Brand name justification_Redacted.pdf

2 | 5

2. Regulatory Authority Permitting Other Than Full and Open Competition.

SAM

FAR 13.106-1(b)(i) Soliciting from a single source

FAR 13.106-1(b)(ii) Particular brand-name item

GSA

FAR 8.405-6(a)(i)(1)(A) An urgent and compelling need exists

FAR 8.405-6(a)(i)(1)(B) Only one source is capable of providing the supplies or services required at the level of quality required because the supplies or services are unique or highly specialized

FAR 8.405-6(a)(i)(1)(C) In the interest of economy and efficiency, the new work is a logical follow-on to an original Federal Supply Schedule order provided that the original order was placed in accordance with the applicable Federal Supply Schedule ordering procedures (the original order or BPA must not have been previously issued under sole-source or limited-sources procedures).

FAR 8.405-6 (b) Items peculiar to one manufacturer (brand-name item) ID/IQ Task Order/Delivery Order (e.g. NASA SEWP or ARMY CHESS)

FAR 16.505(b)(2)(i)(A) The agency need for the supplies or services is so urgent that providing a fair opportunity would result in unacceptable delays.

FAR 16.505(b)(2)(i)(B) Only one awardee is capable of providing the supplies or services required at the level of quality required because the supplies or services ordered are unique or highly specialized

FAR 16.505(b)(2)(i)(C) The order must be issued on a sole-source basis in the interest of economy and efficiency because it is a logical follow-on to an order already issued under the contract, provided that all awardees were given a fair opportunity to be considered for the original order. [When utilizing this exception, the rationale shall describe why the relationship between the initial order and the follow-on is logical (e.g., in terms of scope, period of performance, or value).]

FAR 16.505(b)(2)(i)(D) It is necessary to place an order to satisfy a minimum guarantee.

FAR 16.505(b)(2)(i)(E) For orders exceeding the simplified acquisition threshold, a statute expressly authorizes or requires that the purchase be made from a specified source.

FAR 16.505(b)(2)(i)(F) In accordance with section 1331 of Public Law 111-240 ( 15 U.S.C.

644(r)), contracting officers may, at their discretion, set aside orders for any of the small business concerns identified in 19.000(a)(3). When setting aside orders for small business concerns, the specific small business program eligibility requirements identified in part 19 apply.

FAR 16.505(b)(2)(i)(G) For DoD, NASA, and the Coast Guard, the order satisfies one of the exceptions permitting the use of other than full and open competition listed in 6.302 ( 10 U.S.C.

3406(c)(5)). The public interest exception shall not be used unless Congress is notified in accordance with 10 U.S.C. 3204(a)(7).

3 | 5

3. Rationale Justifying Use of Cited Regulatory Authority.

a.) The Items Described in Paragraph 1 Must Be Compatible In All Aspects

(Form, Fit And Function) With Existing Systems Presently Installed.

b.) A Patent, Copyright, or Proprietary Data Limits Competition.

c.) The Items Described in Paragraph 1

Parts/Components for Existing Equipment.

d.) Foreign Military Sales (FMS) Supported By A Case Letter.

e.) Unusual and Compelling Urgency.

f.) Other: If required, discuss any other rationale that supports the use of a brand name/sole source for this effort.

This equipment is required to utilize the ULM 300 to higher capacity based on the

Height Measuring Instrument, Digimar 817 CLT is required to test various equipment used on ships and lab.

This equipment directly form, fit and function with the calibration lab performing their daily activity to calibrate equipment that supports the ships and their personnel. Procuring another brand will not be compatible with the existing ULM 300.

. are provided for procurement of calibration standards and equipment for the Standards Calibration Center . List of equipment are listed under approved Requirements Definition Form (RDF)

. The subject standard item requested is used for the calibration of universal length measuring instruments, which are comparators with horizontal base bed .