21._Attachment_B_-_Guernsey_Transformer_Replacement_Drawings.pdf

8 June 2015

Attachment B

Guernsey Rural Substation Transformer Replacement Project Drawings

DE-SOL-0008513

P

PR

G

TRA

ROJ

GUER

ANSF

DES

JE

RNSE

FORM

SCRIP

CT

EY R

MER

WY

SE

PTION

T D

URA

KY1

YOM

CTIO

N/SPE

DRA

AL SU

A RE

MING

ON C

ECIF

AW

UBST

EPLA

ICAT

WIN

TATIO

ACEM

IONS

NGS

ON

MENT

S

S

T

Spec. No. 842

GUERNSEY RURAL SUBSTATION

TRANSFORMER KY1A REPLACEMENT

PROJECT DRAWINGS

A. GENERAL:

CONSTRUCTION STANDARD DRAWINGS: A complete set of standard drawings are available at http://www.wapa.gov/business/buys.htm. Construction drawings are the specification drawings and any additional drawings required for use in construction. The construction drawings will be issued after contract award and may include amendment changes and other details, which make the drawings suitable to use for construction purposes.

PROJECT DRAWINGS: Project drawings included herein are reduced reproductions and are not to scale. Two complete sets of Full-Size drawings will be provided by Western to the Contractor at the pre-construction meeting.

One full-size set is intended for use marking as-built changes. Some project drawings show details of fabrication and other information not a part of the work. Disregard information and details, which are not applicable.

STANDARD DRAWINGS: Where details shown on standard drawings included herein differ from project drawings or text, the details of project drawings or text shall govern.

INFORMATIONAL DRAWINGS: Some project drawings have the words “FOR INFORMATION ONLY” appearing above the title block. These drawings show some information, which may be required for bidding purposes.

These drawings do not show items to be furnished or work to be performed.

EXISTING INSTALLATION DRAWINGS: Some project drawings have the words “EXISTING INSTALLATION” appearing above the title block. These drawings show the existing installations prior to modifications and may show some new work to be performed.

REFERENCE DRAWINGS: Reference drawings referred to on project drawings and not included herein, are not necessary for bidding purposes.

CONTRACTOR'S RESPONSIBILITY: Check all drawings and advise Western of any errors or omissions.

B. LIST OF DRAWINGS:

LOCATION MAPS:

1. GW 0015 Rev. A – Location and Vicinity Map

2. STG 0016 Rev. B – Location and Vicinity Map

ELECTRICAL:

3. GW 0001 Rev. C EI – Switching Diagram (Existing Installation)

4. GW 0001 Rev. D – Switching Diagram

5. GW 1010 Rev. A EI – Electrical Installation Plan and Section (Existing Installation)

6. GW 1010 Rev. B – Arrangement Plan

7. GW 1110 – 69KV & 115KV Area Sections A-A, C-C & D-D

8. GW 1500 Rev. A EI – Grounding Plan – Location Plan (Existing Installation)

9. GW 1500 Rev. B – Grounding and Buried Cable Plan

10. GW 3001 Rev. A FIO – 16’ x 20’ Control House Plans – Elevations – Details (For Information Only)

11. GW 4004 FIO – Control House – Floor Plan & Section (For Information Only)

12. GW 6008 Rev. C EI – AC Distribution Panel Wiring Diagram (Existing Installation)

13. GW 6008 Rev. D – AC Distribution Panel Wiring Diagram

14. GW T610 – Control Cable List

SUBSTATION FOUNDATIONS:

15. GW 2001 Rev.A EI – Foundations Outline and Reinforcement (Existing Installation)

16. GW 2001 Rev.B – Foundations Outline and Reinforcement

17. GW 2003 Rev.A EI – Concrete Foundations Miscellaneous Metalwork (Existing Installation)

18. GW 2003 Rev.B – Concrete Foundations Miscellaneous Metalwork

19. GW 2200 EI – Foundation Plan (Existing Installation)

20. GW 2200 Rev.A – Foundation Plan

21. GW 2300 – Foundations Outline and Reinforcement

STEEL PLATFORMS:

22. GW 2928 – Equipment Platform Steel Design and Details

gw_t610a