C05__Attachment_1_Specifications_and_Photos.pdf

INLET

23 27*

24*

31*

26*

26*

25*

17 20

29*

31*

28*

30*

A

A

SECTION THRU INLET COVER

1124*

26*26*

30*

15 25*

SECTION A-A

IN-PROCESS

INSPECTION

NOTES:

* INDICATES RECOMMENDED SPARE PARTS.1.

RH UNIT SHOWN, LH UNIT AVAILABLE2.

DESIGN PRESSURE: 100 PSI3.

DESIGN TEMPERATURE: 150 F4.

THIS DRAWING IS A CONSOLIDATION OF DRAWING NO. 5.

110314 AND DRAWING NO. 110314-M75 WITH ADDITIONAL

INFORMATION.

ALL FLANGES ARE FURNISHED UNDRILLED UNLESS SPECIFIC 6.

DRILLING INSTRUCTIONS ACCOMPANY ORDER.

DRILLING: WHEN SPECIFIED ON ORDER, FLANGES ARE 7.

DRILLED IN ACCORDANCE WITH ASME B16.1 CLASS 125.

ALL DIMENSIONS ARE SUBJECT TO MANUFACTURING 8.

TOLERANCES AND ARE FOR REFERENCE ONLY.

REVISIONS

ZONE REV. DESCRIPTION REVISED BY APPROVED DATE

ITEM

NO. QTY. DRAWING

NUMBER DESCRIPTION

50 6 P22C20 SCREW, DRIVE #4 X 1/4" RD HD

49 1 110-1 IDENT PLATE (INLET)

48 1 109-1 IDENT PLATE

47 2 P10N12 EYEBOLT, 1/2-13X.81 PLAIN

46 2 P40F14 PIPE PLUG, 3/4 NPT, SQ HD

45 2 1-240 VALVE. PETCOCK, BRASS 3/8" NPT

44 2 1-241 VALVE, PETCOCK 1/8" NPT

43 4 P36A36 PIN, COTTER 3/32'' DIA X 1.00''

42 18 P21Q204 SCREW, SET=3/4"-10 X 3-1/2", SQ HD, OVAL

41 30 P10R96 SCREW, CAP, REG. HEX, 3/8''-16X1-1/4''

40 38 P11H18 NUT, HVY. HEX, 7/8''-9

39 8 P11H16 NUT, HVY. HEX, 5/8''-11

38 28 P10H343 SCREW, CAP, HVY. HEX, 7/8''-9X4-1/4''

37 8 P10H335 SCREW, CAP, HVY. HEX, 7/8''-9X2-1/4''

36 8 P10H333 SCREW, CAP, HVY. HEX, 7/8''-9X1-3/4''

35 4 P10H257 SCREW, CAP, HVY. HEX, 5/8''-11X1-1/2''

34 8 P50Q620 STUD, 7/8''-9 X 4.00''

33 4 P50Q423 STUD, 5/8''-11 X 4-3/4''

32 2 P37A21 KEY-.19" X 1.00 (608) WOODRUFF

31* AR 1-630 PACKING, 3/8 SQ

30* AR 1-626 PACKING, 1/8 SQ

29* 2 141606-1 GASKET, COVER PLATE

28* 2 141605-1 GASKET, COVER

27* 2 133225-10 GASKET, DOOR

26* 4 P59T519 GASKET, GLAND

25* 2 P59T511 GASKET, PACKING BOX

24* 2 P27R712 RING, DISC

23 12 P36R513 PIN

22 12 P536Z9001 STRAP, HINGE

21 2 140377-1 PLATE, COVER

20 2 141304-1 INDICATOR GUIDE

19 6 5839-1 DOOR STRAP

18 2 P36S9050 PIN, HINGE

17 2 141302 INDICATOR

16 2 140270-1 GLAND, INDICATOR

15 2 140269-1 PACKING BOX

14 8 M36N217 PIN, WEDGE SHOE

13 8 P21Z9025 SCREW, WEDGE SHOE

12 8 15-61 WEDGE SHOE

11 2 2220-8 NUT, VALVE

10 2 6637-I-160 VALVE SCREW ASSY

9 2 P38A100 HANDLE

8 2 503-K-1 HANDWHEEL

7 2 5838-I-1 SCREW PLUG

6 2 5836-1 DOOR

5 2 513-1 GLAND

4 2 508-1 PACKING BOX

3 2 2219-1 VALVE DISC

2 2 13762-1 COVER

1 1 13767-1 BODY

CAGE NO.

THIS DRAWING IS THE PROPERTY

OF TATE ANDALE.

ALL USE IS FORBIDDEN

EXCEPT BY WRITTEN CONSENT

DO NOT SCALE DRAWING

DRAWN:

CHECKED:

DATE

APPROVED:

APPROVALS

DWG.NO.

09032

SIZE

SHEET:

REV.9/3/21

9/9/21

EST. WEIGHT :

LBS.

1 OF 21284.45MATERIAL:9/9/21

JDT

RIH

DFH

D 110314-10

1941 LANSDOWNE ROAD, BALTIMORE,MD 21227

Tate Andale

10" R DUPLEX STRAINER

ASSEMBLY

MADE FROM- SEE BOMREF DWG-110314 / 110314-M75CAD MODEL-110314-10

ALL DIMENSIONS

REFERENCE UNLESS

OTHERWISE SPECIFIED.

A A

B B

C C

D D

E E

F F

38.00

19.00

16 227

26.00

APPROX. HEIGHT

TO REMOVE BASKET

OUTLET

INLET

REVISIONS

ZONE REV. DESCRIPTION REVISED BY APPROVED DATE

- - SEE SHEET1 - - -

CAGE NO.

THIS DRAWING IS THE PROPERTY

OF TATE ANDALE.

ALL USE IS FORBIDDEN

EXCEPT BY WRITTEN CONSENT

DO NOT SCALE DRAWING

DRAWN:

CHECKED:

DATE

APPROVED:

APPROVALS

DWG.NO.

09032

SIZE

SHEET:

REV.9/3/21

9/9/21

EST. WEIGHT :

LBS.

2 OF 21284.45MATERIAL:9/9/21

JDT

RIH

DFH

D 110314-10

1941 LANSDOWNE ROAD, BALTIMORE,MD 21227

Tate Andale

10" R DUPLEX STRAINER

ASSEMBLY

MADE FROM- SEE BOMREF DWG-110314 / 110314-M75CAD MODEL-110314-10

ALL DIMENSIONS

REFERENCE UNLESS

OTHERWISE SPECIFIED.

A A

B B

C C

D D

E E

F F

VOLUME 2 - CATALOG

DUPLEX/TWIN BASKET STRAINERS

Description Tate Andale Model R and S twin strainers differ from the other twin strainers in the Tate Andale product line in their basic design. The Model R and S units feature bodies with a low profile. Straining baskets are mounted parallel to the pipeline with relatively straight line fluid flow through the strainer.

The Model R strainers are available in sizes 4” thru 36”. Maximum operating pressure for units thru 16” size is 100 PSIG. The 20” and 24” units are designed for 50 PSIG. The 30” and 36” units are designed for 125 PSIG working pressure and are furnished with electric motor valve operators featuring torque control to insure positive valve seating.

The Model S strainer incorporates all design features of the Model R plus increased basket area. The Model S features multiple baskets in each cham-ber which yield basket areas that dou-ble the baskets areas of the Model R.

Typical Strainer Specification The strainer shall be a gate valve twin basket type, capable of handling _________ (fluid) at a flow rate of ___ GPM with an approximate pressure drop (clean) of ____ PSIG. The strainer shall be Model R (S) as manufactured by Tate Andale, Inc. and suitable to a working pressure of ____ PSI and a working temperature of ____ ºF.

The strainer body shall be cast iron construction with ____” flanged inlet and outlet connections and shall have a multiple yoked access cover.

The body shall be a low profile design with floating valve discs, wedge-action seating with instant release before valve moves to eliminate scoring.

Tate Andale Model R and STwin Basket Strainers

MODELS R & S TWIN STRAINERS

PRESSURE DROP CURVES

(3/16” PERFORATIONS)(WATER)

4”

5.0 4.0

3.0

2.0

1.5

1.0 0.9 0.8 0.7 0.6 0.5 0.4

0.3

0.2

P R

E S

S U

R E

D R

O P

P.

S

.I.

6” 8” 10” 12” 14” 16” 20” 24” 30” 36”

FLOW G.P.M.

VOLUME 2 - CATALOG

DUPLEX/TWIN BASKET STRAINERS

The cover shall be a hinged type with multiple yokes.

The two strainer baskets shall be of 304 Stainless Steel construction with ___ inch diameter perforated openings.

Standard Materials Body, valve housings, valve discs and access covers..............Cast Iron Valve Screws (thru 24”).....................Brass Valve Screws (30” & 36”)..................304 Stainless Steel Valve Ring....................Rubber Basket ...........................304 Stainless Steel

Standard Features

• Gate type valves with floating valve discs

• Wedge-action seating of valves, with instant release before valve moves, eliminates scoring while perpendicular seating provides positive seal

• Positive external valve position indicators

• Non-rising stem (thru 24”)

• Easily replaceable valve stem packing

• Right or left hand assembly

• Air vents included on access covers

• Equalizing and drain connections on each chamber (pipes, fittings and valves by purchaser)

• All wearing parts replaceable without removing strainer from line, except 4” size

• Electric motor driven valve operators (30” & 36”) available by special order only

Optional Features

• Chain drive (handwheels interlocked)

• Equalizing pipe, fittings and valves

• Zinc anodes for salt water

• Increased straining ratio (type S)

• Monel or 316 Stainless Steel baskets

Model R and S Dimensions (Approx.) 125 PSIG

SIZE 4" 6" 8" 10" 12" 14" 16" 20" 24" 30" 36"

A 241⁄8 295⁄8 341⁄8 377⁄8 431⁄2 471⁄8 541⁄8 70 855⁄8 105 120

B 135⁄16 181⁄4 201⁄2 235⁄8 2613⁄16 305⁄16 335⁄16 395⁄16 447⁄8 1111⁄4 1421⁄2

C 113⁄4 1313⁄32 1525⁄32 1811⁄16 211⁄16 247⁄16 277⁄16 337⁄16 391⁄2 447⁄8 601⁄16

D 101⁄2 135⁄8 161⁄8 185⁄8 203⁄4 25 281⁄4 321⁄2 373⁄4 481⁄2 65

E 18 215⁄16 253⁄8 2613⁄16 313⁄4 3413⁄16 335⁄8 427⁄16 50 64 84

350 650 1000 1500 2100 3100 4000 5900 8850 24000 38000WEIGHT

(lbs.)

Tate Andale Model R and STwin Basket Strainers

PHOTOS