CDRLs.pdf

PDF 201 KB Posted Mar 18, 2021

Attached to: F-16 Frequency Multiplier Radar Repairs Federal contract opportunity
Solicitation number: FA8251-21-Q-0003
Issued by: Department of the Air Force Materiel Command Air Force Sustainment Center

View the file

Other files for this federal contract opportunity

Other files attached to F-16 Frequency Multiplier Radar Repairs, newest first.
File	Type	Posted
FA825121Q0003.pdf	PDF	Mar 18, 2021
Item Description.pdf	PDF	Mar 18, 2021
Packaging Requirements.pdf	PDF	Mar 18, 2021
Packaging SOW.pdf	PDF	Mar 18, 2021
PWS.pdf	PDF	Mar 18, 2021
IUID.pdf	PDF	Mar 18, 2021
Section L.pdf	PDF	Mar 18, 2021
Section M.pdf	PDF	Mar 18, 2021
Transportation.pdf	PDF	Mar 18, 2021
Wage Determination.pdf	PDF	Mar 18, 2021
Repair Qualification Requirements.pdf	PDF	Mar 18, 2021

Show all 11

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

B MISC

Multiplier Assembly FD2020-21-00008

B001 Counterfeit Prevention Plan CPP

DI-MISC-81832 PWS Paragraph: 3.5 416 SCMS/GUMAD

A D

OTIME

SEE BLK 16

416 SCMS/ 1

GUMAD

6070 Gum LN Bldg. 1213 Attn: F-16 Avionics Engineer Hill AFB, UT 84056-5825

SEE BLK 16

0 1 0

NOTE: Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Blocks 7, 14:

a. The contractor shall submit the DD Form 250 (Material Inspection and

Receiving Report) electronically via the Internet to iRAPT (WAWF) website address: https://wawf.eb.mil using DODAAC FA8251. MARK FOR: Address in block 14a.

b. The contractor shall send the Contractors Counterfeit Protection Plan (CPP) and notice of posting to (WAWF) via e-mail to the following e-mail address: javad.refahiyat@us.af.mil

2. Blocks 8, 10, 11, 12, 13: The contractor shall deliver the Counterfeit prevention Plan (CPP) NLT thirty (30) calendar days after contract award. The Government comments will be provided to the contractor within fourteen (14) calendar days after receipt. The contractor shall resubmit the CPP NLT seven (7) calendar days after receipt of Government comments.

3. Block 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

a. DISTRIBUTION STATEMENT "D": Distribution authorized to the Department of Defense and U.S. DoD contractors only (Administration or Operational Use). (July 2019). Other requests for this document shall be referred to (416 SCMS/GUMAD, Hill AFB, UT 84056-5826).

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

NSP

0.00

02/05/2020 02/25/2020

1 2

PINNEGAR.STEPH

ANIE.A.1102660737

Digitally signed by

PINNEGAR.STEPHANIE.A.11026

60737 Date: 2020.02.05 10:34:00 -07'00'

BAKER.HEATHE

R.M.1394952660

Digitally signed by

BAKER.HEATHER.M.1394952660

Date: 2020.02.25 08:50:09 -07'00'

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

Page of Pages

B MISC

Multiplier Assembly FD2020-21-00008

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate IAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

2 2

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

B MGMT

Multiplier Assembly FD2020-21-00008

B002 Item Unique Identification (IUID) Marking Plan IUID Marking Plan

DI-MGMT-81803/T PWS Paragraph: 3.6 416 SCMS/GUMAD

A D

ONE/R

SEE BLK 16

416 SCMS/ 1

GUMAD

6070 Gum LN Bldg. 1213 Hill AFB, UT.

84056-5825

SEE BLK 16

AFMC PZABB/ 1

6050 Gum LN

BLDG 1215

HILL AFB, UT

84056-5825

SEE BLK 16

0 2 0

NOTE: Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 4: Contractor's format is acceptable using Microsoft Office 2013 compatible products (Word, Power point) or Adobe Portable Document Format

(PDF).

2. Blocks 7, 14:

a. The contractor shall submit DD Form 250 (Material Inspection and Receiving Report) electronically via the Internet to iRAPT (WAWF) website address: https://wawf.eb.mil using DODAAC FA8251. MARK FOR: First Address in block 14a.

b. The contractor shall submit a Letter of Transmittal (LT) and the IUID Marking Plan via e-mail to the following e-mail addresses:

heather.baker.3@us.af.mil javad.refahiyat@us.af.mil

3. Blocks 8, 10, 11, 12, 13: The contractor shall deliver the IUID Plan as required NLT sixty (60) days after contract award. The Government will review and provide comments NLT ten (10) business days following receipt. The contract shall then have ten (10) business days to make correction(s) and resubmit.

4. Block 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

NSP

0.00

02/05/2020 02/25/2020

1 2

PINNEGAR.STEPH

ANIE.A.1102660737

Digitally signed by

PINNEGAR.STEPHANIE.A.1102660737

Date: 2020.02.05 10:39:48 -07'00'

BAKER.HEATHE

R.M.1394952660

Digitally signed by

Date: 2020.02.25 08:51:06 -07'00'

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

Page of Pages

B MGMT

Multiplier Assembly FD2020-21-00008

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

A MGMT

Multiplier Assembly FD2020-21-00008

A001 Commercial Asset Visibility (CAV) Reporting End Item Reporting

DI-MGMT-81838 PWS Paragraph: 3.1 416 SCMS/GUMAD

A N/A

SEE BLK 16

416 SCMS/ 1

GUMAD

6070 Gum Lane Bldg. 1213 Hill AFB, UT.

84056-5826

SEE BLK 16

0 1 0

NOTE: Changes to office symbols and/or e-mail addresses, when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Blocks 7, 8, 14:

a. The contractor shall report End Item transactional data through electronic submission in CAV AF using the CAV AF website or CICA XML.

b. The contractor shall submit a DD Form 250 (Material Inspection and Receiving Report) electronically via the Internet to iRAPT (WAWF) website address: https://wawf.eb.mil, using DODAAC FA8212. MARK FOR: Address in block 14A.

c. The contractor shall submit a Letter of Transmittal (LT) in the month the delivery order is completed, covering all reports transmitted for that order. The Letter of Transmittal (LT) shall be submitted via e-mail to the following e-mail address: 416SCMS.CDRL.Workflow@us.af.mil

2. Block 10: The Contractor reporting requirements to CAV AF shall be accomplished daily and/or within one (1) business day of a maintenance action IAW Contractor Users Guide.

3. Block 11: Data shall be current within one (1) business day of the last End Item maintenance occurrence and reflect an accurate representation/status of all assets at a contractor for repair.

4. Block 12: Date of first submission shall be within one (1) business day following a maintenance transaction after the contract award date and Government training as specified IAW CAV AF Users Guide.

5. Block 13: Date of subsequent submittal(s) shall be within one (1) business day of each End Item maintenance action/occurrence.

NSP

0.00

02/05/2020 02/25/2020

1 1

PINNEGAR.STEPHA

NIE.A.1102660737

Digitally signed by

PINNEGAR.STEPHANIE.A.110266

Date: 2020.02.05 10:02:56 -07'00'

BAKER.HEATHE

R.M.1394952660

Digitally signed by

Date: 2020.02.25 08:51:44 -07'00'

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

A PSSS

Multiplier Assembly FD2020-21-00008

A002 Contract Depot Maintenance (CDM) Production Report CDM Production Monthly Status Report

DI-PSSS-81995 PWS Paragraph 3.2 416 SCMS/GUMAD

N/A D

MTHLY

SEE BLK 16

416 SCMS/ 1

GUMAD

6070 Gum LN Bldg. 1213 Hill AFB, UT 84056-5825

SEE BLK 16

0 1 0

Note: Changes to office symbols and/or email addresses, when necessary shall be made by letter through the Government CO/ACO without further revision to this

CDRL.

1. Block 4: Format shall be provided in the format of Table I.

2. Block 7, 14: The Contractor shall submit a letter of transmittal (LT) and the CDM Production Monthly Status Reports via email to the following email addresses:

416SCMS.CDRL.Workflow@us.af.mil heather.baker.3@us.af.mil

3. Block 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

a. DISTRIBUTATION STATEMENT "D": Distribution authorized to the Department of Defense and U.S. DoD contractors only (Administrative or Operational Use. (July 2019). Other requests for this document shall be referred to (416 SMCS/GUMAD, Hill AFB, Ut. 84056-5826).

b. EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

NSP

0.00

02/05/2020 02/25/2020

1 2

PINNEGAR.STEPH

ANIE.A.1102660737

Digitally signed by

PINNEGAR.STEPHANIE.A.110266

Date: 2020.02.05 10:10:19 -07'00'

BAKER.HEATHE

R.M.1394952660

Digitally signed by

Date: 2020.02.25 08:52:23 -07'00'

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

Page of Pages

A PSSS

Multiplier Assembly FD2020-21-00008

EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended.

Violations of these export laws are subject to severe criminal penalties. Disseminate IAW provisions of DoD Directive 5230.25.

4. Blocks 10, 11, 12, 13:

a. The reports shall be provided monthly within 10 (Ten) business days of the previous month's last calendar date.

b. Reports shall continue to be submitted by the contractor unless the requirement is terminated by the 416 SCMS/GUMAD Logistic Management Specialist (LMS) or the Production Management Specialist (PMS).

c. The Final Report submitted following the final reporting period on the contract shall be annotated "Final Report".

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

A MGMT

Multiplier Assembly FD2020-21-00008

A003 Government Property Inventory Report Annual Government Property Physical Inventory Report

DI-MGMT-80441C PWS Paragraph: 3.3 416 SCMS/GUMAD

N/A D

ANNLY

SEE BLK 16

416 SCMS/ 1

GUMAD

6070 Gum LN Bldg. 1213 Hill AFB, UT 84056-5825

SEE BLK 16

0 1 0

NOTE: Changes to office symbols and/or e-mail addresses, when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 7, 14: The Contractor shall submit a letter of Transmittal (LT) and the Annual Government Property Physical Inventory Report via email to the following email addresses:

416SCMS.CDRL.Workflow@us.af.mil heather.baker.3@us.af.mil

2. Block 9: The Distribution Statement , Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

a. DISTRIBUTATION STATEMENT "D": Distribution authorized to the Department of Defense and U.S. DoD contractors only (Administrative or Operational Use). (Feb 2020). Other requests for this document shall be referred to 416 SMCS/GUMAD.

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate IAW provisions of DoD Directive 5230.25.

NSP

0.00

02/05/2020 02/25/2020

1 2

PINNEGAR.STEPH

ANIE.A.1102660737

Digitally signed by

PINNEGAR.STEPHANIE.A.110266

Date: 2020.02.05 10:19:17 -07'00'

BAKER.HEATHE

R.M.1394952660

Digitally signed by

Date: 2020.02.25 08:53:01 -07'00'

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

Page of Pages

A MGMT

Multiplier Assembly FD2020-21-00008

3. Blocks 10, 11, 12, 13:

a. This report will be provided annually. Reporting Period is one year.

b. The data is representative of the Contractor's Internal Property Control System and shall be current as the last day of the annual reporting period. If requested outside of an annual cadence, the data shall be current as of the date requested.

c. The report shall be delivered within seven (7) calendar days of the end of the first reporting period and annually thereafter, or within seven (7) calendar days of government request.

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

A MISC

Multiplier Assembly FD2020-21-00008

A004 Maintenance Data Collection Record (MDCR) Defense Repair Information Logistics System

DI-MISC-82003/T PWS Paragraph: 3.4 416 SCMS/GUMAD

N/A N/A

SEE BLK 16

416 SCMS/ 1

GUMAD

6070 Gum LN Bldg. 1213 Hill AFB, UT.

84056-5825

SEE BLK 16

0 1 0

NOTE: Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 4: See attached Defense Repair Information Logistics System (DRILS) Technician Guide for instruction.

2. Blocks: 7, 14: The contractor shall submit a Letter of Transmittal (LT) on the last day of the month in which transactions occurred, covering all reports transmitted electronically for the preceding month. The Letter of Transmittal (LT) shall be submitted via email to the following email address:

heather.baker.3@us.af.mil

3. Block 9: No Distribution Statement is required as data shall be entered into DRILS, a maintenance data database. Reference DRILS Field Technician Guide dated, 2003.

4. Blocks: 10,11,12,13:

a. Data Shall be generated by the contractor when maintenance is accomplished.

b. Data shall be entered into DRILS as the data is generated in real time.

NSP

0.00

02/05/2020 02/25/2020

1 1

PINNEGAR.STEPH

ANIE.A.1102660737

Digitally signed by

PINNEGAR.STEPHANIE.A.11026

60737 Date: 2020.02.05 10:23:22 -07'00'

BAKER.HEATHE

R.M.1394952660

Digitally signed by

Date: 2020.02.25 08:53:51 -07'00'

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

A MGMT

Multiplier Assembly FD2020-21-00008

A005 Item Unique Identification (IUID) Marking Activity, Validation and Verification Report

IUID Report

DI-MGMT-81804A/T PWS Paragraph: 3.7 416 SCMS/GUMAD

A D

SEE BLK 16

DCMA 1

SEE BLK 16

0 1 0

NOTE: Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 4: Contractor's format is acceptable using Microsoft Office 2013 compatible products (Word, Power point) or Adobe Portable Document Format

(PDF).

2. Blocks 7, 14:

b. DCMA inspector/acceptor may request a hard copy at the contractor's facility during the time of inspection and acceptance.

3. Blocks 8, 10, 11, 12, 13: First submission of the report due NLT ninety (90) calendar days after contract award and monthly thereafter. DCMA will review and provide comments in coordination with the F-16 AVIONICS Program Office NLT seven (7) calendar days following receipt. Final report is due NLT seven (7) business days after receipt and incorporation of DCMA comments.

4. Block 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

a. DISTRIBUTION STATEMENT "D": Distribution authorized to the Department of Defense and U.S. DoD contractors only (Administration or Operational Use). (FEB 2019). Other requests for this document shall be referred to (416 SCMS/GUMAD, Hill AFB, UT 84056-5826).

NSP

0.00

02/05/2020 02/25/2020

1 2

PINNEGAR.STEPHA

NIE.A.1102660737

Digitally signed by

PINNEGAR.STEPHANIE.A.110266

Date: 2020.02.05 10:44:57 -07'00'

BAKER.HEATHE

R.M.1394952660

Digitally signed by

Date: 2020.02.25 08:54:29 -07'00'

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

Page of Pages

A MGMT

Multiplier Assembly FD2020-21-00008

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

B001

B002

A001

A002

A003

A004

A005

File details come from the government source that posted it. Updated Mar 18, 2021.