, GRADE A A-A-59135 CLASS 2, GRADE A A-A-59135 CLASS 2, GRADE A A-A-55057 TYPE A

-7 -6 -5 -4 -3 -2 -1

2169C MOD

SHEET 2 OF 4

CAUTION NOTICES

NOTICE 1: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 2: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 3: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.

NOTICE 4: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND

STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND

THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE

ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND

STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

NOTES

1. USE EXTRA CUSHION, REF.-6, AS REQUIRED FOR SNUG FIT.

SHEET 3 OF 4

SHEET 4 OF 4

ITEM REFERENCE

Sheets and Views

012615177-SHEET 01

012615177-SHEET 02

012615177-SHEET 03

012615177-SHEET 04