DLAD LOCAL and PROC Notes.docx

DLAD CLAUSES

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components. The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.

In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry Data Exchange Program (GIDEP), where feasible; and to provide immediate advance notice of production phase-out to DLA DMSMS at dscc.dmsms@dla.mil.

C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2020)

(1) By submitting a quotation or offer, the contractor, if it is not the manufacturer of the item, is confirming it currently has, or will obtain before delivery, and shall retain documented evidence (supply chain traceability documentation), as described in paragraph (2) of this procurement note, demonstrating the item is from the approved manufacturer and conforms to the technical requirements.

(2) At a minimum, the supply chain traceability documentation for the item shall include: basic item description, part number and/or national stock number, manufacturing source, manufacturing source’s Commercial and Government Entity (CAGE) code, and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to item(s) acceptance by the Government. The documentation should also include, if available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

(3) Contractors can find examples of acceptable supply chain traceability documentation at the Counterfeit Detection and Avoidance Program (CDAP) website (http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection-Avoidance- Program/). The contractor shall immediately make documentation available to the contracting officer upon request. The contracting officer determines the acceptability and sufficiency of documentation. The contractor shall retain supply chain traceability documentation for six years after final payment under this contract for audit and other valid government purposes. If the contractor fails to retain or provide the documentation, or the contracting officer finds the documentation to be unacceptable, the contracting officer may take corrective action, including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

C04 Unused Former Government Surplus Property (SEP 2021) To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [ ] No [ ] The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [ ] No The material conforms to the revision letter/number, if any is cited. Yes [ ] No [ ] Unknown If No, the revision does not affect form, fit, function, or interface. Yes No Unknown The material was manufactured by:

If yes, the offeror purchased the material from a Government selling agency or other source.

(3) The material has been altered or modified. Yes No If Yes, complete the following:

Name of the company that performed the alternation or modification:

[(Address): Complete description of the alterations or modifications.

(4) The material has been reconditioned. Yes No If Yes, complete the following:

(i) The price offered includes the cost of reconditioning /refurbishment. Yes No

(ii) Name of the company that reconditioned the material.

(iii) Description of any work done or to be done, including the components to be replaced and the applicable rebuild standard.

The material contains cure-dated components. Yes No If Yes, complete the following:

(i) The price includes replacement of cure-dated components. Yes No

(ii) Cure date:

(5) The material has data plates attached. Yes No If Yes, insert all information contained on the data plate.

(6) The offered material is in its original package. Yes No If yes, complete the following:

(7) The offeror has supplied this same material (National Stock Number) to the Government before. Yes No If Yes, complete the following:

(i) The material being offered is from the same original Government contract number as that provided previously. Yes No

(ii) State below the Government Agency and contract number under which the material was previously provided:

Agency Contract Number

(8) The material is manufactured in accordance with a specification or drawing. Yes No If Yes, complete the following:

(i) The specification/drawing is in the possession of the offeror. Yes No

(ii) The offeror has stated the applicable information below: Yes No Specification/Drawing Number Revision (if any) Date

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes No If Yes, complete the following:

(i) Material has been re-preserved. Yes No

(ii) Material has been repackaged. Yes No

(iii) Percentage of material that has been inspected is %; and/or

(iv) Number of items inspected is

(v) A written report was prepared. Yes No The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror will forward one of the following, within 24 hours of request by the contracting officer, to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

This procurement note only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer’s overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

C14 Correction of Nonconforming Packaging or Marking (MAY 2020)

(1) The Government may correct nonconforming packaging or marking for receipts of DLA- owned materiel if the estimated costs of correction are $1,000 or less. The contracting officer will advise the contractor of the discrepancy and that the Government has corrected the packaging or marking. The contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government’s costs to correct the deficiencies. Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

(2) If the estimated costs of correction for receipts of DLA-owned materiel are more than $1,000, the contracting officer will advise the contractor of the discrepancy and have the materiel returned to the contractor for correction/resubmittal; or, if there are urgent requirements, have the Government remediate the discrepancy at the contractor’s expense. If the Government remediates the discrepancy, the contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government’s costs to correct the deficiencies. Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

C20 Vendor Shipment Module (VSM) (SEP 2021)

1. The DLA Vendor Shipment Module (VSM) is a web-based system available to DLA contractors for obtaining current shipping addresses, two-dimensional bar coded shipping labels in accordance with MIL-STD-129, bills of lading, packing lists, and other shipping documentation. Contractors using VSM do not need to contact the transportation office prior to shipping items. Contractors can use VSM to print labels for f.o.b. destination contracts and to print labels and arrange for shipping for f.o.b. origin contracts.

1. To obtain information for contracts administered by DLA or to register as a VSM user, the contractor shall contact the DLA VSM Helpdesk at (800) 456-5507 or via email to delivery@dla.mil.

1. Before contacting the Government to advise that material is ready to ship, the contractor shall complete its VSM profile, to include regular business hours and observed holidays. The Government may request reimbursement for occurrences when the Government sends carrier equipment but is unable to pick-up a shipment because the material was unavailable or the contractor facility was closed.

1. To obtain information for contracts administered by DCMA, the contractor shall contact the DCMA VSM Helpdesk at (314) 331-5573 or vsm.shipments@dcma.mil.

E05 Product Verification Testing (MAY 2020)

(1) Product verification testing (PVT) under this procurement note will only apply when the contracting officer specifically invokes it in writing. The contracting officer may invoke PVT at or after contract award. If the contracting officer invokes PVT at contract award, the contract will explicitly state this testing requirement. If the contracting officer invokes PVT after contract award, the contracting officer shall notify the contractor and the cognizant DCMA ACO. The Government will perform PVT testing at a Government-designated testing laboratory.

The contractor shall not ship or deliver any material until it receives notification of the acceptable PVT results, unless the contracting officer directs it to do so in writing The Government will provide the PVT

(1) results to the contractor within 20 business days after receipt at the Government testing facility, unless the Government specifies otherwise in writing.

(2) The contractor shall provide and maintain an inspection system acceptable to the Governmentin accordance with FAR Clause 52.246-2 or 52.246-3; and maintain and make available all records evidencing those details if requested by the Government. When the Government finds evidence of risk associated with the contractor’s sampling process, the Government may witness and evaluate the contractors sampling process. The contractor shall randomly select samples from the production lot(s), unless the contracting officer specifies otherwise in writing. The contractor shall ship the selected PVT samples with a copy of the system of record receiving report (i.e., WAWF, DD Form 250, or commercial shipping document) and the contractor’s signed DD Form 1222. The contractor shall prepare the shipping container(s) by marking the external packages in bold letters, “Product Verification Test Samples – Do Not Post to Stock," Contract Number [contractor insert] and Lot/Item Number [contractor insert]” adjacent to the MIL-STD-129 (latest revision) identification markings. The contractor shall use a hard copy of the system of record receiving report as a packing list, in accordance with DFARS Appendix F. The contractor shall mark the exterior of the shipping container in accordance with MIL-STD- 129 (latest revision), paragraph 5.11. The contractor shall send samples by traceable means (e.g.,certified or registered mail, United Parcel Service, Federal Express). The contractor shall includethe following in the interior package:

(a) Hard copies of the contract;

(b) Material certifications/process operation sheets; and

(c) Drawings used to manufacture the units and return shipping information.

(3) The Government will return samples that pass testing and are not destroyed during evaluation to the contractor at the Government's expense for the contractor to include as part of the total contract quantity to be delivered under the contract. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. If the Government does not return approved samples that pass testing to the contractor, the Government will consider those samples as part of the contract quantity for payment and delivery.

(4) If samples fail testing, the Government may reject the entire contract lot from which the contractor took the samples. The Government may, at its discretion, retain samples that fail testing without obligation to the contractor.

H10 Awardee Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020) Awardee has confirmed it will not require access to DLA controlled technical data or information for contract performance, and it will provide items that conform to the current revision of applicable technical data.

L01 Electronic Award Transmission (JUN 2020) DLA provides notice of awards by either—

(1) Electronic email containing a link to the electronic copy of the Department of Defense (DD) Form 1155, Order for Supplies or Services, on the DLA Internet Bid Board System (DIBBS); or

(2) Electronic Data Interchange (EDI) 850 utilizing American National Standards Institute (ANSI) X12 Standards through a value added network (VAN) approved by DLA Transaction Services.

Offerors/contractors can obtain information regarding EDI, ANSI X12 transactions, and VANs approved by DLA Transaction Services at Defense Automatic Addressing System (DAAS) Value Added Network List (https://www.transactionservices.dla.mil/daashome/edi-vanlist- dla.asp). Offerors should direct questions concerning electronic ordering to the appropriate procuring organization point of contact below:

DLA Land and Maritime, Helpdesk.EBS.L&M.LTCs@dla.mil DLA Troop Support, dlaedigroup@dla.mil

L06 Agency Protests (DEC 2016) Interested parties may file an agency level protest with the contracting officer or may request an independent review by the chief of the contracting office (CCO). Independent review by the CCO is an alternative to consideration by the contracting officer and is not available as an appellate review of a contracting officer decision on a protest previously filed with the contracting officer. Absent a clear indication of the intent to file an agency level protest with the CCO for independent review, protests will be presumed to be protests to the contracting officer.

L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2020)

(1) The Government will use the Supplier Performance Risk System (SPRS) (https://www.sprs.csd.disa.mil/) (formerly Past Performance Information Retrieval System – Statistical Reporting (PPIRS-SR)) to evaluate suppliers’ past performance.

(2) SPRS collects quality and delivery data on previously awarded contracts and orders from existing Department of Defense reporting systems to classify each supplier’s performance history by Federal Supply Class (FSC) and product or service code (PSC). The SPRS application provides the contracting officer quantifiable past performance information regarding a supplier's quality and delivery performance for the FSC and PSC of the supplies the Government is purchasing.

(3) The contracting officer will use the quality and delivery classifications identified for a supplier in SPRS to evaluate a supplier’s past performance in conjunction with the supplier’s references (if requested). The Government will use this past performance information in accordance with the basis for award stated in the solicitation.

(4) SPRS generates classifications daily for each contractor. The SPRS Software User's Guide for Awardees/Contractors (https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf) and the SPRS Government User Guide (https://www.sprs.csd.disa.mil/pdf/SPRS_Government.pdf) provide instructions for accessing SPRS classifications. Contractors have access to SPRS for their own classifications only. Suppliers are encouraged to review their own classifications; the SPRS reporting procedures and classification methodology detailed in the SPRS Software User's Guide for Awardees/Contractors (https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf); and the SPRS Evaluation Criteria (https://www.sprs.csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf). The SPRS Software User's Guide for Awardees/Contractors (https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf) provides the method to challenge a rating generated by SPRS.

L31 Additive Manufacturing (JUN 2018)

(1) Additive manufacturing (AM) is a process of joining materials to make objects from three- dimensional (3D) model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies, which remove material from areas where it is not desired, or other traditional manufacturing technologies, such as molding or stamping.

(2) Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the Engineering Support Activity (ESA) for acceptability for future procurements of the same items.

(3) If an item produced using AM is presented to the Government for inspection and acceptance that was not authorized in the solicitation/contract, the Government may reject the item as nonconforming.

M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)

(1) All offers for unused former Government surplus property shall have a $200 evaluation factor.

(2) All offers for CSI require evaluation by the ESA(s). An evaluation factor of $600 shall be applied for coordination with each ESA.

(3) If the contracting officer cannot determine acceptability and coordinates with the ESA(s) on other than CSI, an evaluation factor of $600 shall be applied for each ESA.

52.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution

(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.

(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the Contractor (see Federal Acquisition Regulation (FAR) clause 52.233-1), or, for the Agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal. Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate.

(c) The offeror should check here to opt out of this clause:

[ ] Alternate wording may be negotiated with the Contracting Officer.

(End of Clause)

DLA PROC NOTES

YM3 A1: Additional Information

INVOICING AND PAYMENT INSTRUCTIONS:

Contracting Officer’s point of contact is:

Thomas Apple, Code KME.TA Email: Thomas.AppleJr@dla.mil

Submit invoices via Wide Area Workflow (https://wawf.eb.mil) in accordance with the instructions contained in FAR 252.232-7006 (Wide Area Workflow Payment Instructions).

Calls inquiring on payments can be made to DFAS Columbus Customer Service at 800-756-4571.

WAWF invoice/reject inquiries can be made to ask DFAS by email at: https://www.dfas.mil/dfas/AskDFAS/

The DFAS website is https://www.dfas.mil/dfas/AskDFAS/DoDAAC.html

YM3 C500: Mercury Control (Supplies)

Mercury or mercury containing compounds shall not be intentionally added or come in direct contact with hardware or supplies furnished under this contract.

YM3 C528: Specification Changes

No changes to specification or other contract technical requirements are allowed without Contracting Officer approval.

YM3 D2: Marking of Shipments

The contractor shall mark all shipments of military packaged items in accordance with MIL-STD-129 (Latest Revision) “Marking for Shipment and Storage” and all commercially packaged items in accordance with ASTM-D-3951 (Latest Revision) “Standard Practice for Commercial Packaging”.

ALL EXTERIOR CONTAINERS/PACKS SHALL AS A MINIMUM BE MARKED AS FOLLOWS:

1. Applicable National Stock Number (NSN), Federal Stock Number (FSN), Local Stock Number (LSN), or Part Number, when neither NSN nor FSN or LSN are available.

2. Quantity

3. QA Designator: 4

4. Government Contract or Purchase Order Number (incl. Delivery Order No)

5. From: (Contractor’s Name and Address)

6. To: (Shipment Address)

7. Markings may be applied by any means, which provide legibility

8. Additional markings required are stated below: None

YM3 D4: Preparation for Delivery (Commercially Packaged Items)

Preservation, packaging and packing shall be in accordance with ASTM Designation D-3951(Latest Revision), “Standard Practice for Commercial Packaging

YM3 D8: Prohibited Packing Materials

The use of asbestos or excelsior is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use.

YM3 E2: Inspection and Acceptance (Destination)

Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity. Receiving activity shall execute acceptance certificate on the applicable inspection and receiving report form: DD Form 1155, Standard Form 44, DD form 250, or the Wide Area Workflow (WAWF) Receipt and Acceptance Receiving Report. The executed payment copy shall be forwarded to the paying office within four (4) workdays thereafter.

YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard

Consign Parcel Post shipments to Portsmouth, NH 03801.

For access to the Portsmouth Naval Shipyard (PNS), contact PNS Security Pass Office at 207-438-2235/2614.

MARK SHIPPING DOCUMENTS: “Notify Receiving Officer, Portsmouth Naval Shipyard prior to arrival for delivery instructions. Telephone: 207-438-5521/5206”.

NOTICE: CARRIER’S DRIVERS ENTERING PORTSMOUTH NAVAL SHIPYARD MUST BE UNITED STATES CITIZENS BY BIRTH OR MUST CARRY EVIDENCE OF NATURALIZATION.

Except by special arrangement, shipments will be received only between the hours of 7:00 AM and 2:30 PM local time, Monday through Friday (Federal Holidays excepted).

YM3 M8: Single Award for All Items

Due to the interrelationship of the items involved, the right is reserved to make a single award to the responsive offeror whose total proposal on all items is low.