B08_Solicitation_Attach_1__Specs.docx

Knife River National Park Skid Steer Specs The vendor shall supply and deliver a Bobcat S86 T4 or equivalent that shall be compatible with the following attachments Shall be a 7-Pin Electric Attachment Control. A 14-Pin Electric Control will only be accepted if adapter cables for the 7-Pin are included.

Bobcat Hydraulic Attachments:

· Bobcat 80” 7-way Dozer Blade, Model 80 Dozer, with 7-Pin electric attachment control over hydraulic

· Bobcat SB 200 Snowblower, Model 200 x 66, with 7-Pin electric attachment control over hydraulic

· Bobcat Angle Broom 68, Model 7337703, 7-Pin electric attachment control over hydraulic Specification Characteristics:

Shall have a fully hydrostatic four-wheel drive.

Transmission shall be infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic drive motors.

Hydrostatic piston pumps shall be driven direct from the engine.

The Engine shall have a 4-cylinder, liquid-cooled diesel;105.0 hp turbo charged Diesel Operator Cab Instrumentation:

Keyless Start with Display Panel Heated Cloth Air Ride Suspension Seat The optional selectable joystick control system shall be mounted to the seat and shall be able to adjust independently of the seat.

Enclosed Cab with HVAC Top & Rear Windows with a Clearview visibly/window cut

· Sound Reduction Enclosed Cab Operator Noise Level not more than 78 dB

· Rear Window External Removal Kit Selectable Joystick Controls (S.JC)

· Optional Selectable Joystick Control (SJC) system shall be available to allow operator to switch between ISO control pattern (loader direction, steering and travel speed on left hand joystick; loader lift and tilt functions on right hand joystick) or H-Pattern (left hand joystick controls lift function and left side drive function; right hand joystick controls tilt function and right-side drive function).

Roll Overprotective Structure (ROPS) meets SAE-J1040 & ISO 3471 Falling Object Protective Structure (FOPS) meets SAE-J1043 & ISO 3449, Level I; (and Level II) Parking Brake: Wedge Brake System Rear View Camera Engine/Hydraulic Performance De-Rate Protection Glow Plugs (Automatically Activated) Max Control Kit or similar which utilizes an app on a phone to remotely operate the machine.

Dual Direction Bucket Positioning Automatic Ride Control Hydraulic Cooling (with Reversing) Fan

· Reversing fan shall include three modes:

· Off

· Manual Operation: Operator can momentarily reverse fan direction as desired

· Automatic Operation: Loader will reverse the fan automatically based on fluid temperatures Three Auxiliary Hydraulics Functions:

42 gpm/4061 psi SuperFlow

36.6 gpm/3500 psi High Flow 23 gpm/3500 psi Standard Flow Engine Block Heater Battery shall be a 12 volt with a minimum of 1000 cold-cranking amps.

80" Heavy Duty Bucket with Bolt-On Cutting Edge Tipping Load ................................................................................................... 6000-8000 lbs.

Travel Speed 2 speed Hydo Hydraulic Quick Latching for attachments from the cab Auxiliary hydraulic hoses shall be routed inside the lift arm.

Auxiliary quick coupler block shall be integrated into the lift arm front and must be protected with steel guarding.

Shall have 3-coupler block as standard equipment and include

- ½" quick couplers Shall have 5-coupler block as an option and include

Shall have rear auxiliary hydraulics as an option and include

- Electric finger controls on left joystick.

Dual-Direction bucket positioning shall be available as an option.

- Shall include on/off button inside operator cab. Automatic Ride control shall be available as an option.

Delivery:

The Government would like to have the Skid Steer within 30-45 days ARO if possible.

FBO DELIVERY TO:

Jesse Schiferl 564 County Road 37 Stanton, ND 58571