B9 N3220522Q2105.docx

MILITARY SEALIFT COMMAND

N10 - CONTRACTS AND BUSINESS MANAGEMENT DIRECTORATE

COMBINED SYNOPSIS/SOLICITATION

Military Sealift Command Combined Synopsis and Solicitation Notice Information

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

2. Solicitation number is N3220522Q2105 and is being issued as a Request for Quotes (RFQ).

3. The solicitation document and incorporated provisions and clauses are those in effect through:

a. Federal Acquisition Circular (FAC) 2022-06, effective 05/01/2022, located on https://www.acquisition.gov/browse/index/far

b. DFARS Publication Notice 20220428, effective 04/28/2022 located at https://www.acq.osd.mil/dpap/dars/dfarspgi/current/

4. The associated NAICS code is 811310 and the associated PSC/FSC code is J020 for this procurement: NOTE: A Class Waiver is not applicable to a procurement unless the NAICS code, PSC/FSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured.

|X| is not being set-aside for small businesses.

|_| is being set-aside for The small business size standard is $8M

5. The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options:

6. It is anticipated one firm-fixed price purchase order will be issued in response to this RFQ. No commercial financing. This item describes the requirement to provide the services of an OEM authorized Repair Facility to accomplish the refurbishment of the Force Protection Boat Davit onboard the USNS Comfort (T-AH 20). The Period of Performance will be time of award to 31 August 2022, at the contractor’s facility.

This is an OEM, DMW Marine Group, service requirement. Quotes will only be accepted from OEM-authorized service technicians and technical representatives. Quotes shall include documentation of proper training and authorization from the OEM asserting their qualification to perform Maintenance and Repair work on the designated equipment.

7. The required delivery is FOB Destination and acceptance date is 31 August 2022. Delivery and acceptance will occur at Contractor’s Facility.

8. The provision at FAR 52.212-1, Instructions to Offerors – Commercial applies to this acquisition and is incorporated by reference. The provision is amended as follows:

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

a. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1.

b. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate.

c. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and “quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order.

d. The Government will consider all quotes that are timely received and may consider late quotes in accordance with 52.212-1. Failure of a quote to address any items listed in the attached submission package may make a quote unacceptable.

e. Paragraph (b) of FAR Provision 52.212-1, Submission of Offers, is amended as follows:

1. Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price

2. Total Firm Fixed price

3. Any Discount Terms

4. Estimated time of delivery

5. Technical Submission Requirements

a. For a Services buy, the quote shall contain all pre-award submission/certification requirements as defined in the statement of work (SOW).

6. Indicate principal place of performance and country of product origin.

7. Responses to the solicitation are due 18 May 2022 at 11AM EST. Quotes may be e-mailed to Tiffany Allen at tiffany.l.allen21.civ@us.navy.mil. To be considered timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission. Quotes received after that time will be considered at the Government’s sole discretion. Please reference the solicitation number on your quote.

9. Provision 52.212-2 Evaluation—Commercial Items applies to this acquisition.

(a) The Government may issue a purchase order resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quote:

(i) technical capability of the item quoted to meet the Government requirement;

(ii) price;

Award shall be made to the lowest priced technically acceptable quoter. Award shall be made to DMW Marine Group as the sole source vendor by providing a technically acceptable quote at a fair and reasonable price.

To be considered a technically acceptable solution for a parts procurement, the quoted parts shall meet the solicitation requirements including required parts, delivery dates, and terms and conditions stated in the solicitation. To be considered a technically acceptable solution for a service, the quoted service shall meet the solicitation requirements including terms and conditions stated in the solicitation. The quote shall state that all aspects of the technical requirement, including required delivery date and part numbers, can be met.

The Government will evaluate quoted pricing for reasonableness utilizing techniques described in FAR 13.106-3.

(c) To consummate a binding contract between the parties, the successful quoter shall accept the purchase order in writing (see FAR 2.101).

(End of Provision)

10. Provision FAR 52.212-3, Offeror Representations and Certifications – Commercial Items applies to this acquisition. Complete and return with quote if required 52.212-3 -- Offeror Representations and Certifications -- Commercial Items (Nov 2021)

11. Clause 52.212-4 Contract Terms and Conditions – Commercial items, applies to this acquisition.

Quotes submitted in response to this solicitation shall not contain nor be subject to the vendor’s standard commercial terms and conditions. Any quote submitted in response to this solicitation, which includes the vendor's standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation.

12. Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items (Jan 2022), applies to this acquisition along with the following FAR Clauses cited in the clause are applicable.

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.] _X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (SEP 2021) (15 U.S.C. 657a).

__ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (SEP 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (13) [Reserved] __ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-6.

__ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

__ (17) (i) 52.219-9, Small Business Subcontracting Plan (NOV 2021) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (NOV 2016) of 52.219-9.

__ (iii) Alternate II (NOV 2016) of 52.219-9.

__ (iv) Alternate III (JUN 2020) of 52.219-9.

__ (v) Alternate IV (SEP 2021) of 52.219-9.

__ (18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (MAR 2020) of 52.219-13.

__ (19) 52.219-14, Limitations on Subcontracting (SEP 2021) (15 U.S.C. 637s).

__ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (SEP 2021) (15 U.S.C. 657f).

_X_ (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (SEP 2021) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (MAR 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (SEP 2021) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (SEP 2021) (15 U.S.C. 637(m)).

__ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

__ (26) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15U.S.C. 637(a)(17)).

_X_ (27) 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

__ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN 2022) (E.O.13126).

__ (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

_X_ (30) (i) 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

__ (ii) Alternate I (FEB 1999) of 52.222-26.

_X_ (31) (i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

__ (ii) Alternate I (JUL 2014) of 52.222-35.

_X_ (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

__ (ii) Alternate I (JUL 2014) of 52.222-36.

__ (33) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

__ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

_X_ (35) (i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (36) 52.222-54, Employment Eligibility Verification (NOV 2021) . (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

__ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

__ (40) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (OCT 2015) of 52.223-13.

__ (41) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

__ (43) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (JUN 2014) of 52.223-16.

_X_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513).

__ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

__ (46) 52.223-21, Foams (Jun2016) (E.O. 13693).

__ (47) (i) 52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (JAN 2017) of 52.224-3.

__ (48) 52.225-1, Buy American-Supplies (NOV 2021) (41 U.S.C. chapter 83).

__ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2021) (41 U.S.C.chapter83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (JAN 2021) of 52.225-3.

__ (iii) Alternate II (JAN 2021) of 52.225-3.

__ (iv) Alternate III (JAN 2021) of 52.225-3.

__ (50) 52.225-5, Trade Agreements (OCT 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) (42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42 U.S.C. 5150).

__ (55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

__ (56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

__ (57) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

_X_ (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (OCT2018) (31 U.S.C. 3332).

__ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

__ (61) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

_X_ (62) 52.242-5, Payments to Small Business Subcontractors (JAN 2017) (15 U.S.C. 637(d)(13)).

__ (63) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

__ (ii) Alternate I (APR 2003) of 52.247-64.

__ (iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.] _X_ (1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter67).

_X_ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

__ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

__ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014) (41 U.S.C. chapter 67).

_X_ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022).

_X_ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

__ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(vii) 52.222-26, Equal Opportunity (SEP 2015) (E.O.11246).

(viii) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May2014) (41 U.S.C. chapter 67).

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (NOV 2021) (E.O. 12989).

(xvii) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

13. The following additional information is applicable to this acquisition:

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

COMBO INVOICE

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

MSCHQ_WAWF@NAVY.MIL

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

MSC SPECIFIC WIDE AREA WORKFLOW (WAWF) INSTRUCTIONS

The information contained in this instruction is supplemental to DFARS 252.232-7006.

The information contained in the table in DFARS 252.232-7006 is for WAWF purposes only. Information included in DFARS 252.232-7006 and this WAWF instruction apply only to WAWF Invoicing and WAWF Receiving Reports. Contradictory information elsewhere in this contract, e.g. Ship to DoDAAC, shall be followed per the terms and conditions of the contract.

When entering the invoice into WAWF, the Contractor shall fill in the DoDAAC fields or DoDAAC extensions exactly as shown in the table in DFARS 252.232-7006. Fields that should not be filled in when entering the invoice into WAWF will be indicated with the direction, “Leave Blank.”

In some situations, the WAWF system will pre-populate the “Pay DoDAAC,” “Admin By DoDAAC” and “Issue By DoDAAC.” The Contractor shall verify that those DoDAACs automatically entered by the WAWF system match the information in the table in DFARS 252.232-7006. If these DoDAACs do not match, then the Contractor shall correct the field(s).

If Receiving Reports are required, ensure that the “Inspection” and “Acceptance” defaults of “destination” for both fields are not changed in the WAWF online interface.

The CLINs on the WAWF invoice shall be entered exactly as set forth in the contract document including CLIN number (e.g. 0001), Quantity (may be adjusted for actual quantity or dollar value delivered and invoiced), and Unit Price (e.g. $1.00). The dollar amounts on each CLIN or SubCLIN on the WAWF invoice shall reflect final performance values, but in no instance can the dollar amount for each CLIN or SubCLIN exceed what is specified in the contract document. The Contractor shall bill to the lowest level, e.g., the SubCLIN level. The Quantity and Unit of Measure fields must be filled out exactly as indicated in the CLINs and SubCLINs to reduce the possibility of the invoice being delayed or rejected during processing.

Before closing out of an invoice session in WAWF, but after submitting the document or documents, the Contractor will be given the option to send additional email notifications by clicking on the “Send More Email Notifications” link that appears on the page. The Contractor shall click on this link and add the Technical Point of Contact’s (TPOC) or Contracting Officer’s Representative’s (COR) email address in the first email address block and add any other additional email addresses desired in the following blocks. This additional notification to the Government is important to ensure the acceptor/receiver is aware that the invoice documents have been submitted into the WAWF system.

(End of instructions)

CAUTION - BRAND NAME ONLY

By accepting this purchase order, the Vendor expressly understands and acknowledges that this purchase order is only for the brand name items and parts identified in this purchase order and that the brand name items and parts constitute a material term of this purchase order. The Vendor shall not tender for delivery any substitute and/or alleged equal item or part. The Vendor is hereby warned that any substitute and/or alleged equal item or part tendered for delivery will be rejected by the Government as a non-conforming item and will provide a basis to cancel the purchase order or terminate the purchase order for cause. The Vendor shall be responsible for all costs, such as but not limited to shipping, delivery, repackaging, etc., and arrangements for the return of any non-conforming item.

(End of instructions)

WOOD PACKAGING MATERIAL (WPM) - ADDITIONAL DELIVERY INSTRUCTIONS

In accordance with the requirements of International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved "DUNNAGE" stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry.

(End of instructions)

DUTY-FREE ENTRY

In accordance with DFARS 252.225-7013, this material requires duty free entry into the US. Contractor is to initiate the entitlement request via Defense Contract Management Agency's (DCMA) Duty Free Entitlement (DFE) 1.5 website: https://www.dcma.mil/aboutetools/. If you require assistance, please contact the DCMA helpdesk at 1-888-576-DCMA (3262). This purchase order will not be modified to reimburse the contractor for any customs fees incurred for failure to request duty free entry via this program.

(End of instructions)

WAGE DETERMINATION

The following wage determination, in accordance with the Service Contract Act of 1965, as amended, is hereby incorporated by reference into the contract and compliance with the same is mandatory: WD 15-4233 (Rev. – 23) dtd 04/27/2022.

(End of instructions)

SHIP & BASE ACCESS

Vendors are responsible for correctly submitting forms/applications. Vendors are encouraged to monitor email using the “Request a Read Receipt” function and to confirm receipt of facsimile transmissions.

Due to enhanced security measures, ship and base access is required for pre-award ship visits (e.g. ship-check) and contract performance. Specifically, the following permissions are required:

1. Navy Installation Access

2. Ship Access List (vendor-provided)

Navy Installation Access: Offerors must complete a Department of the Navy Local Population ID Card/Base Access Pass Registration form (SECNAV 5512/1). This form is required to conduct the background vetting and complete the access credentialing process. Contact David Barton at david.l.barton22.civ@us.navy.mil for a DoD SAFE link to submit the form encrypted.

Ship Access List (Vendor-Provided): On company letterhead, the vendor is required to provide an accurate, current list of visiting personnel prior to being admitted aboard the vessel. This list shall include name, title, and company name. No PII shall be submitted. A hand-delivered list will not be accepted. E-mail the letter at least four (4) days prior to the scheduled site visit to David Barton at david.l.barton22.civ@us.navy.mil.

(End of instructions)

14. This solicitation does not have a Defense Priorities and Allocation System (DPAS) rating.

15. Quotes shall be e-mailed directly to Tiffany Allen at tiffany.l.allen21.civ@us.navy.mil, the sole designated E-mail address and inbox for receipt of E-mail submissions. E-mail quotes shall be in either Adobe or Microsoft Office format. To be timely, a quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission. No other method of submission is acceptable.

16. For additional information regarding this solicitation contact Tiffany Allen at tiffany.l.allen21.civ@us.navy.mil.

See attached SOW.

USNS COMFORT

(TAH 20)

1.0 ABSTRACT

1.1 This item describes the requirement to overhaul of the Force Protection Davit Onboard. Period of Performance Time of Award – 31 August 2022

2.0 REFERENCES:

2.1 Palfinger Crane Operators Manual

2.2 MSFSC Standard Item 19 Motor and Ventilation Fan Repairs

2.3 ABS Guide for Certification of Lifting Appliances, Jan 2018

2.4 Surface Preparation Standard, SSPC-SP-10/NACE No. 2, Near-White Blast Cleaning

3.0 ITEM LOCATION/DESCRIPTION

3.1 Location/Quantity

3.1.1 01 Level, Frame 87 Starboard Weather Deck

3.2 Item Description/Manufacturer's Data:

3.2.1 FORCE PROTECTION BOAT CRANE

PALFINGER 32002M

MODEL NO: PK32002MA

SERIAL#: 1440392

4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES/INFO:

4.1 All lubricants with the exception of the cable grease will be provided by the ship.

4.2 The following PPG Coating Materials:

5.0 NOTES:

5.1 The contractor and all subcontractors, regardless of tier, must consult the General Technical Requirements to determine applicability to this work item. In performance of this work item, the contractor and all subcontractors regardless of tier must comply with the requirements of all applicable GTRs, including but not limited to GTRs 1-7, 21,22,25,26 and 29.

5.2 Force Protection Boat Davit is currently being removed during the Comforts current ROH being accomplished at Alabama Shipyard. Once the Contract has been awarded, the government will ship the Davit to the Contractor’s Facility for repair. Once repairs are complete the Government will arrange for shipment of the Force Protection Boat Davit from the Contractor’s Facility to the USNS Comfort (T-AH 20) for installation.

5.3 Installation, testing and certification of the Force Protection Boat Davit will be handled under a separate procurement.

6.0 QUALITY ASSURANCE REQUIREMENTS:

6.1 The requirements of this Work Item shall be accomplished to the satisfaction of the MSCREP.

6.2 The requirements of this Work Item shall be accomplished in accordance with current Regulatory Body rules and regulations.

7.0 STATEMENT OF WORK REQUIRED

7.1 Mechanical/Fluid:

7.1.1 Completely disassemble, clean and inspect all components for the Force Protection Boat Davit listed in 3.2 using Reference 2.1 for guidance.

7.1.2 Conduct a thorough inspection of all components for defects and wear using Reference 2.1 for guidance.

7.1.3 Measure and record all clearances using Reference 2.1 for guidance.

7.1.4 Accomplish NDT Inspections for all pins and bushings in the presence of the MSCREP using Reference 2.1 for guidance. Record all findings to be submitted with the results of the inspection in 7.1.2.

7.1.5 Rebuild each Hydraulic Cylinder as follows:

7.1.5.1 Transport each hydraulic cylinder to a qualified Hydraulic Shop for repair.

7.1.5.2 Drain and dispose of the oil from each hydraulic cylinder in accordance with local, state and federal rules and regulations.

7.1.5.3 Disassemble clean and inspect each hydraulic cylinder using Reference 2.1 for guidance. Take all measurements necessary to determine the existing condition of the parts for each Hydraulic Cylinder.

7.1.5.4 Submit a typed written report to the MSCREP listing the results of the inspection in 7.1.5.3. The report shall include any repairs required to restore each Hydraulic Cylinder to design specification and a list of all required repair parts.

7.1.5.5 Present the parts for each Hydraulic Cylinder to the MSCREP, ABS Surveyor and USCG Inspector for inspection.

7.1.5.6 Provide and install a new ram for each Hydraulic Cylinder using Reference 2.1 for guidance.

7.1.5.7 When directed by the MSCREP, assemble each Hydraulic Cylinder using new seal kit, new gaskets, new hardware and Reference 2.1 for guidance.

7.1.5.8 Accomplish a pressure test of each hydraulic cylinder using new hydraulic oil in the presence of the MSCREP, ABS Surveyor and USCG Inspector for 10 minutes. Allowable leakage: none.

Note: MSCREP will provide new hydraulic oil to fill each cylinder for pressure test.

7.1.6 Rebuild each Hydraulic Pump as follows:

7.1.6.1 Transport each Hydraulic Pump to a qualified Hydraulic Shop for repair.

7.1.6.2 Drain and dispose of the oil from each Hydraulic Pump in accordance with local, state and federal rules and regulations.

7.1.6.3 Disassemble clean and inspect each Hydraulic Pump using Reference 2.1 for guidance. Take all measurements necessary to determine the existing condition of the parts for each Hydraulic Pump.

7.1.6.4 Submit a typed written report to the MSCREP listing the results of the inspection in 7.1.6.3. The report shall include any repairs required to restore each Hydraulic Pump to design specification and a list of all required repair parts.

7.1.6.5 Present the parts for each Hydraulic Pump to the MSCREP, ABS Surveyor and USCG Inspector for inspection.

7.1.6.6 When directed by the MSCREP, assemble each Hydraulic Pump using new normal wear parts, new gaskets, new hardware and Reference 2.1 for guidance.

7.1.6.7 Accomplish a pressure test of each Hydraulic Pump using new hydraulic oil in the presence of the MSCREP, ABS Surveyor and USCG Inspector for 10 minutes. Allowable leakage: none.

Note: MSCREP will provide new hydraulic oil to fill each Hydraulic Pump for pressure test.

7.1.7 Rebuild each Hydraulic Slewing Motor and Brake Assembly as follows:

7.1.7.1 Transport each Hydraulic Slewing Motor to a qualified Hydraulic Shop for repair.

7.1.7.2 Drain and dispose of the oil from each Hydraulic Slewing Motor in accordance with local, state and federal rules and regulations.

7.1.7.3 Disassemble clean and inspect each Hydraulic Slewing Motor and Brake Assembly using Reference 2.1 for guidance. Take all measurements necessary to determine the existing condition of the parts for each Hydraulic Slewing Motor and Brake Assembly.

7.1.7.4 Submit a typed written report to the MSCREP listing the results of the inspection in 7.1.7.4. The report shall include any repairs required to restore each Hydraulic Slewing Motor and Brake Assembly to design specification and a list of all required repair parts.

7.1.7.5 Present the parts for each Hydraulic Slewing Motor and Brake Assembly to the MSCREP, ABS Surveyor and USCG Inspector for inspection.

7.1.7.6 When directed by the MSCREP, assemble each Hydraulic Slewing Motor and Brake Assembly using new normal wear parts, Brake pads, new gaskets, new hardware and Reference 2.1 for guidance.

7.1.7.7 Accomplish a pressure test of each Hydraulic Slewing Motor using new hydraulic oil in the presence of the MSCREP, ABS Surveyor and USCG Inspector for 10 minutes. Allowable leakage: none.

7.1.8 Clean and inspect the Slewing Bearing for continued use.

7.1.8.1 Take measurements to determine the existing condition of the slew bearing.

7.1.8.2 Submit a typed written report to the MSCREP listing the results of the inspection in 7.1.8. The report shall include any repairs required to restore the slewing bearing assembly to design specification and a list of all required repair parts.

7.1.9 Rebuild each Hydraulic Winch and Brake Assembly as follows:

7.1.9.1 Transport each Hydraulic Winch to a qualified Hydraulic Shop for repair.

7.1.9.2 Drain and dispose of the oil from each Hydraulic Winch in accordance with local, state and federal rules and regulations.

7.1.9.3 Disassemble clean and inspect each Hydraulic Winch and Brake Assembly using Reference 2.1 for guidance. Take all measurements necessary to determine the existing condition of the parts for each Hydraulic Winch and Brake Assembly.

7.1.9.4 Submit a typed written report to the MSCREP listing the results of the inspection in 7.1.7.4. The report shall include any repairs required to restore each Hydraulic Winch and Brake Assembly to design specification and a list of all required repair parts.

7.1.9.5 Present the parts for each Hydraulic Winch and Brake Assembly to the MSCREP, ABS Surveyor and USCG Inspector for inspection.

7.1.9.6 When directed by the MSCREP, assemble each Hydraulic Winch and Brake Assembly using new normal wear parts, Brake pads, new gaskets, new hardware and Reference 2.1 for guidance.

7.1.9.7 Accomplish a pressure test of each Hydraulic Winch using new hydraulic oil in the presence of the MSCREP, ABS Surveyor and USCG Inspector for 10 minutes. Allowable leakage: none.

7.1.9.8 Provide and install a new wire rope assembly for the Force Protection Boat Davit in accordance with Reference 2.1.

7.1.9.9 Submit a copy of the Wire Rope Certificates to the MSCREP, ABS Surveyor and USCG Inspectors.

7.1.10 Rebuild each Sheave Assembly as follows:

7.1.10.1 Disassemble clean and inspect each Sheave Assembly using Reference 2.1 for guidance. Take all measurements necessary to determine the existing condition of the parts for each for further use.

7.1.10.2 Submit a typed written report to the MSCREP listing the results of the inspection in 7.2.3.4.3. The report shall include any repairs required to restore each Sheave Assembly to design specification and a list of all required repair parts.

7.1.10.3 Present the parts for each Sheave Assembly to the MSCREP, ABS Surveyor and USCG Inspector for inspection.

7.1.10.4 When directed by the MSCREP, assemble each Sheave Assembly using new bearings, shims, spacers, seals, new gaskets, new hardware and Reference 2.1 for guidance.

7.1.10.5 Accomplish a operational test of the Sheave Assembly to assure free and unbinding movement in the presence of the MSCREP, ABS Surveyor and USCG Inspector.

7.1.11 Fabricate new Flexible Hose Assemblies using Reference 2.1 and existing hose assemblies for guidance.

7.1.11.1 Accomplish a hydrostatic test of each hose assembly in the presence of the MSCREP using Reference 2.1 for guidance.

7.1.11.2 Install CRES Tags on each hose assembly listing the Test Pressure, Test Date and Testing Activity.

7.1.12 Present all parts to the MSCREP, ABS Surveyor and USCG Inspector for inspection.

7.1.13 Submit a typewritten report listing the results of the inspections accomplished in 7.2.3.1 thru 7.2.3.3 to the MSCREP and ABS Surveyor. The report shall include all required repairs to return the Force Protection Boat Davit to full operational condition.

7.1.14 When directed by the MSCREP, reassemble the Force Protection Boat Davit listed in 3.2 using new bearings, seals,…