Combined_Synopsis_Solicitation N3220522Q2198 final.pdf

MILITARY SEALIFT COMMAND

N10 - CONTRACTS AND BUSINESS MANAGEMENT DIRECTORATE

COMBINED SYNOPSIS/SOLICITATION TEMPLATE

Military Sealift Command Combined Synopsis and Solicitation Notice Information

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

2. Solicitation number is N3220522Q2198 and is being issued as a Request for Quotes (RFQ).

3. The solicitation document and incorporated provisions and clauses are those in effect through:

a. Federal Acquisition Circular (FAC) 2022-06, effective 05/26/2022, located on https://www.acquisition.gov/browse/index/far

b. DFARS Publication Notice 20220623, effective 06/23/2022 located at https://www.acq.osd.mil/dpap/dars/dfarspgi/current/

4. The associated NAICS code is 811310 and the associated PSC/FSC code is J039 for this procurement: NOTE:

A Class Waiver is not applicable to a procurement unless the NAICS code, PSC/FSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured.

is not being set-aside for small businesses.

is being set-aside for small business

5. The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options:

SERVICES

CLIN DESCRIPTION QUANTITY UNIT OF

MEASURE

0001 Servicing HYSTER forklifts in accordance with the statement of work below. The service is for Materials Handling Equipment (MHE) service and support to include repairs, services, and/or brand name OEM materials, and certification for MSC Building LP-26 and surrounding satellites Service will include all labor travel and materials

1 Activity Unit

6. It is anticipated one firm-fixed price purchase order will be issued in response to this RFQ. No commercial financing.

Subject: MATERIAL HANDLING EQUIPMENT (MHE) RECERTIFICATION SERVICE REQUEST IN

SUPPORT OF MSCHQ NORFOLK SHORE ASSETS

Reference: (a). NAVSEA SW0-23-AH-WHM-10 Eight Revision, Handling Ammunition and Explosives with industrial Material Handling Equipment (MHE) (b). NAVSUP Publication 538 Sixth Revision, Management of Material Handling Equipment (MHE) and Shipboard Mobile Support Equipment (SMSE) https://www.acquisition.gov/browse/index/far https://www.acq.osd.mil/dpap/dars/dfarspgi/current/

Attachments: (1). CDRL A0001 – Final Inspection Condition Report (2). CDRL A0002 – Fork Maintenance Report (3). CDRL A0003 – MHE Safety certification (4). CDRL A0004 – Work Order

1. Statement of Work (SOW): The following work items shall be accomplished by the selected service provider (contractor) in conjunction with this repair and maintenance requirement. The Government intends to award a Fixed Price Contract to the selected service provider:

a. Services to MHE identified in Table 1 below shall be performed ashore at MSC LP-26 Building and surrounding satellite sites. The Contractor’s quote shall specify the proposed location of the service and provide a summary of the proposed process for training, maintenance, repairs, and safety recertification.

b. Contractor shall perform all related inspections, of MHE / Battery Chargers identified in Table 1 in accordance with the requirements set forth in references (a) and (b), attachments 1 thru 4 and appropriate vehicle technical manuals.

c. SCOPE OF DIESEL FORKLIFT REPAIR WORK INCLUDES

1) PERFORM DIAGNOSTICS

Perform diagnostic service utilizing dashboard display, and – when required - Hyster approved and authorized Off-Board Laptop Diagnostic Troubleshooting Software, hardware, and diagnostic procedures.

Make sure speed is set at 5MPH

2) PERFORM VISUAL INSPECTION

Perform a complete inspection of the vehicle to include, but not be limited to, the following:

-Fluid Leaks -Carriage, including Rollers and Slider Blocks -Forks and Locks -Mast Chains, Retainers, and Anchors -Tire Condition -Steering Components -Overhead Guard -Improper Modifications -Seat Condition and Belts -Attachments, including Towing Devices

3) PERFORM OPERATIONAL INSPECTION

Perform a complete operational inspection of the forklift to include, but not be limited to, the following:

-Safety Devices -Neutral Starting Switch -Instruments/Horn/Lights -Brakes, Pedals, and Linkages

-Forward and Reverse Vehicle Operation -Parking Brake -Inching Control -Shift Levers -Steering -Exhaust Smoke -Mast Operation -Tilt Cylinder Operation -All Attachments -Backup Alarms

4) CLEAN VEHICLE AND COMPONENTS

Perform all cleaning requirements for the forklift and all its components to include, but not be limited to, the following:

-All Painted Areas -Radiator and Engine Compartment -Steer and Drive Axle -Mast -Under Floor Plate -Control Panel Area -Operator Area -Battery Tray

5) INSPECT ELECTRICAL SYSTEMS

Perform a complete inspection of the forklift’s electrical systems to include, but not be limited to, the following:

-Panel Power Connections -Check Seat Switch -Check Wire Connections and Condition -Check Distributor Cap and Rotor (if equipped) -Clean Battery Cable and Connections -Other Electrical Components, as Installed -Perform Repairs, as required

6) INSPECT HYDRAULIC SYSTEMS

Perform a complete inspection of the forklift’s hydraulic systems to include, but not be limited to, the following:

-All Hydraulic Lines, Hoses, and Fittings -Mast and Hose Reel -Lift, Tilt, and Shift Cylinders -Hydraulic Tank and Breather -Hydraulic Pumps -Attachment Links -Attachment Cylinders -Control Valve Operation and Leaks -Other Hydraulic Systems, as installed

7) LUBRICATE VEHICLE

Perform a complete lubrication of the forklift to include, but not be limited to, the following:

-Clutch Pedal -Accelerator Pedal -Drive Line U-Joints -Steer Axle -Steering Mechanisms -Mast, Chains, Rollers, Carriage Attachments -Brakes and Parking Brake Linkages -Accelerator Pedal -Direction Pedal -Lift and Tilt Control Hinges -Other Lubrication Points, as installed

8) INSPECT FUEL SYSTEM

Perform a complete inspection of the forklift’s full system to include, but not be limited to, the following:

-Check for Leaks -Check Fuel Lock-Off Regulators and Drain -Clean Water Trap -Perform Repairs, as Required

9) PERFORM ADDITIONAL MAINTENANCE ACTIONS

Perform any additional maintenance actions for the forklift to include, but not be limited to, the following:

-Verify Stencils/Markings Per NAVSUP P-538 and Re-Stencil/Re-Mark as needed, marking should include SWL both sides, VW both sides (and in view of operator on mast assembly), all operator controls, Manufacture name plate, Accredited laboratory UL, MHE safety Certification and EE on three sides -Check for Error Codes and Perform Non-Major Repairs, as required, to Clear Code -Check Mast Mounting Trunnions and Re-Torque Bolts, as Needed -Repack Leaking Lift, Tilt and Shift Cylinders -Adjust Load Chains and Cylinder Rods -Complete Electrical Tune-up (plus wires, rotors, etc, as equipped) -Check/Adjust Belts Condition and Tension; Replace as Required -Check Engine Compression -Check and Adjust Ignition Timing (as equipped) -Check and Adjust High and Low Engine RPMs -Adjust Engine Valves and Replace Valve Cover Gasket (as equipped) -Clean & Check PCV Valve (as Equipped); Replace as Needed -Check/Clean Induction System -Clean Filter Canister, Pre Cleaner -Check Radiator Hoses; Replace as Required -Change Air Cleaner -Change Final Fuel Filter (as equipped) Date filter -Change Engine Oil and Filter Date filter -Change Transmission Oil and Filter Date filter -Change Hydraulic Oil and Filters

-Change All Differential, Speed Reducer, and Final Drive Lubricants -Drain, Flush, and Change Coolant -Adjust Hydraulic Pressure, as required -Inspect lights, Backup Alarm, and Associated Wiring; Repair/Replace, as required -Remove Steer and Drive (Load) Wheels; inspect and Repack all four (4) Bearings -Check Brakes, Wheel Cylinders, and Associated Hardware; Adjust/Repair as required -Re-Torque Drive and Steer Wheel Nuts -Evacuate Brake System; Replace Fluid with DOT 3 Brake Fluid, or Per Tech Manual -Adjust Parking Brake and Linkage; Repair as required -Adjust Steering Linkage; Repair as required -Raise Rear of Vehicle and Manually Test Rear Brake Operation (with brake pedal pressed).

-Re-Adjust all Brakes, as required -Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques.

-Submit Condition Found Report (CFR) and Quote for Required Major Repairs

d. SCOPE OF ELECTRIC FORKLIFT REPAIR WORK INCLUDES

1) PERFORM DIAGNOSTICS

Perform diagnostic service utilizing dashboard display, and – when required - Hyster approved and authorized Off-Board Laptop Diagnostic Troubleshooting Software, hardware, and diagnostic procedures.

Make sure speed is set at 5MPH

2) PERFORM VISUAL INSPECTION

Perform a complete inspection of the vehicle to include, but not be limited to, the following:

-Fluid Leaks -Carriage, including Rollers and Slider Blocks -Forks and Locks -Mast Chains, Retainers, and Anchors -Tire Condition -Steering Components -Overhead Guard -Improper Modifications -Seat Condition and Belts -Attachments, including Towing Devices

3) PERFORM OPERATIONAL INSPECTION

Perform a complete operational inspection of the forklift to include, but not be limited to, the following:

-Safety Devices -Neutral Starting Switch -Instruments/Horn/Lights -Brakes, Pedals, and Linkages -Forward and Reverse Vehicle Operations -Parking Brake, -Shift Levers -Steering -Mast Operations -Lift, Tilt, and Shift Controls

-All Attachments -Backup Alarms

4) CLEAN VEHICLE AND COMPONENTS

Perform all cleaning requirements for the forklift and all its components to include, but not be limited to, the following:

-All Painted Areas -Steer and Drive Axle -Mast -Under Floor Plate -Control Panel Area -Operator Area -Battery Compartment and Tray -Motors and Pumps

5) INSPECT ELECTRICAL SYSTEMS

Perform a complete inspection of the forklift’s electrical systems to include, but not be limited to, the following:

-Panel Power Connections -Check Contactor Tips -Check Seat Switch -Battery Discharge Indicator, as installed -Current Limiter, as installed -Other Electrical Components, as installed

6) INSPECT HYDRAULIC SYSTEMS

Perform a complete inspection of the forklift’s hydraulic systems to include, but not be limited to, the following:

-All Hydraulic Lines, Hoses, and Fittings -Mast and Hose Reel -Lift, Tilt, and Shift Cylinders -Hydraulic Tank and Breather -Hydraulic Pumps -Attachment Links -Attachment Cylinders -Control Valve Operation and Leaks -Other Hydraulic Systems, as installed

7) LUBRICATE VEHICLE

Perform a complete lubrication of the forklift to include, but not be limited to, the following:

-Steer Axle -Steering Mechanisms -Mast, Chains, Rollers, Carriage Attachments -Brakes and Parking Brake Linkages -Accelerator Pedal -Direction Pedal

-Lift and Tilt Control Hinges -Other Lubrication Points, as installed

8) SERVICE BATTERIES AND BATTERY CHARGERS

Perform a complete servicing of the batteries and the battery charges to include, but not be limited to, the following:

-Perform Battery Voltage Tests -Check/Clean/Adjust Battery Cables -Check/Clean/Adjust Battery Connectors -Clean Terminals, Bus Bars and Top of Battery -Fill Flooded Batteries with Double-Distilled Water -Check Specific Gravity of Cells, as appropriate -Charge Battery and Evaluate Overall Health -Check Battery Charger Settings and Reprogram Chargers, as required

9) PERFORM ADDITIONAL MAINTENANCE ACTIONS

Perform any additional maintenance actions for the forklift to include, but not be limited to, the following:

-Verify Stencils/Markings Per NAVSUP P-538 and Re-Stencil/Re-Mark as needed, marking should include SWL both sides, VW both sides (and in view of operator on mast assembly), all operator controls, Manufacture name plate, Accredited laboratory UL, MHE safety Certification and EE on three sides -Check for Error Codes and Perform Non-Major Repairs, as required, to Clear Code.

-Replace Faulty Encoder Bearings -Check Mast Mounting Trunnions and Re-Torque Bolts, as needed.

-Repack Leaking Lift, Tilt and Shift Cylinders -Adjust Load Chains and Cylinder Rods -Change Hydraulic Oil, Filters, and Breathers -Adjust Hydraulic Pressure, as required -Replace Loose/Warn Hydraulic Pump Motor Mount Bushings -Inspect Lights, Backup Alarm, and Associated Wiring; Repair/Replace, as required.

-Check and Adjust Current Limiter -Remove Steer and Drive (Load) Wheels, Inspect and Repack all four (4) Bearings -Check Brakes, Wheel Cylinders, and Associated Hardware; Adjust/Repair as required.

-Re-Torque Drive and Steer Wheel Nuts -Evacuate Front and Rear Brake Systems; Replace Fluid with DOT 3 Brake Fluid, or per Tech Manual.

-Check and Adjust Rear Brake Master Cylinder, Actuator Cable, Pivot Mechanism, Brake Lines, and Associated Hardware; Repair as required.

-Adjust Parking Brake and Linkage; Repair as required.

-Check and Adjust Plugging Distances -Adjust Steering Linkage; Repair as required -Raise Rear of Vehicle and Manually Test Rear Brake Operation (with brake pedal pressed).

-Re-Adjust all Brakes, as required -Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques.

-Remove, and inspect the counterweight, mounting bolt, for rust, corrosion, worn threads and threaded base plate surface. Re-install the counterweight, and mounting bolts that are within SAE standards, and re-torque the counterweight bolts to 410 foot pounds, or replace the bolts, and re-thread the base plates that fail the visual inspection, as required.

e. WESLEY Manual Pallet Jacks

Perform maintenance actions for the WESLEY Manual Pallet Jacks to include, but not be limited to, the following:

Verify Stencils/Markings per NAVSUP P-538 and Re-Stencil/Re-Mark as needed All Hydraulic Lines, Hoses, and Fittings (change if needed) Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques Brakes and Brake Linkages Lubricate / inspected all wheels (changed if needed)

f. SCOPE OF PERIODIC MAINTENANCE INSPECTION AND SERVICE ENTWISTLE TRAILERS

Perform maintenance actions for the Entwhistle trailers to include, but not be limited to, the following:

-Perform visual inspection of brake linings and replace as necessary -Perform visual inspection of brake wheel cylinders. Repair or replace as required -Perform visual inspection of brake hoses and fittings. Repair or replace as required -Re-Adjust all Brakes, as required -Repair and/or replace service brakes, tie rods, and kingpins as needed -Inspect all wheel bearings -Replace all wheel bearings found to contain pitting, spalling, and/or corrosion -Inspect and replace wheel bearing cups and cones as needed -Remove all old grease from wheel hub cavity and bearings -Repack all bearing cones -Tighten all lug nuts to 90 ft. lbs.

-Lubricate all components in accordance with Lubrication Plate

g. Battery Chargers

Perform maintenance actions for the Battery Changers to include, but not be limited to, the following:

-Clean inside and outside of battery charger -Inspected all wires and connectors -Adjust charger voltage (if needed)

2. Equipment to be serviced:

MSCHQ - TABLE 1

MANUFACTURER MODEL MSC NUMBER SERIAL NUMBER CONDITION REPORT

DISCREPANCIES

HYSTER E40XN 23-02780 A269N03843S PM and Safety Cert HYSTER E40XM 23-01019 F108G04677T PM and Safety Cert HYSTER E40XM 23-01020 F108G04678T PM and Safety Cert HYSTER E40XM 23-02237 F108G01525D PM and Safety Cert HYSTER E40XM 23-02285 F108G30048A PM and Safety Cert HYSTER E40XM 23-02626 F108G04735T PM and Safety Cert

HYSTER E40XM 23-02632 F108G01585S PM and Safety Cert HYSTER E40XM 23-02652 F108G01634T PM and Safety Cert HYSTER E40XM 23-02726 F108G01603T PM and Safety Cert HYSTER E40XM 23-02732 F108G01602S PM and Safety Cert HYSTER E40XM 23-02733 F108G01597T PM and Safety Cert HYSTER E40XM 23-02736 F108G01609S PM and Safety Cert HYSTER E40XM 23-02748 F108G01601S PM and Safety Cert HYSTER E40XM 23-02757 F108G01607T PM and Safety Cert HYSTER E40XM 23-02764 F108G01598T PM and Safety Cert HYSTER E40XM 23-02772 F108G01581S PM and Safety Cert HYSTER E40XM 23-02787 F108G01600T PM and Safety Cert HYSTER E40XM 23-02280 F108G30472B PM and Safety Cert HYSTER E40XM 23-02286 F108G30330B PM and Safety Cert HYSTER E40XM 23-02629 F108G01548S PM and Safety Cert HYSTER E40ZG 23-02055 G108N09168F PM and Safety Cert HYSTER E40ZG 23-02057 G108N09258F PM and Safety Cert HYSTER E40ZG 23-02067 G108N09306F PM and Safety Cert HYSTER E40ZG 23-02075 G108N09308F PM and Safety Cert HYSTER E40ZG 23-02076 G108N09307F PM and Safety Cert HYSTER E40ZG 23-02079 G108N09323F PM and Safety Cert HYSTER E40ZG 23-02089 G108N09520F PM and Safety Cert HYSTER E40ZG 23-02098 G108N09606F PM and Safety Cert HYSTER E40ZG 23-02103 G108N09629F PM and Safety Cert HYSTER E40ZG 23-02311 G108N10619F PM and Safety Cert HYSTER E40ZG 23-02326 G108N10751F PM and Safety Cert HYSTER E40ZG 23-02352 G108N10951F PM and Safety Cert HYSTER E40ZG 23-02353 G108N10952F PM and Safety Cert HYSTER E60XM 23-02204 F108G04661T PM and Safety Cert HYSTER E60XM 23-02205 F108G04662T PM and Safety Cert HYSTER E60XM 23-02208 F108G00797T PM and Safety Cert HYSTER E60XM 23-02209 F108G00798T PM and Safety Cert HYSTER E60XM 23-02703 F108V17623W PM and Safety Cert HYSTER E60XM 23-02704 F108V17629W PM and Safety Cert HYSTER E60XMG40 23-05000 F108G30481B PM and Safety Cert HYSTER E60XMG40 23-05001 F108G30489B PM and Safety Cert HYSTER E60XMG40 23-05002 F108G30483B PM and Safety Cert HYSTER E60XMG40 23-05003 F108G30482B PM and Safety Cert HYSTER E60XMG40 23-05004 F108G30488B PM and Safety Cert HYSTER E60XMG40 23-05005 F108G30480B PM and Safety Cert HYSTER E60XMG40 23-05006 F108G30485B PM and Safety Cert HYSTER E60XMG40 23-05008 F108G30484B PM and Safety Cert

HYSTER E60XMG40 23-05010 F108G30487B PM and Safety Cert HYSTER E60XMG40 23-05021 F108G30491B PM and Safety Cert HYSTER E60ZG 23-02111 G108N08910F PM and Safety Cert HYSTER E60ZG 23-02112 G108N08911F PM and Safety Cert HYSTER E60ZG 23-02113 G108N08907F PM and Safety Cert HYSTER E60ZG 23-02121 G108N08957F PM and Safety Cert HYSTER E60ZG 23-02123 G108N08962F PM and Safety Cert HYSTER E60ZG 23-02125 G108N08960F PM and Safety Cert HYSTER E60ZG 23-02126 G108N08977F PM and Safety Cert HYSTER E60ZG 23-02128 G108N08990F PM and Safety Cert HYSTER E60ZG 23-02129 G108N08985F PM and Safety Cert HYSTER E60ZG 23-02131 G108N09255F PM and Safety Cert HYSTER E60ZG 23-02132 G108N09046F PM and Safety Cert HYSTER E60ZG 23-02133 G108N09050F PM and Safety Cert HYSTER E60ZG 23-02366 G108N11289G PM and Safety Cert HYSTER E60ZG 23-02374 G108N11354G PM and Safety Cert HYSTER E60ZG 23-02379 G108N10950F PM and Safety Cert HYSTER S60XMG 23-01088 D187G29055A PM and Safety Cert HYSTER S60XMG 23-02281 D187G28688A PM and Safety Cert HYSTER S60XMG 23-02282 D187G28547A PM and Safety Cert HYSTER S60XMG 23-05011 D187G31861B PM and Safety Cert HYSTER S60XMG 23-05013 D187G31505B PM and Safety Cert HYSTER S60XMG 23-05014 D187G31692B PM and Safety Cert HYSTER S60XMG 23-05015 D187G31585B PM and Safety Cert HYSTER S60XMG 23-05016 D187G31584B PM and Safety Cert HYSTER S60XMG 23-05017 D187G31586B PM and Safety Cert HYSTER S60XMG 23-05018 D187G32101B PM and Safety Cert HYSTER S60XMG 23-05019 D187G32071B PM and Safety Cert HYSTER S60FTG 23-02143 F187G11847F PM and Safety Cert HYSTER S60FTG 23-02150 F187G11897F PM and Safety Cert HYSTER S60FTG 23-02152 F187G11917F PM and Safety Cert HYSTER S60FTG 23-02158 F187G11942F PM and Safety Cert HYSTER S60FTG 23-02160 F187G11974F PM and Safety Cert HYSTER S60FTG 23-02176 F187G12053F PM and Safety Cert HYSTER S60FTG 23-02178 F187G12291F PM and Safety Cert HYSTER S60FTG 23-02384 F187G14583G PM and Safety Cert HYSTER S60FTG 23-02398 F187G14619G PM and Safety Cert HYSTER S60FTG 23-02414 F187G14656G PM and Safety Cert HYSTER S60FTG 23-02574 F187G18020J PM and Safety Cert HYSTER S60FTG 23-02575 F187G18054J PM and Safety Cert HYSTER S60FTG 23-02576 F187G18063J PM and Safety Cert

HYSTER S60FTG 23-02614 F187G20236K PM and Safety Cert HYSTER S60FTG 23-02615 F187G20237K PM and Safety Cert HYSTER S60FTG 23-02622 F187G18084J PM and Safety Cert HYSTER S60FTG 23-02623 F187G18198J PM and Safety Cert HYSTER H155XL 23-02778 F006G03484U PM and Safety Cert

CAT DP50CN1-D 23-02755 AT19E80093 PM and Safety Cert CAT DP50CN1-D 23-02788 AT19E80264 PM and Safety Cert CAT DP50CN1 23-20001 AT19E80511 PM and Safety Cert CAT DP45K 23-02779 AT19E80266 PM and Safety Cert

DREXEL FL-80 23-00878 894443-003 PM and Safety Cert DREXEL FL-80 23-00961 894441-006 PM and Safety Cert DREXEL FL-80 23-01023 896688-010 PM and Safety Cert

LIFTKING USN4 23-02692 LK88579 PM and Safety Cert LIFTKING USN4 23-02753 LK88643 PM and Safety Cert LIFTKING USN10 23-19004 LK88892 PM and Safety Cert LIFTKING LKSB10K 23-21012 LK88350 PM and Safety Cert

TCM FD30T3 23-02782 A2N901930 PM and Safety Cert WIGGINS MDL W360Y 23-02776 934301 PM and Safety Cert WIGGINS W200Y-SB 23-19006 955023 PM and Safety Cert KALMAR DCB28RORO 23-21013 T34100.0028 PM and Safety Cert HUBTEX VQ 45/4-USN-SB 29-00071 60050 PM and Safety Cert HUBTEX VQ 45/4-USN-SB 29-00072 60051 PM and Safety Cert SROKA EPJ-USN-100-EE 26-01001 181363 PM and Safety Cert SROKA EPJ-USN-100-EE 26-01002 181362 PM and Safety Cert SHRECK LLP10EE 26-00054 16475 PM and Safety Cert

WESLEY INT’L 42-27-60XTSB 28-21004 5Y11245 PM and Safety Cert WESLEY INT’L 42-27-60XTSB 28-21005 07Y14717 PM and Safety Cert WESLEY INT’L 42-27-60XTSB 28-21006 49Y93061 PM and Safety Cert WESLEY INT’L 42-27-60XTSB 28-21007 3Y92130 PM and Safety Cert WESLEY INT’L 42-27-60XTSB 28-21008 0Y93197 PM and Safety Cert WESLEY INT’L 42-27-60XTSB 28-22001 000061286 PM and Safety Cert WESLEY INT’L 42-27-60XTSB 28-22002 000061287 PM and Safety Cert

ENTWISTLE EJ42338 29-03052 62203-049 PM and Safety Cert ENTWISTLE EJ42338 29-03053 62203-044 PM and Safety Cert ENTWISTLE EJ42338 29-03054 62203-045 PM and Safety Cert ENTWISTLE EJ42338 29-03009 61774-008 PM and Safety Cert ENTWISTLE EJ42338 29-03074 62318-74 PM and Safety Cert

ENERSYS EI3-JN-4G W-143 (1st Floor) RVH00273131 36 VOLT ENERSYS EI3-JN-4G W-143 (1st Floor) RVH00273132 36 VOLT ENERSYS EI3-JN-4G W-143 (1st Floor) RVH00273134 36 VOLT ENERSYS EI3-JN-4G W-143 (1st Floor) RUJ00162774 36 VOLT

ENERSYS EI3-JN-4G W-143 (4th Floor)

SH573637 36 VOLT

ENERSYS EI3-JN-4G W-143 (4th Floor)

SH573638 36 VOLT

ENERSYS EI3-JN-4G W-143 (4th Floor)

RVH00273133 24 VOLT

ENERSYS EI3-JN-4G LP-26 (BAY 2) RUJ00162773 36 VOLT

ENERSYS EI3-JN-4G LP-26 (BAY 2) RUJ00162775 36 VOLT

ENERSYS EI3-JN-4G LP-26 (BAY 2) RUJ00162776 24 VOLT

GNB SCR20018865T1H W-143 (1st Floor) 13J0111M 36 VOLT GNB SCR20018865T1H W-143 (1st Floor) 13J0115M 36 VOLT

GNB SCR20018865T1H LP-26 (BAY 2) 13J0110M 36 VOLT

IND. BATTERY ENG. 36CVC675DD3 LP-26 (BAY 2) 227810210 72 VOLT

R.K. MACHINERY FTP-100T LP-26 (BAY 2) 031652031-2853 100 TON TIRE PRESS

3. Deliverables:

The contractor shall provide

a. Contractor shall complete and sign CDRL A0001 Final Inspection form for each unit listed in Table 1.

Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

b. Contractor shall complete and sign CDRL A0002 Fork Inspection form for each unit listed in Table 1.

Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

c. Contractor shall complete and sign CDRL A0003 MHE Safety Certification form for each asset (forklift, side loader, manual pallet jack) listed in Table 1 in accordance with NAVSEA Instruction SW023-AH- WHM-010 reference (a). Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

d. Contractor shall complete and sign CDRL A0004 Work Order form for each asset (forklift, manual pallet jack, and trailer) listed in Table 1 in accordance with NAVSEA Instruction SW023-AH-WHM-010 reference (a). Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

e. Contractor shall send status report of all battery chargers listed in Table 1 to the MHE Program Support Office at MSC Norfolk upon completion of service.

f. Contractor shall coordinate with the technical point of contact to arrange U.S. Government inspection of the MHE/forklifts prior to their return. The inspection will occur on a date mutually agreed upon by the service provider and technical point of contact.

g. Contract must be able to read and understand all items listed on this SOW References (a) and (b), attachments 1 thru 4.

h. If additional repair action are needed, YOU MUST contact N10 contract specialist (MSC government representative) for approval prior to completing. Additional work must be submitted on condition found report within 10 days of receipt.

i. Contractor shall provide a photo of the forklift data plate to the MHE Program Support Office at MSC Norfolk upon completion of service.

4. Qualifications: The selected service provider/contractor must meet the following qualifications.

a. All management and technical personnel performing above listed services must be able to demonstrate the following:

- Experience performing safety certifications on shipboard-approved MHE in accordance with the requirements set forth in the NAVSEA SW023-AH-WHM-010, NAVSUP PUB 538, and equipment technical manuals.

- Experience interpreting, trouble-shooting, and resetting HYSTER on-board dash displays.

- Access to HYSTER proprietary hardware and software required to reset onboard electronics.

- Able to read and understand the Technical Exhibits and meet all requirement.

b. Contractor shall staff and equip the service with the capability to perform all actions without assistance from MSC personnel.

c. Contractor must have access to technical and diagnostic manuals applicable to the equipment being serviced.

d. Contractor shall have the ability to change/press tires using existing location tire press (if available) and/or obtain alternate services relative to satisfying the MHE asset requirement. If contractor is performing fly in service – service provide is not responsible for changing / press tires due to time restraints. Ship will be responsible for pressing tires

e. Contractor must be able to perform the required services within the Period of Performance (POP) identified in this Statement of Work document. If additional work is identified, and approved by the Government, the Contractor must have the ability to complete the additional service work by close of the requested POP as well.

f. Contractor shall complete a security form for each employee that will be servicing MHE onboard government installations and submit the information (including, but not limited to name, social security number, and birth date) to Military Sealift Command (MSC)/MSC Security Officer, as requested. The Government will provide approval for personnel to access base installation locations for a pre-determined timeframe (up to one year), as appropriate.

g. Contractor personnel performing maintenance and repairs onboard MSC vessels or affiliated shore activities shall abide by all DOD, Navy, MSC security requirements and clearance procedures required to access U.S. Government facilities and/or MSC customer locations.

5. NORFOLK - Technical Points of Contact (POCs):

- Primary POC: Damian Schmitt – Email: damian.schmitt.civ@us.navy.mil mailto:damian.schmitt.civ@us.navy.mil

Phone: 757-443-1463

- Alternate POC: Robert Hall – Email: robert.m.hall1.ctr@us.navy.mil Phone: 757-443-2482

6. Travel:

a. Access paperwork: Will be provided by MSC designated representative, as appropriate.

7. Place of Performance:

MSCHQ Building LP-26 and surrounding sites 6 Sep 2022 – 27 Apr 2023

7. Services Contract Reporting (SCR):

Services Contract Reporting (SCR) requirements apply to this contract. The contractor shall report required SCR data fields using the SCR section of the System for Award Management (SAM) at following web address: https://sam.gov/SAM/

8. The provision at FAR 52.212-1, Instructions to Offerors – Commercial applies to this acquisition and is incorporated by reference. The provision is amended as follows:

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

a. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1.

b. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate.

c. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and “quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order.

d. The Government will consider all quotes that are timely received and may consider late quotes in accordance with 52.212-1. Failure of a quote to address any items listed in the attached submission package may make a quote unacceptable.

e. Paragraph (b) of FAR Provision 52.212-1, Submission of Offers, is amended as follows:

In addition to the quote submission requirements stated in FAR provision 52.212-1, quoters shall provide the following, as part of the quote submission package, no later than the required time and date for quote submission:

Responsible sources shall provide the following:

1. Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price

2. Total Firm Fixed price

3. Any Discount Terms

4. Estimated time of delivery

5. Technical Submission Requirements

a. For Parts/Supply buy, the quote shall contain a description including part number and title for each item listed in the solicitation to allow the Government to verify that the quoted parts match mailto:robert.m.hall1.ctr@us.navy.mil the requirements listed in the requirements schedule. Brand Name/OEM parts shall be used for this service.

b. Quote shall contain ALL material, labor and travel to complete the entire service requirement without contract modification.

c. It is strongly encouraged that prospective vendors comply with FAR 52.237-1 Site Visit to determine what material is required prior to submitting a quote. Points of contact are in Paragraph 10 of the SOW.

d. Quote must contain proof that the vendors have the experience and capability as specified in paragraph 9 of the statement of work above. Failure to provide proof will be considered non-compliant and will be deemed non-responsive.

6. Indicate principal place of performance and country of product origin.

7. Responses to the solicitation are due 1200pm EST on 19 August 2022. Quotes may be e-mailed to Rob

Corsino at robert.corsino@navy.mil and James Van Natta at james.m.vannatta.civ@us.navy.mil. . To be considered timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission. Quotes received after that time will be considered at the Government’s sole discretion. Please reference the solicitation number on your quote.

Primary Point of Contact: Rob Corsino 757-443-2788 Secondary Point of Contact: James Van Natta 757-443-5949

9. Provision 52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government may award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement;

(ii) price;

Award shall be made to the lowest priced technically acceptable offeror in LPTA solicitations.

To be considered a technically acceptable solution for a service procurement, the quoted services shall meet the solicitation requirements including terms and conditions stated in the solicitation. The quote shall state that all aspects of the technical requirement, including required delivery date and period of performance can be met.

The Government will evaluate quoted pricing for reasonableness utilizing techniques described in FAR 13.106-3.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror by the Government within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

10. Provision FAR 52.212-3, Offeror Representations and Certifications – Commercial Items applies to this acquisition. Complete and return with quote if required

52.212-3 -- Offeror Representations and Certifications -- Commercial Items (May 2022) mailto:robert.corsino@navy.mil mailto:james.m.vannatta.civ@us.navy.mil

Microsoft Word Document

11. Clause 52.212-4 Contract Terms and Conditions – Commercial items, applies to this acquisition.

Quotes submitted in response to this solicitation shall not contain nor be subject to the vendor’s standard commercial terms and conditions. Any quote submitted in response to this solicitation, which includes the vendor's standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation.

12. Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items (May 2022), applies to this acquisition along with the following FAR Clauses cited in the clause are applicable.

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.] X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV

2021) (41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-282)

( 31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111-117, section

743 of Div. C).

X (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for

Debarment. (NOV 2021) (31 U.S.C. 6101 note).

X (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (SEP 2021) (15 U.S.C. 657a).

__ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (SEP 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (13) [Reserved] __ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-6.

__ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-7.

X (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

X (17) (i) 52.219-9, Small Business Subcontracting Plan (NOV 2021) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (NOV 2016) of 52.219-9.

__ (iii) Alternate II (NOV 2016) of 52.219-9.

__ (iv) Alternate III (JUN 2020) of 52.219-9.

__ (v) Alternate IV (SEP 2021) of 52.219-9.

__ (18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (MAR 2020) of 52.219-13.

https://www.acquisition.gov/far/part-52#FAR_52_203_19 https://www.acquisition.gov/far/part-52#FAR_52_204_23 https://www.acquisition.gov/far/part-52#FAR_52_204_25 https://www.acquisition.gov/far/part-52#FAR_52_209_10 https://www.acquisition.gov/far/part-52#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_203_15 https://www.acquisition.gov/far/part-52#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_204_14 https://www.acquisition.gov/far/part-52#FAR_52_204_15 https://www.acquisition.gov/far/part-52#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_6 https://www.acquisition.gov/far/part-52#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_7 https://www.acquisition.gov/far/part-52#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_13

__ (19) 52.219-14, Limitations on Subcontracting (SEP 2021) (15 U.S.C. 637s).

X (20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (SEP 2021) (15 U.S.C. 657f).

X (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (SEP 2021) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (MAR 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business

Concerns (SEP 2021) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the

Women-Owned Small Business Program (SEP 2021) (15 U.S.C. 637(m)).

__ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

__ (26) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15U.S.C. 637(a)(17)).

X (27) 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

__ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN 2022) (E.O.13126).

X (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

X (30) (i) 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

__ (ii) Alternate I (FEB 1999) of 52.222-26.

X (31) (i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

X (ii) Alternate I (JUL 2014) of 52.222-35.

X (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

__ (ii) Alternate I (JUL 2014) of 52.222-36.

X (33) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

__ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

X (35) (i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (36) 52.222-54, Employment Eligibility Verification (MAY 2022) . (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008)

( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

__ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O.

13693).

__ (40) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (OCT 2015) of 52.223-13.

__ (41) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

__ (43) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (JUN 2014) of 52.223-16.

X (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513).

__ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

__ (46) 52.223-21, Foams (Jun2016) (E.O. 13693).

__ (47) (i) 52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (JAN 2017) of 52.224-3.

__ (48) 52.225-1, Buy American-Supplies (NOV 2021) (41 U.S.C. chapter 83).

__ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV

2021) (41 U.S.C.chapter83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108- 78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (JAN 2021) of 52.225-3.

__ (iii) Alternate II (JAN 2021) of 52.225-3.

__ (iv) Alternate III (JAN 2021) of 52.225-3.

__ (50) 52.225-5, Trade Agreements (OCT 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the

Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) (42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42 U.S.C. 5150).

__ (55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

__ (56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV

2021) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

__ (57) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV

2021) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

X (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (OCT2018) (31 U.S.C. 3332).

__ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

__ (61) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

X (62) 52.242-5, Payments to Small Business Subcontractors (JAN 2017) (15 U.S.C. 637(d)(13)).

https://www.acquisition.gov/far/part-52#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_16 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_28 https://www.acquisition.gov/far/part-52#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/part-52#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/part-52#FAR_52_222_3 https://www.acquisition.gov/far/part-52#FAR_52_222_19 https://www.acquisition.gov/far/part-52#FAR_52_222_21 https://www.acquisition.gov/far/part-52#FAR_52_222_26 https://www.acquisition.gov/far/part-52#FAR_52_222_26 https://www.acquisition.gov/far/part-52#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_35 https://www.acquisition.gov/far/part-52#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_36 https://www.acquisition.gov/far/part-52#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_40 https://www.acquisition.gov/far/part-52#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_222_54 https://www.acquisition.gov/far/part-22#FAR_22_1803 https://www.acquisition.gov/far/part-52#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_11 https://www.acquisition.gov/far/part-52#FAR_52_223_12 https://www.acquisition.gov/far/part-52#FAR_52_223_13 https://www.acquisition.gov/far/part-52#FAR_52_223_13 https://www.acquisition.gov/far/part-52#FAR_52_223_14 https://www.acquisition.gov/far/part-52#FAR_52_223_14 https://www.acquisition.gov/far/part-52#FAR_52_223_15 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_16 https://www.acquisition.gov/far/part-52#FAR_52_223_16 https://www.acquisition.gov/far/part-52#FAR_52_223_18 https://www.acquisition.gov/far/part-52#FAR_52_223_20 https://www.acquisition.gov/far/part-52#FAR_52_223_21 https://www.acquisition.gov/far/part-52#FAR_52_224_3 https://www.acquisition.gov/far/part-52#FAR_52_224_3 https://www.acquisition.gov/far/part-52#FAR_52_225_1 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_225_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3…