Composite Vertical Bandsaw Item Description.pdf
PDF 143 KB Posted
- Attached to
- Composite Vertical Bandsaw Federal contract opportunity
- Solicitation number
- FA8125-24-Q-0024
About this file
This memorandum provides an item description for a composite vertical bandsaw solicitation. The 76th Aircraft Maintenance Group and 568th Aircraft Maintenance Squadron at Tinker Air Force Base are seeking to purchase one DoALL Model 2013-V3 composite vertical bandsaw or equal. The required specifications include a 208V/30A/3-phase power requirement, variable cutting speeds from a minimum of surface feet per minute to a maximum of 5,000 SFPM, a throat capacity of at least 20 inches, a cutting height capacity of 12-14 inches, a blade width of 1/8-1 inch, a table height from the floor of 38-46 inches, a footprint maximum of 72 inches by 48 inches by 84 inches, a table tilt maximum of at least 10 degrees positive and at least 45 degrees negative, a table size minimum of 14 inches by 14 inches, and inclusion of a standard miter gauge, blade guard and tension control device, work light, indicator for blade speeds in feet per minute, emergency stop button, blade start button, blade stop button, vacuum for dust removal, and a compatible 60-80 grit continuous diamond edge or 70-100 grit continuous Remington tungsten carbide band saw blade. The bandsaw must be delivered fully assembled with an operator's manual.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - FA812524Q0024.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
29 December 2023
MEMORANDUM FOR RECORD
SUBJECT: Item Description, A23-007 KC-46 Composite Vertical Bandsaw
1. The 76 AMXG/568 AMXS is requesting utilization of funds for the purchase of a vertical bandsaw.
2. The requested equipment item descriptions/specifications are Brand Name or equal to a DoALL Model 2013-V3 bandsaw. The requirements to be considered equal are outlined below.
a. Item Number 1 – One (1) DoALL Brand Model 2013-V3 Composite Vertical Bandsaw
1) Shall be a commercial off the shelf (COTS) item.
2) Shall have a maximum power requirement of 208V/30A/3-phase.
3) Shall have variable cutting speeds capable of a minimum of Surface Feet Per Minute
(SFPM) to a maximum of at least 5,000 SFPM and controls.
4) Throat capacity: at least 20"
5) Cutting Height Capacity: 12”-14”
6) Blade width: 1/8"-1"
7) Table Height from Floor: 38"-46”
8) Footprint maximum: 72” L x 48” W x 84” H
9) Table Tilt (deg.) maximum: At least 10 positive and at least 45 negative.
10) Table size minimum: 14” x 14”
11) Shall include standard miter gauge.
12) Shall include Blade Guard and Tension control device IAW OSHA 1910.213
13) Shall include Work Light
14) Shall include indicator for blade speeds in feet per minute.
15) Shall include Emergency Stop Button, Blade Start Button, and Blade Stop Button
16) Shall include Vacuum for removal of dust.
17) Shall include compatible 60-80 grit Continuous Diamond Edge, or 70-100 grit
Continuous Remington Tungsten Carbide Band Saw Blade
18) Shall deliver to Tinker AFB fully assembled with operator’s manual.
File details come from the government source that posted it. Updated .