Consolidated RFIs Bldg 104 Hangar Door.docx
DOCX document 16 KB Posted
- Attached to
- Bldg. 104 Hangar Door Federal contract opportunity
- Solicitation number
- W50S9320B5014
- Issued by
- Department of the Army National Guard
About this file
This document contains responses to industry questions regarding solicitation number W50S9320B5014 for the repair of Building 104's hangar door. The solicitation seeks to replace the hangar door and install new galvanized steel or aluminum bollards. Questions addressed include confirmation that Standard Form 1442 is required, provision of structural plans for the building, requirements for cranes and lifting equipment to notify the FAA before lifting, allowance for equipment to cross into the runway clear zone as needed, applicable building codes that new doors must meet regarding wind speed, and an opportunity for follow up questions on the structural plans.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| OF 1419A.pdf | ||
| OF 1419 ABSTRACT (2).pdf | ||
| BLDG 104 Floor Plan.pdf | ||
| Solicitation W50S9320B5014.pdf | ||
| BLDG 104 Structural 2.pdf | ||
| BLDG 104 Structural.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Repair Building 104, Hangar Door Government Responses to Industry Questions
1. Is the standard Bid Form?
· Standard Form 1442
2. Can you provide the structural plans, as built and any other plans you have for the Hangar?
· Provided
3. Will cranes and any other lifting equipment need FAA approval and certification?
· FAA notification, via airfield manager before lifting the crane boom is required.
4. Will the contractor be allowed to cross past the red line in the runway for equipment placement?
· Clear zone will be established as needed
5. What miles per hour does the new rolling door need to meet?
· Applicable building codes, federal and state.
6. What material does the new bollards need to be? (stainless steel, steel, aluminum).
· Galvanized Steel or aluminum concrete filled
7. Will the louvers be replaced or repair?
· Replaced
8. Will there be an opportunity to ask questions regarding the structural plans after they are posted?
· No
File details come from the government source that posted it. Updated .