Combined Solicitation SPMYM3-21-Q 1023.pdf

SPMYM3-21-Q-1023

10494021-10494034

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to beta.SAM.gov. The RFQ number is SPMYM3-21-Q-1023. This solicitation documents and incorporates provisions and clauses in effect through FAC 2021-05 and DFARS Change Notice 20210224. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses:

https://www.ecfr.gov. The FSC is 4720. The NAICS code is 326220 and the Small Business Standard is 750 Employees. This is a 100% Small Business set aside

The Place of Manufacture / Country of Origin MUST BE IDENTIFIED.

This is to be evaluated as “ALL OR NONE”

*****URGENT*****

REQUIRED DELIVERY DATE: 24 April 2021

Evaluation criteria is Best Value: Earliest Delivery Time, however, SPRS will be used to determine vendor responsibility.

Potential contractors will be screened for responsibility in accordance with FAR 9.104.

Quotes e-mailed to stephen.seiger@dla.mil

The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:

MATERIAL INFORMATION

ITEM DESCRIPTION U/I QTY UNIT PRICE TOTAL PRICE

0001 Vent Duct 4” Aluminum FT 400 ____________ _____________ Vent Duct 4" Aluminum, New England Rubber part number IN20AL-4-20. 4" ID X 20' lengths.

Unlined w/no packing. Interlocking Flexible Aluminum Hose Assembly. Manufacture to 0.019" to 0.020" thick material w/unlocked & deburred end cuts. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid.

0002 Vent Duct 3” FT 1,920 ____________ _____________ Vent Duct 3", New England Rubber part number TR-FR-BK-BL-3. 3" ID X 24' lengths . Flex-tube TR- FR 3" per attached Spec; Color: black w/ blue helix. Technical review required by code 220P. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Flex Tube Thermoplastic Rubber – TR-FR for item and material specifications

0003 Vent Duct 4” FT 1,920 ____________ _____________ Vent Duct 4", New England Rubber part number TR-FR-BK-BL-4. 4" ID X 24' lengths. Flex-tube TR- FR 4" per attached Spec; Color: black wl blue helix. Technical review required by code 220 If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. New vendors required to submit 1 ft section of proposed vent for material testing prior to award. See ATTACHMENT 1: Statement of Work, and ATTACHMENT 2: Vent Duct Specifications.

0004 Vent Duct 6” FT 1,200 ____________ _____________ Vent Duct 6", New England Rubber part number TR-FR-BK-BL-6. 6" ID X 24' lengths. Flex-tube TR- FR 6" per attached Spec; Color: black w/ blue helix. Technical review required by code 220P. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement of Work, and ATTACHMENT 2: Vent Duct Specifications.

0005 Vent Duct 8” FT 1,800 ____________ _____________ Vent Duct 8", New England Rubber part number TR-FR-BK-BL-8. 8" ID X 24' lengths. Flex-tube TR- FR 8" per attached Spec; Color: black w/ blue helix . Technical review required by code 220P. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1:

Statement of Work, and ATTACHMENT 2: Vent Duct Specifications.

0006 Vent Duct 4” FT 1,920 ____________ _____________ Vent Duct 4", New England Rubber part number TR-FR-BK-GR-4. 4" ID X 24' lengths. Flex-tube TR- FR 4" per attached Spec; Color: black w/ green helix. Technical review required by code 220P. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement

0007 Vent Duct 8” FT 2,400 ____________ _____________ Vent Duct 8", New England Rubber part number TR-FR-BK-GR-8. 8" ID X 24' lengths. Flex-tube TR- FR 8" per attached Spec; Color: black w/ green helix . Technical review required by code 220P. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement

0008 Vent Duct 8” FT 1,800 ____________ _____________ Vent Duct 8", New England Rubber part number EF-FR-BL-BK-8. 8" ID X 24' lengths. Eco friendly EF-FR 8" per attached Spec; Color: blue w/ black helix Technical review required by code 220P. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement of Work, and ATTACHMENT 2: Vent Duct Specifications.

0009 Vent Duct 20” FT 2,700 ____________ _____________ Insulated Flexible Ventilation Ducting, New England Rubber part number ARTIC-WH-20, 20" ID X 25' lengths. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement of Work, and ATTACHMENT 2:

Vent Duct Specifications.

0010 Vent Duct 3” Aluminum FT 600 ____________ _____________ Vent Duct 3" Aluminum, New England Rubber part number IN20AL-3-20.3" ID X 20' lengths. Unlined w/no packing. Interlocking Flexible Aluminum Hose Assembly. Manufacture to 0.019" to 0.020" thick material w/unlocked & deburred end cuts. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement of Work, and ATTACHMENT 2: Vent Duct Specifications.

0011 Vent Duct 6” Aluminum FT 100 ____________ _____________ Vent Duct 6" Aluminum, New England Rubber part number IN20AL-6-10. 6" ID X 10' lengths. Unlined w/no packing. Interlocking Flexible Aluminum Hose Assembly. Manufacture to 0.019" to 0.020" thick material w/un locked & deburred end cuts. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement of Work, and ATTACHMENT 2: Vent Duct Specifications.

0012 Vent Duct 8” aluminum FT 400 ____________ _____________ Vent Duct 8" Aluminum, New England Rubber part number IN20AL-8-20. 8" ID X 20' lengths. Unlined wino packing. Interlocking Flexible Aluminum Hose Assembly. Manufacture to 0.019" to 0.020" thick material w/ unlocked & deburred end cuts. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement of Work, and ATTACHMENT 2: Vent Duct Specifications.

0013 Vent Duct 8” FT 1,200 ____________ _____________ Vent Duct 8", New England Rubber part number EF-FR-GR-BK-8.8" ID X 24' lengths. Flex-tube EF- FR 8" per attached Spec; Color: green w/ black helix. Technical review required by code 220P. If vendor is not on Approved Vendor List (attached), they must provide a 1 ft sample with bid. See ATTACHMENT 1: Statement of Work, and ATTACHMENT 2: Vent Duct Specifications.

52.204-7 System for Award Management 52.204-9 Personal Identity Verification of contractor Personnel 52.204-10 Reporting Executive Compensation and First Tire Subcontract Awards 25.204-19 Incorporation by Reference of Representations and Certifications 52.204-13, SAM Maintenance 52.204-24 See Attachment for this provision 52.204-25 See Attachment for this clause 52.204-26 See Attachment for this provision 52.211-14, Notice of Priority Rating 52.211-15, Defense Priority and Allocation Requirements 52.211-17, Delivery of Excess Quantities 52.212-1, Instructions to Offerors 52.212-3 Alt I Instructions to Offerors Evaluation Offeror Reps and Certs 52.212-4 Contract Terms and Conditions- Commercial Items 52.222-22 Previous Contracts & Compliance Reports 52.222-25 Affirmative Action Compliance 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transaction Related to Iran-Reps and Certs 52.232-39, Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-2 Service of Protest 52.242-13 Bankruptcy 52.242-15 Stop Work Order 52.243-1 Changes fixed Price

52.246-1 Contractor Inspection Requirements 52.247-34 F.O.B—Destination 52.252-1 Solicitation Provisions Incorporated by Reference 52.252-2 Clauses Incorporated by Reference 52.253-1 Computer Generated Forms 252.203-7000 Requirements related to Compensation of former DoD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7003 Control of Government Personnel Work Product 252.204-7004 System for Award Management 252.204-7008 DEV Compliance With Safeguarding Covered Defense Information Controls 252.204-7011 Alternative Line Item Structure 252.204-7012 Safeguarding of Unclassified Controlled Technical Information 252.204-7015 Disclosure of Information to Litigation Support Contractors 252-204-7016 Covered Defense Telecommunications Equipment or Services 252.204-7017 Prohibition on Acquisition of Covered Defense Communications 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7001 Buy American Act & Balance of Payments Program 252.225-7012 Preference for Certain Commodities 252.225-7048 Export Controlled Items 252.232-7003 Electronic Submission of Payment Requests 252.232-7006 Wide Area Workflow Payment Instructions 252.232-7010 Levies on Contract Payments 252.243-7001 Pricing of Contract Modifications 252.243-7002 Requests for Equitable Adjustment 252.244-7000 Subcontracts for Commercial Items 252.247-7023 Transportation of Supplies By Sea and 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including:

52.204-10 Reporting Executive Compensation 52-209-6 Protecting the Government’s Interest

52.219-6 Notice of Small Business Set-Aside 52.219-28 Post Award Small Business Program Representation 52.219-33 Nonmanufacturer Rule 52.222-3 Convict Labor 52.222-19 Child Labor – Cooperation with Authorities and Remedies

52.222.35 Equal Opportunity for Veterans

52.222-37 Employment Reports on Veterans 52.221-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-36 Affirmative Action for Workers w/ Disabilities 52.222-50 Combating Trafficking in Persons, 52.223-11 Ozone Depleting Substances, 52.223-18 Encouraging Contractor Policies to Ban Test Messaging While Driving, 52.225-3 Buy American-Free Trade Agreements 52.225-13 Restrictions on Certain Foreign Purchases.

52.232-33 Payment by Electronic Funds Transfer SAM

Attention to the three clauses below, 52.204-24, 52.204-26, and 252.204-7016 need to be filled in

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

As prescribed in 4.2105(a), insert the following provision:

REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT (AUG 2020)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it “does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument” in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub.

L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services.”

(d) Representations. The Offeror represents that—

(1) It [ ] will, [ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds “will” in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that—

It [ ] does, [ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does” in paragraph (d)(2) of this section.

(e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded “will” in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded “does” in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION

(OCT 2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ] does, [ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ] does, [ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision)

252.204-7016 COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES --

REPRESENTATION (DEC 2019)

(a) Definitions. As used in this provision, covered defense telecommunications equipment or services has the meaning provided in the clause 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered defense telecommunications equipment or services”.

(c) Representation. The Offeror represents that it [ ] does, [ ] does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of provision) https://www.sam.gov/

52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (AUG 2020)

(a) Definitions. As used in this clause--

Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet).

Covered foreign country means The People's Republic of China.

Covered telecommunications equipment or services means--

(1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities);

(2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities);

(3) Telecommunications or video surveillance services provided by such entities or using such equipment; or

(4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.

Critical technology means--

(1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations;

(2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled--

(i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or

(ii) For reasons relating to regional stability or surreptitious listening;

(3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities);

(4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material);

(5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or

(6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817).

Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another's network to hand off traffic where it is ultimately delivered (e.g., connection of a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources.

Reasonable inquiry means an inquiry designed to uncover any information in the entity's possession about the identity of the producer or provider of covered telecommunications equipment or services used by the entity that excludes the need to include an internal or third-party audit.

Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high.

Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract, or extending or renewing a contract, with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract.

(c) Exceptions. This clause does not prohibit contractors from providing--

(1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(d) Reporting requirement.

(1) In the event the Contractor identifies covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system, during contract performance, or the Contractor is notified of such by a subcontractor at any tier or by any other source, the Contractor shall report the information in paragraph (d)(2) of this clause to the Contracting Officer, unless elsewhere in this contract are established procedures for reporting the information; in the case of the Department of Defense, the Contractor shall report to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the https://dibnet.dod.mil/ case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.

(2) The Contractor shall report the following information pursuant to paragraph (d)(1) of this clause:

(i) Within one business day from the date of such identification or notification: The contract number; the order number(s), if applicable; supplier name; supplier unique entity identifier (if known); supplier Commercial and Government Entity (CAGE) code (if known); brand; model number (original equipment manufacturer number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the information in paragraph (d)(2)(i) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of covered telecommunications equipment or services, and any additional efforts that will be incorporated to prevent future use or submission of covered telecommunications equipment or services.

(e) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (e) and excluding paragraph (b)(2), in all subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial items.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

YM3 A1 INVOICING AND PAYMENT INSTRUCTIONS:

Contracting Officer’s point of contact is:

Stephen Seiger, Code KME.SS Tel: 207-438-1320

Submit invoices via Wide Area Workflow (https://wawf.eb.mil) in accordance with the instructions contained in FAR 252.232-7006 (Wide Area Workflow Payment Instructions).

Calls inquiring on payments can be made to DFAS Columbus Customer Service at 800-756-4571.

WAWF invoice/reject inquiries can be made to ask DFAS by email at: https://www.dfas.mil/dfas/AskDFAS/

The DFAS website is https://www.dfas.mil/dfas/AskDFAS/DoDAAC.html

(End of Clause)

YM3 C500 MERCURY CONTROL (SUPPLIES)

Mercury or mercury containing compounds shall not be intentionally added or come in direct contact with hardware or supplies furnished under this contract

YM3 C528 SPECIFICATION CHANGES

No changes to specification or other contract technical requirements are allowed without Contracting Officer approval.

YM3 D2 QA MARKING OF SHIPMENTS

https://dibnet.dod.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/ https://www.dfas.mil/dfas/AskDFAS/ https://www.dfas.mil/dfas/AskDFAS/ https://www.dfas.mil/dfas/AskDFAS/ https://www.dfas.mil/dfas/AskDFAS/DoDAAC.html https://www.dfas.mil/dfas/AskDFAS/DoDAAC.html

The contractor shall mark all shipments of military packaged items in accordance with MIL-STD-129 (Latest Revision) “Marking for Shipment and Storage” and all commercially packaged items in accordance with ASTM- D3951 (Latest Revision) “Standard Practice for Commercial Packaging”.

ALL EXTERIOR CONTAINERS/PACKS SHALL AS A MINIMUM BE MARKED AS FOLLOWS:

1. Applicable National Stock Number (NSN), Federal Stock Number (FSN), Local Stock Number (LSN), or

Part Number, when neither NSN nor FSN or LSN are available.

2. Quantity

3. QA Designator: QA 4

4. Government Contract or Purchase Order Number (incl. Delivery Order No)

5. From: (Contractor’s Name and Address)

6. To: (Shipment Address)

7. Markings may be applied by any means, which provide legibility 8. Additional markings required are stated below:

NONE

(End of Clause)

YM3 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)

Preservation, packaging and packing shall be in accordance with ASTM Designation D-3951(Latest Revision), “Standard Practice for Commercial Packaging

YM3 D8 PROHIBITED PACKING MATERIALS

The use of asbestos or excelsior is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use.

YM3 E2 INSPECTION AND ACCEPTANCE (DESTINATION)

Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity. Receiving activity shall execute acceptance certificate on the applicable inspection and receiving report form: DD Form 1155, Standard Form 44, DD form 250, or the Wide Area Workflow (WAWF) Receipt and Acceptance Receiving Report. The executed payment copy shall be forwarded to the paying office within four (4) workdays thereafter.

YM3 G504 NOTICE OF CONSTRUCTIVE ACCEPTANCE PERIOD

Contractors are hereby advised that the constructive acceptance period established in accordance DFARS 232.904 and, as applicable in either 52.212-4 (i) (2) or 52.232-25 (a) (5) (I) (Prompt Payment), is revised to 45 calendar days in lieu of 7 calendar days.

YM3 F500 CONSIGNMENT INSTRUCTIONS FOR DELIVERIES TO THE PORTSMOUTH NAVAL

SHIPYARD

Consign Parcel Post shipments to Portsmouth, NH 03801.

For access to the Portsmouth Naval Shipyard (PNS), contact PNS Security Pass Office at 207-438-2235/2614.

MARK SHIPPING DOCUMENTS: “Notify Receiving Officer, Portsmouth Naval Shipyard prior to arrival for delivery instructions. Telephone: 207-438-5521/5206”.

NOTICE: CARRIER’S DRIVERS ENTERING PORTSMOUTH NAVAL SHIPYARD MUST BE UNITED

STATES CITIZENS BY BIRTH OR MUST CARRY EVIDENCE OF NATURALIZATION.

Except by special arrangement, shipments will be received only between the hours of 7:00 AM and 2:30 PM local time, Monday through Friday (Federal Holidays excepted).

(End of Clause)

INSPECTION AND ACCEPTANCE (DESTINATION)

Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity. Receiving activity shall execute acceptance certificate on the applicable inspection and receiving report form: DD Form 1155, Standard Form 44, DD form 250, or the Wide Area Workflow (WAWF) Receipt and Acceptance Receiving Report. The executed payment copy shall be forwarded to the paying office within four (4) workdays thereafter.

DISPUTES – AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (DEC 2016)

(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute.

Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.

(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party.

The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.2331), or, for the Agency, by the contracting officer, and approved at a level above the contracting officer after consultation with the ADR Specialist and legal counsel. Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the contracting officer before determining ADR to be inappropriate.

(c) If you wish to opt out of this clause, check here [ ]. Alternate wording may be negotiated with the contracting officer.

(End of Provision)

DLA PROCUREMENT NOTES

C01 Superseded Part Numbered Items (SEP 2016) If an item part number is superseded during the term of this contract, the contractor shall advise the contracting officer immediately upon determination. The notice shall include complete information on the superseding item form, fit, function, configuration, application, or physical nature. The contracting officer will determine whether the item is acceptable to the Government, advise the contractor within seven days, and modify the contract accordingly.

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components. The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.

In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry

Data Exchange Program (GIDEP), where feasible; and to provide immediate advance notice of production phaseout to DLA DMSMS at dscc.dmsms@dla.mil. *****

C03 Contractor Retention of Supply Chain Traceability Documentation (SEP 2016)

(1) By submitting a quotation or offer, the contractor agrees that, when the contractor is not the manufacturer of the item, it is confirming that it currently has or will obtain before delivery and shall retain documented evidence (supply chain traceability documentation) that the item is from the approved manufacturer and conforms to the technical requirements. The retention period is five years after final payment under this contract.

(2) At a minimum, the supply chain traceability documentation for the item shall include: basic item description, part number and/or national stock number, manufacturing source, manufacturing source’s Commercial and Government Entity (CAGE) code, and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to item(s) acceptance by the Government. The documentation should also include, where available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

(3) Examples of acceptable supply chain traceability documentation can be found at:

http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection-Avoidance-Program/

(4) The contractor shall immediately make available documentation upon request of the contracting officer.

The contracting officer determines the acceptability and sufficiency of documentation. If the contractor fails to retain or provide the documentation or the contracting officer finds the documentation to be unacceptable, corrective action may be taken including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017) The Government may correct packaging or labeling deficiencies if the estimated costs of the corrections are $300 or less ($500 for C&T items). The contracting officer will advise the contractor of the discrepancy and that the Government has completed the repackaging or relabeling. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

If the estimated costs of repackaging or relabeling are more than $300 ($500 for C&T), the contracting officer may advise the contractor of the discrepancy and have the material returned to the contractor for correction/resubmittal; or, if there are urgent requirements, have the Government remediate the discrepancy at the contractor’s expense. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

C20 Vendor Shipment Module (VSM) (AUG 2017)

(1) DLA’s Vendor Shipment Module (VSM) is a web-based system available to DLA contractors for the purpose of obtaining current shipping addresses, two-dimensional bar coded shipping labels in accordance with MIL-STD- 129P, bills of lading, packing lists, and other shipping documentation. VSM replaces the need for the contractor to contact the transportation office prior to shipping items. The use of VSM for f.o.b. destination contracts allows for the printing of labels and can also be used to print labels and arrange for shipping on f.o.b. origin contracts.

(2) To obtain information for contracts administered by DLA or to register as a VSM user, contact the DLA VSM Helpdesk at (800) 456-5507 or via email to delivery@dla.mil.

(a) Prior to contacting the Government that material is ready to ship, the contractor shall complete their VSM profile, to include regular business hours and observed holidays. The Government may request reimbursement for occurrences when the Government sends carrier equipment but is unable to pick-up a shipment due to the material not being available or the contractor being closed.

(3) To obtain information for contracts administered by DCMA, contact the DCMA VSM Helpdesk at (314) 331-5573 or vsm.shipments@dcma.mil.

G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017) Contractors shall include the Transportation Control Number (TCN) and carrier shipment tracking information when submitting the DD250/iRAPT Receiving Report in Wide Area Workflow (WAWF) in order to assist with material inspection and acceptance.

H10 Awardee Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020) Awardee has confirmed it will not require access to DLA controlled technical data or information for contract performance, and it will provide items that conform to the current revision of applicable technical data.

L01 Electronic Award Transmission (SEP 2016) Notice of awards are provided to suppliers by either:

(1) Electronic email containing a link to the electronic copy of the Department of Defense (DD) Form 1155, Order for Supplies or Services, on the DIBBS; or

(2) Electronic Data Interchange (EDI) 850 utilizing American National Standards Institute (ANSI) X12 Standards through a DLA transaction services approved Value Added Network (VAN).

Information regarding EDI, ANSI X12 transactions and DLA transaction services approved Value Added Networks (VANs) can be obtained at https://www.transactionservices.dla.mil/daashome/edivanlistdla.asp.

Questions concerning electronic ordering should be directed to the appropriate procuring organization point of contact below:

DLA Land and Maritime, Helpdesk.EBS.L&M.LTCs@dla.mil DLA Troop Support, dlaedigroup@dla.mil DLA Aviation, avnprocsysproceddiv@dla.mil, phone # 804-279-4026

L06 Agency Protests (DEC 2016) Interested parties may file an agency level protest with the contracting officer or may request an independent review by the chief of the contracting office (CCO). Independent review by the CCO is an alternative to consideration by the contracting officer and is not available as an appellate review of a contracting officer decision on a protest previously filed with the contracting officer. Absent a clear indication of the intent to file an agency level protest with the CCO for independent review, protests will be presumed to be protests to the contracting officer.

L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (APR 2018)

(1) The Supplier Performance Risk System (SPRS) (https://www.sprs.csd.disa.mil) (formerly Past Performance Information Retrieval System – Statistical Reporting (PPIRS-SR)) will be used in the evaluation of suppliers’ past performance.

(2) SPRS collects quality and delivery data on previously awarded contracts and orders from existing Department of Defense reporting systems to classify each supplier’s performance history by Federal supply class (FSC) and product or service code (PSC). The SPRS application provides the contracting officer quantifiable past performance information regarding a supplier's quality and delivery performance for the FSC and PSC of the supplies being purchased.

(3) The quality and delivery classifications identified for a supplier in SPRS will be used by the contracting officer to evaluate a supplier’s past performance in conjunction with the supplier’s references (if requested). The Government will use this past performance information in accordance with the basis for award stated in the solicitation.

L09 Reverse Auction (OCT 2016) The Contracting Officer may utilize reverse auctioning to conduct price discussions. If the Contracting Officer does not conduct a reverse auction, award may be made on initial offers or following discussions. If the Contracting Officer decides to use line reverse auctioning to conduct price negotiations, the Contracting Officer will notify Offerors of this decision and the following applies:

(1) The contracting officer may use reverse auction as the pricing technique during discussions to receive the final offered prices from each offeror.

(2) During each round of reverse auction, the system displays the lowest offer price(s) unless the auction instructions are different. All offerors and authorized auction users see the displayed lowest price(s). This disclosure is anonymous and a generic identifier displays for the offeror. Generic identifiers include designators such as “offer A” or “lowest-priced offeror.” By submitting a proposal in response to the solicitation, offerors agree to participate in the reverse auction and that their prices may be disclosed, including to other offerors, during the reverse auction.

(3) An offeror’s final auction price at the close of the reverse auction is considered its final price proposal revision. No price revisions will be accepted after the close of the reverse auction, unless the contracting officer decides that further discussions are needed and final price proposal revisions are again requested in accordance with Federal Acquisition Regulation (FAR) 15.307, or the contracting officer determines that it would be in the best interest of the Government to re-open the auction.

(4) The contracting officer identifies participants to the DLA commercial reverse auction service provider. To be eligible for award and participate, the offeror must agree with terms and conditions of the entire solicitation and the commercial reverse auction service. The reverse auction pricing tool system administrator sends auction information in an email. The reverse auction system designates offers as "lead," meaning the current low price in that auction, or "not lead," meaning not the current low price in that auction. In the event of a tie offer, the reverse auction provider's system designates the first offer of that price as "lead" and the second or subsequent offer of that price as "not lead." If a tie offer is submitted and no evaluation factors other than price were identified in the solicitation or a low-price technically acceptable source selection is being used, the "Not Lead” offeror that submitted the tie offer must offer a changed price; otherwise its offer will be ineligible for award. If evaluation factors in addition to price were listed in the solicitation and a tradeoff source selection is being used, tie offers that are "Not Lead" will be considered and evaluated.

(5) Offerors unable to enter pricing through the commercial reverse auction service provider’s system during a reverse auction must notify the contracting officer or designated representative immediately. The contracting officer may, at their sole discretion, extend or re-open the reverse auction if the reason for the offeror’s inability to enter pricing is determined to be without fault on the part of the offeror and outside the offeror’s control.

(6) Training. The commercial reverse auction service provider or government representative conducts training for offerors. Offerors receive training through written material, the commercial reverse auction service provider’s website, or other means. Trainers name employees successfully completing the training as a “Trained Offeror.” Only trained offerors may engage in a reverse auction. The contracting officer reserves the right to remove the “trained offeror” title from anyone who fails to obey the solicitation or commercial reverse auction service provider terms and conditions.

L31 Additive Manufacturing (JUN 2018)

(1) Additive manufacturing (AM) is a process of joining materials to make objects from three-dimensional (3D) model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies, which remove material from areas where it is not desired, or other traditional manufacturing technologies, such as molding or stamping.

(2) Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM-produced item may submit a request to the contracting officer for approval of the item for evaluation by the Engineering Support Activity (ESA) for acceptability for future procurements of the same items.

(3) If an item produced using AM is presented to the Government for inspection and acceptance that was not authorized in the solicitation/contract, the Government may reject the item as nonconforming.

M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016) (1) All offers for unused former Government surplus property shall have a $200 evaluation factor.

(2) All offers for CSI require evaluation by the ESA(s). An evaluation factor of $600 shall be applied for coordination with each ESA.

(3) If the contracting officer cannot determine acceptability and coordinates with the ESA(s) on other than CSI, an evaluation factor of $600 shall be applied for each ESA.

This announcement will close at 10:00 AM EST on Monday April 12th, 2021.The Point of Contact for this solicitation is Steve Seiger who can be reached at email stephen.seiger@dla.mil A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government.] All responsible sources may submit a quote which shall be considered by the agency.

52.212-2, Evaluation - Commercial Items is applicable to this procurement. While price will be a significant factor in the evaluation of offers, the final contract award will be based on a combination of factors - a combination of price, technically acceptable low bids and past performance.

System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award.

Registration is free and can…