Breast plates and Waist plates PD.pdf

PDF 272 KB Posted

Attached to
BREAST PLATES & WAIST PLATES-SOURCES SOUGHT Federal contract opportunity
Solicitation number
W911SD23Q0003
Issued by
Department of the Army Materiel Command Mission and Installation Contracting Command Fort Eustis

About this file

Written by GovTribe AI ·

This sources sought notice seeks information from potential offerors for a requirement to supply 2100 breast plates and 1860 waist plates to the Department of Logistics & Readiness Center at the United States Military Academy at West Point, New York. The government intends to set aside this requirement for small businesses provided two or more qualified small businesses respond with pricing and capability information. Interested parties should provide company and small business program information, details on relevant past performance as a prime or subcontractor, commercially available pricing for the items, and recommendations to improve the acquisition approach. Responses are due to Maureen Flanagan at the MICC-WP by the contact information provided.

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AMSC N/A Page 1 of 2 FSC 8455

INCH-POUND

MIL-DTL-1563/12B

6 January 2014

SUPERSEDING

MIL-B-1563/12A

30 April 1997

DETAIL SPECIFICATION SHEET

INSIGNIA, U.S.M.A., BUCKLE, WAISTPLATE

This specification is approved for use by all Departments and Agencies of the Department of Defense

The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-B-1563.

DASH NO.

-1: Top -2: Bottom

MATERIAL: Yellow Brass 65/35 (UNS Alloy C-268)

FINISH: Mirror-like Polish Fronts, Matte Finish back and edges.

MARKING FOR IDENTIFICATION: Back of buckle

Source: https://assist.dla.mil -- Downloaded: 2015-01-21T21:17Z Check the source to verify that this is the current version before use.

MIL-DTL-1563/12B

DIMENSIONS:

HEIGHT:

-1: 2-3/16 inches + 1/64 inch (REF) -2: 2-7/32 inches+ 1/64 inch (REF)

WIDTH

-1: 3 inches + 1/64 inch (REF) -2: 1-5/8 inches + 1/64 inch (REF) THICKNESS: 0.080 inch + 0.002 inch

SUGGESTED PACKAGING: Standard Commercial:

1. UNIT PACKAGING: Each wrapped.

2. INTERMEDIATE PACKAGING: 50 waistplates per box.

WAISTPLATE:

1. Waistplates shall conform to the dimensions shown.

2. -1 shall be dapped to radius of 3-1/2 inches + 1/2 inch along the horizontal plane.

NOTE:

The term (REF) refers to measurements taken from the Government furnished hub or die.

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

Custodian: Preparing activity:

Army - IH Army - IH

Review activity: (Project No. 8455-2014-014)

DLA - CT

NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.

Source: https://assist.dla.mil -- Downloaded: 2015-01-21T21:17Z https://assist.dla.mil/

AMSC N/A Page 1 of 2 FSC 8455

INCH-POUND

MIL-DTL-1563/13B

6 January 2014

SUPERSEDING

MIL-DTL-1563/13A

30 April 1997

DETAIL SPECIFICATION SHEET

INSIGNIA, U.S.M.A., BUCKLE, BREASTPLATE

This specification is approved for use by all Departments and Agencies of the Department of Defense

The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-B-1563.

MATERIAL: Yellow Brass 65/35 (UNS Alloy No. C-268)

FINISH: Mirror-like Polished Fronts, Matte Finish Back and Edges

MARKING FOR IDENTIFICATION: Back of Buckle

DEMENSION:

HEIGHT: 2-5/16 inches + 1/64 inch (REF) WIDTH: 2-7/16 inches + 1/64 inch (REF) THICKNESS: 0.050 inch + .002 inch

Source: https://assist.dla.mil -- Downloaded: 2015-01-21T21:00Z

MIL-DTL-1563/13B

SUGGESTED PACKIGING: Standard Commercial UNIT PACKAGING: Each Wrapped.

INTERMEDIATE PACKAGING: 50 Breastplate per box.

BREASTPLATE:

1. Breastplate shall conform to the design and dimensions shown.

2. Breastplate shall be dapped as shown.

NOTE:

The term (REF) refers to the measurements taken from the Government furnished hub or die.

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

Custodian: Preparing activity:

Army - IH Army - IH

Review activity: (Project No. 8455-2014-015)

DLA - CT

NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.

Source: https://assist.dla.mil -- Downloaded: 2015-01-21T21:00Z https://assist.dla.mil/

MIL-DTL-1563 12B WAIST PLATE
MIL-DTL-1563 13B BREAST PLATE

File details come from the government source that posted it. Updated .