BAG REQUIREMENTS.doc

DOC document 26 KB Posted

Attached to
GRIT 16-30 Federal contract opportunity
Solicitation number
SPMYM4-20-Q-0179
Issued by
Defense Logistics Agency Land and Maritime

View the file

Other files for this federal contract opportunity

Other files attached to GRIT 16-30, newest first.
File Type Posted
SPMYM4-20-Q-0179.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

ABRASIVE GRIT BAG SPECIFICATIONS:

· FOR USE WITH: GRIT, SANDBLAST, KLEEN BLAST #35, MEDIUM/FINE GRIT, MIL-A-22262B, 2000 LBS/1 TON, 5:1 SAFETY FACTOR.

· TUBULAR DESIGN.

· 220 GSM UNCOATED FABRIC, UV TREATED.

· 4/10” ABOVE BAG WHITE PICK-UP POINT LOOPS.

· 14 X 18 INLET SPOUT WITH WEB TIE.

· 1.5” WHITE PICK-UP POINT PERIMETER BAND.

· 10 X 20 OUTLET SPOUT W/ STAR CLOSURE.

· STAR CLOSURE HAS PROTECTIVE FLAP CORD ROPE.

· 4.0 MIL LLDPE LINER ATTACHED WITH 8 TABS.

· LARGE ROPE LOCK ON OUTER CLOSURE.

· (2) 12 X 12 ZIP LOCK POUCHES SEWN IN TOP SEAM, (SAME SIDE AS PRINTED COMPANY LOGO, IF LOGO IS PRINTED ON BAG). DO NOT COVER PRINTED INFO.

· ADDITIONAL MARKING REQUIREMENTS, EACH SACK SHALL BE MARKED WITH THE FOLLOWING INFO:

1) STOCK NUMBER: 5350-HM-CN1-4664

2) BATCH OR LOT NUMBER (CERTIFICATES OF CONFORMANCE SENT WITH ALL BATCHES/LOTS RECEIVED SHALL MATCH).

NOTE: VENDOR TO INSERT A PIECE OF FIBERBOARD OR PLYWOOD BETWEEN THE BAGS AND PALLETS AT ANY CONTACT POINTS. THIS PREVENTS FORKS OR PALLETS FROM PUNCTURING THE SURROUNDING BAGS. EXERCISE CAUTION IF STACKING FOR SHIPMENT, USING PROPER DUNNAGE AND SHORING.

**FOR SIZE OF BAG DENSITY WILL NEED TO BE CALCULATED**

File details come from the government source that posted it. Updated .