CDRL.pdf

PDF 143 KB Posted

Attached to
Piston Rod Assembly Federal contract opportunity
Solicitation number
SPRHA2-22-R-0078
Issued by
Defense Logistics Agency Aviation

About this file

This Contract Data Requirements List (CDRL) outlines testing and inspection reporting requirements for a piston rod assembly to be procured under solicitation number SPRHA2-22-R-0078 by the Defense Logistics Agency Aviation. Key requirements include the contractor submitting measurement data no later than 45 days after work completion for government review and approval. The contractor must then submit any revised qualification test reports incorporating government comments within 15 days of receipt. Distribution of the test inspection report is restricted to the Department of Defense and U.S. DoD contractors for administrative and operational use. The contractor shall identify material processing and certify conformity to requirements.

View the file

Other files for this federal contract opportunity

Other files attached to Piston Rod Assembly, newest first.
File Type Posted
SPRHA222R0078_______0004.pdf PDF
SPRHA222R0078_______0002.pdf PDF
SPRHA222R0078_______0001.pdf PDF
SPI.pdf PDF
SOW.pdf PDF
SPRHA222R0078.pdf PDF
EDL.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

data_item: 1
title: TEST INSPECTION REPORT
sub: PISTON ROD ASSY
auth: DI-NDTI-80809B
ref:
req_ofc: 414 SCMS GUEAB
dd250: SD
appcode: A
dist: D
freq: ASREQ
asof: SEE BLK 16
firstsub: SEE BLK 16
subsub: SEE BLK 16
addressee1:
draft1:
reg1:
repro1:
addressee2:
draft2:
reg2:
repro2:
addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0
total_reg: 0
total_repro: 0
remarks: BLOCK 4: PARAGRAPH 10.2 OF DI-NDTI-80809B CLARIFIED AS FOLLOWS:

A. ALL DIMENSIONS AND TOLERANCES SPECIFIED ON THE MANUFACTURING DATA SHALL BE LISTED IN ONE COLUMN, WITH THE ACTUAL CORRESPONDING READING OBTAINED FROM THE INSPECTION OF THE PART LISTED IN ANOTHER COLUMN.

B. MATERIAL PROCESSING, INCLUDING FINISH REQUIREMENTS (PLATING, HEAT TREATMENT, WELDING ANODIZING, PAINTING, ETC.) UTILIZED IN THE MANUFACTURE OF “FIRST ARTICLE” ITEMS SHALL BE IDENTIFIED, AND CERTIFIED AS CONFORMING TO APPLICABLE REQUIREMENTS. A COPY OF THE PURCHASE ORDER CERTIFYING THE PROCESS ACCOMPLISHED AT OTHER THAN CONTRACTOR FACILITY SHALL BE INCLUDED.

BLOCK 9:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY FOR ADMINISTRATIVE AND OPERATIONAL USE DETERMINED [DATE OF DOCUMENT]. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO ICBM SYSTEMS DIRECTORATE, 6014 DOGWOOD AVE BLDG 1258, HILL AFB, UT 84056-5826.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. 2751 ET SEQ.) OR THE EXPORT ADMINISTRATIVE ACT OF 1979, AS AMENDED, TITLE 50, U.S.C., APP. 2401, ET SEQ. VIOLATION OF THESE EXPORT-CONTROL LAWS IS SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATION OF THIS DOCUMENT IS CONTROLLED UNDER DODD 5230.25 AND AFI 61-204.

DESTRUCTION NOTICE: FOR CLASSIFIED DOCUMENTS, FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM REGULATIONS, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

group: NSP
total_price: 0.00
prep_name: Richard Howe
line_item: 0001
exhibit: A
xtdp: Off
xtm: Off
othercat: X
system: ICBM/ NIIN 010078003
ctr_no: FD 20202200078
contr:
remarksb: BLOCK 10, 11, 12 & 13 INITIAL SUBMITTAL:

CONTRACTOR SHALL SUBMIT MEASUREMENT DATA NLT 45 DAYS AFTER COMPLETION OF WORK. GOVERNMENT WILL BE ALLOWED 30 DAYS AFTER RECEIPT FROM CONTRACTOR TO REVIEW FOR APPROVAL/ DISAPPROVAL/COMMENTS. CONTRACTOR SHALL SUBMIT REVISED QUALIFICATION TEST REPORT INCORPORATING GOVERNMENT COMMENTS, IF APPLICABLE, NLT 15 DAYS AFTER RECEIPT FROM GOVERNMENT.

BLOCK 14: COMPLETE MAILING ADDRESS IS:

414 SCMS RICH HOWE

6031 GUM LANE

BLDG 1227

HILL AFB UT 84056

POC: RICH HOWE Cell Phone 801-391-1471 Office Phone 801-586-5998

Page2: 2
Reset:
2021-12-08T10:29:41-0700
HOWE.RICHARD.W.1574025490
prep_date: 20211208
app_by: David Tippy, 414 SCMS/GUMBB
2021-12-09T07:17:27-0700
TIPPY.DAVID.JANSON.1153947690
app_date: 20211209
Page: 1
of_pages: 2
app: Adobe Professional 8.0

File details come from the government source that posted it. Updated .