CDRLFAT.pdf
PDF 930 KB Posted
- Attached to
- 1650-01-642-8153 Federal contract opportunity
- Solicitation number
- SPRHA1-23-Q-0765
- Issued by
- Defense Logistics Agency Aviation
About this file
This document is a Contract Data Requirements List (CDRL) outlining testing and inspection report requirements for a First Article item under Solicitation Number SPRHA1-23-Q-0765 issued by the Defense Logistics Agency Aviation. The CDRL requires the contractor to submit a report concurrently with the First Article item to assist in testing and acceptance by the Air Force. The report must include dimensions and tolerances of all parts with actual inspection readings, materials utilized and certification that they conform to requirements, identification and certification of material processing such as plating, heat treating, and finishing that conforms to standards, and any other details specified in the Technical Data Package. The distribution of the report is authorized to U.S. Government agencies only for test and evaluation purposes until June 21, 2021, with any other requests referred to the 417th Supply Chain Management Squadron. The reports shall be submitted by January 17, 2023 initially and for any subsequent items.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| MQR.pdf | ||
| EDL.pdf | ||
| SOW.pdf | ||
| SPRHA123Q0765 CUI.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE J. DATE
Page of Pages
A
First Article
1. DATA ITEM NO.
Test/Inspection Reports Government Testing
DI-NDTI-80809B 417 SCMS/CL
LT
B
Per contract reqs
Per contract reqs
Preferred method of 1
0 1 0
1. BLOCK 4: Contractor format acceptable. Paragraph 10.2.3.3 of DI-NDTI-80809B is clarified as follows:
a. All dimensions and tolerances specified on the manufacturing data shall be listed in one column with the actual corresponding reading obtained from the inspection of the parts listed in another column.
b. Materials utilized in the manufacture of the "First Article" item shall be identified and certified along with a copy of material purchase requests as conforming to applicable data requirements.
c. Material processing, including finish requirements (plating, heat treatment, welding, inspecting, anodize, painting, etc.) utilized in the manufacture of the "First Article" item shall be identified and certified as conforming to applicable requirements. A copy of the purchase order certifying the process accomplished at other than contractor facility shall be included.
d. Other requirements as called out with the Technical Data Package.
2. BLOCK 9: Distribution authorized to U.S. Government Agencies only, test and evaluation, 21 Jun 2021. Other requests for this document shall be referred to 417
SCMS.
3. BLOCKS 10, 11, 12, and 13: Report to assist in the "First Article" testing by the Air Force shall be submitted concurrently with the "First Article" item.
FOB: DESTINATION
INSPECTION/ACCEPTANCE: DESTINATION
NSP
0.00
Lori Grygier Lead IM, 417 SCMS/GUMD
1 1 shipping to include test report in First Article container:
FB2029
809 MXSS/MXDEB
Bldg. 849 Attn:
Non Accountable Bay Hill AFB, UT 84056-5713
01/17/2023 01/17/2023
MARTIN.BRAD
.H.1256609564
Digitally signed by
MARTIN.BRAD.H.1256609564
Date: 2023.01.17 13:56:12 -07'00'
| Text1: FD202022300765 |
| Text2: A001 |
| Text3: |
| Text4: |
File details come from the government source that posted it. Updated .