Data Requirements - SPMYM324Q4033.pdf
PDF 5 MB Posted
- Attached to
- Hardware Federal contract opportunity
- Solicitation number
- SPMYM325Q4033
About this file
This document is a Contract Data Requirements List (CDRL) for a federal contract (SPMYM324Q4033) with the Defense Logistics Agency Land and Maritime, focusing on hardware specifications for special socket flat countersunk head cap screws.
The CDRL outlines two primary data items: A001 (Certification of Compliance) and A002 (Chemical & Mechanical Certification Data/Report). The document requires contractors to submit detailed technical certifications, including quantitative test results for chemical and mechanical properties of fasteners. Specific requirements include evidence of testing the correct number of specimens, with new untested fasteners required for wedge tensile and yield strength testing. The submission is a one-time delivery to be made with the material, with the first submission date set for 02/27/2025 and approval date of 03/03/2025. The certification must comply with specified marking and industrial material control requirements, and each data item must be submitted under a separate shipment number.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFQ-SPMYM325Q4033 Hardware 43614001R.docx | DOCX document | |
| FAR-DLAD-Local Notes and Clauses 4033.docx | DOCX document | |
| Combined Synopsis Solicitation Hardware SPMYM325Q4033.docx | DOCX document | |
| Security Agreement For Protection of NNPI 4033.docx | DOCX document | |
| RFQ-SPMYM325Q4033 Hardware 43614001.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2M-0780-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
A TDP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
SPECIAL SOCKET FLAT 50584061
COUNTERSUNK HEAD CAP SCREW
ANGLE SLF LKG
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C.2 CODE245
7. DD250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION a. ADDRESSEE b. COPIES
DD
REQUIRED One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
N/A
SUBMISSION 133.2 0 1 0
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H.DATE I. APPROVED BY 245.2 J. DATE
02/27/2025 3/3/2025
JOHNATHEN FARRINGTON Ext: 3496 X 03/03/2025 245.2M Jason Laflamme
Signed by: LAFLAMME.JASO N.R.1255776556
| 1 |
| 1a |
| 1b |
| 2 |
| 2a |
| 2b |
| 2c |
| 3 |
| 3a |
| 4 |
| 4a |
| 5 |
| 6 |
| 6a |
| 6b |
| 6c |
| 7 |
| 7a |
| 7b |
| 7c |
File details come from the government source that posted it. Updated .