Brand Name and Sole Source Justification Redact.pdf

JUSTIFICATION FOR DOCUMENT NUMBER:

(Simplified Acquisitions <$150K)

NAVSUPINST 4200.85D, ENCL [1]

The service or material listed herein is sole source and competition is precluded for reasons indicated below. There are no substitutes available for this material or service.

Restricted to the following source. Provide manufacturer/vendor name. (If sole source manufacturer distributes via dealers, also provide dealer information.)

1. MANUFACTURER 8. DEALER REPRESENTATIVE

2. POINT OF CONTACT 3. PHONE NUMBER 9. POINT OF CONTACT 10. PHONE NUMBER

4. STREET 11. STREET

5. CITY 6. STATE 7. ZIP CODE 12. CITY 13. STATE 14. ZIP CODE

15. ESTIMATED COST 16. REQUIRED DELIVERY DATE 17. STATUTORY AUTHORITY CITED

18. REQUIRED - DESCRIPTION OF THE ITEM OF SERVICE REQUIRES

19. REQUIRED - SPECIFIC CHARACTERISTICS OF THE MATERIAL OR SERVICE THAT LIMIT THE AVAILABILITY TO A SOLE SOURCE [UNIQUE FEATURES, FUNCTION OF THE ITEM, ETC.]. DESCRIBE IN DETAIL WHY ONLY THIS SUGGESTED SOURCE CAN FURNISH THE

REQUIREMENTS TO THE EXCLUSION OF OTHER SOURCES

20. IF APPLICABLE – THE REQUESTED MATERIAL OR SERVICE REPRESENTS THE MINIMUM REQUIREMENTS OF THE GOVERNMENT.

[IF CHECKED, ENTER EXPLANATION OR MINIMUM REQUIREMENTS BELOW]

21. These are direct replacement parts or components for existing equipment (Check if applicable)

NAVSUPINST 4200.85D, ENCL[1] FRONT

BRAND NAME

20978850-8852

EATON-AEROQUIP

30 SEP 2022 SAP NON-COMPETITION [FAR 13.106-1(b)]

FT1211-LM-2-4 Enhanced Dogleg Assy Machine 230/460 Volt, 3-Phase, Chain driven Two-speed, 1st Gear RPM output 14.9 ft lbs, 2nd Gear RPM output 29.8; Baldor 2.0hp, 1725 RPM Electric Motor with electric brake, Spindle Thru-hole 9.75" FT1211-200-1 Flat Insert FT1211-100-1 Large Insert FT1211-150-1 Large Cutaway Insert FT1211-100-2 Small insert at full length FT1211-150-2 Small cutaway insert FT1211-500 Operator Manual Hard Copy FT1211-2-1 Potchuck FT1211-2-3 Face Plate

The FT1211-LM-2-4 is the successor machine to the FT1211 and FT1211A. It is the only FT1211 currently active. It is manufactured by Lomar Machine & Tool Company under agreement with Aeroquip. Lomar has always been the manufacturer of the FT1211 Dogleg Machine.

JUSTIFICATION FOR DOCUMENT NUMBER:

(Simplified Acquisitions <$150K)

NAVSUPINST 4200.85D, ENCL [1]

22. IF APPLICABLE – THE MATERIAL OR SERVICE MUST BE COMPATIBLE IN ALL ASPECTS (FORM, FIT, FUNCTION) WITH EXISTING SYSTEMS PRESENTLY INSTALLED/PERFORMING. DESCRIBE THE EQUIPMENT/FUNCTION YOU HAVE NOW AN HOW THE NEW ITEM OR

SERVICE MUST COORDINATE, CONNECT, OR INTERFACE WITH THE EXISTING SYSTEM

23. IF APPLICABLE – A PATENT, COPYRIGHT, OR PROPRIETARY DATA LIMITS COMPETITION. THE PATENT, COPYRIGHT, OR

PROPRIETARY DATA IS:

24. OPTIONAL - OTHER INFORMATION TO SUPPORT A SOLE SOURCE BUY:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE

SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN COMPETITION.

Signature: Title:

Activity: Date:

Contracting Officer Signature: ______________________________________

Date: ____________________________

SAP Sole Source

NAVSUPINST 4200.85D, ENCL[1] BACK

BRAND NAME

The FT1211-LM-2-4 is the successor machine to the FT1211 and FT1211A. It is the only FT1211 currently active. It is manufactured by Lomar Machine & Tool Company under agreement with Aeroquip. Lomar has always been the manufacturer of the FT1211 Dogleg Machine.

20978850-8852