B08 Attachment 0001 - Purchase Description No 1557 6 SEP 2022.pdf
PDF 91 KB Posted
- Attached to
- 120MM Crimping Mold Federal contract opportunity
- Solicitation number
- W52P1J-22-Q-3071
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation W52P1J-22-Q-3071 Amendment 0002 dated 26 SEP 2022.pdf | ||
| Solicitation W52P1J-22-Q-3071 Amendment 0001 dated 21 SEP 2022.pdf | ||
| W52P1J-22-Q-3071.pdf | ||
| B08 Exhibit A - Contract Data Requirements List 001 Certificate of Conformance.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 0001 - Purchase Description No. 1557 Crimping Mold 120mm Canister
6 September 2022
1. Equipment Description:
Design, fabricate, and assemble a mold for crimping 120mm canisters that are filled with pyrotechnic mix. The mold is shown in the provided drawings (31630-ME-3010), 120mm Filling & Pressing Mold (Sheets 1-24)) provided with the exceptions listed below.
2. Applicable Drawings (Electronic File Names):
Drawing 31630-ME-3010, 120mm Crimping Mold (Sheets 1-24)
3. Requirements:
The mold shall be identical in design to that shown in the drawings the provided drawing (31630-ME-3010).
a. All parts shall be checked against the drawing (31630-ME-3010), and a certificate of conformance shall be issued, as per Contract Data Requirement List (CDRL) A001.
b. The mold shall be designed to fit the canister after it is filled and pressed and prior to crimping.
c. After crimping, the crimped canister will be kick out of the mold by the ejection pin without damaging the canister body.
d. Canisters must maintain their dimensions during the crimping process.
e. After fabrication of the mold has been completed, the entire exterior of the mold shall be primed and painted. All surfaces that are not painted will be coated with a rust prohibitor.
4. Identification:
The mold will be identified as to what it is for, i.e. 120mm Crimp. Identification can be made by securely fastening a name plate to the exterior of the mold or etching or stamping the mold. Etching or stamping shall be legible even after painting.
5. Drawings
Upon award of the contract the SolidWorks drawings will be provided to the vendor.
File details come from the government source that posted it. Updated .