DRAWING.pdf

A

ABCDEFGH

BCDEFGH

IJKLMNOP

IJKLMNOP

ESTIMATED WEIGHT

(KG UNLESS OTHERWISE SPECIFIED)

A1

TITLE

SIZE

SCALE: UNIT:

DWG NO.

SHEET

REV

COPYRIGHT @ 2014

Ingersoll Rand

ALL RIGHTS RESERVED

CAD GENERATED DRAWING,

NO MANUAL REVISIONS ALLOWED

DRAWING CONFORMS TO

ISO 1101

DO NOT SCALE DRAWING

PROPRIETARY NOTICE

4 0 2 , 8 1 6 1 5 , 8 1

UNLESS OTHERWISE SPECIFIED:

- REMOVE ALL BURRS AND SHARP CORNERS

- WELD SYMBOLS TO BE IN ACCORDANCE

WITH ISO 2553 OR ANSI/AWS A2.4

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET

INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS

GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION

AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE

AND AGREES THAT, EXCEPT AS AUTHORIZED IN WRITING BY

INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY

THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION

THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS

EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADE SECRET

INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO

RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL

COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.

WARNING: THE EXPORT OR REEXPORT OF THIS DRAWING OR A PRODUCT PRODUCED

BY THIS DRAWING IS SUBJECT TO U.S. EXPORT ADMINISTRATION REGULATIONS

AND OTHER APPLICABLE GOVERNMENT RESTRICTIONS OR REGULATIONS.

FIRST ANGLE PROJECTION

DRAWN DATE

DPK 13-FEB-2019

CHECKED DATE

AF 13-FEB-2019

APPROVED DATE

AF 13-FEB-2019

DRAWING TYPE

Detail Drawing

NOMENCLATURE

76451514 For Internal Use: 47625105001 |A S S E M|E .0|Jerome V an Lierde |11-Jun-20 02:47:51 P M |Open

SLH060SIP2C9M9

SLH060SIP2C9M9

0.0 kilogram 47625105001 E

0.25 NAVY-SUBSEA 1 OF 1

REVISIONS

APP'DDRAWNDATEDESCRIPTIONECNREVZONE

AFJVL03/03/2020DRAWING UPDATE1389965E

MATERIAL

Material PN:

STANDARD TOLERANCES

ALL DIMENSIONS ARE IN

MILLIMETERS

[ INCHES (IF SHOWN)]

UNLESS OTHERWISE SPECIFIED

TOLERANCES ON DIMENSIONS

TO BE IN ACCORDANCE

WITH ISO 2768 mH

Ingersoll-Rand Industrial Technologies

Standard feature include the following:

- All steel/cast iron construction

- Rugged and compact modular design

- Explosion proof - No downtime

- Overload protection device adjusted at factory during load tests

- Top and bottom limit switches (Quick down hydraulic valves)

- Automatic fail safe disc brake (no adjustment required)

- Couterbalance valve for dynamic control of the lowering speed

- Orbit type hydraulic motor

- Accepts up to 50 bar in return line

- Fully enclosed planetary gear box

- Corrosion resistant load chain

- Suitable for horizontal pulling applications

- Individually load tested before shipment

- Easy maintenance

- Designed for use up to 30m deep

- Offshore Painting System (QZ)

FEM classification:

- Driving mecanism classification 1Bm

Built in ISO 9001 certified factory

Technical data of hoist (at 40 C & Oil viscosity 46 cSt):

- Lifting capacity: 6 Ton

- Chain falls: 1

- Chain size: 16x45

- Maximum hoisting speed at rated load: 2.8 m/min (9.2 fpm)

- Maximum lowering speed at rated load: 3 m/min (9.8 fpm)

- Maximum hoisting and lowering speed at no load: 2.8 m/min (9.2 fpm)

- Nominal working pressure*: 120 bar (1740 psi)

- Recommended network pressure*: 140 bar (2030 psi)

- Nominal flow: 40L/min(10.6 gpm)

- Pressure port size (BSPP): 3/4"

- Return Port size (BSPP): 3/4"

- Hoist Weight with 9m of lift:219 kg(483 lbs)

- Chain weight per additional meter of lift:5.7 kg(12.5 lbs)

- Maximum Height of lift:52 m(170 ft)

- Minimum headroom:717 mm(28.2 in)

- Maximum Water Depth:30 meters (100 ft)

- FEM / ISO Mechanical classification:1 Bm / M3

- Coating system: Sandblasting and offshore 3 layers paint system according to ISO C5-M

* all performances are considering 5 bar maximum backpressure in the return line.

If your hydraulic power unit installation has over 5 bar backpressure, you must increase the network and working pressure of the same value.

The maximum back pressure the hoist can support is 50 bar in the return line.

APPROVED 16/Jun/2020 14:55:17 GMT