B - Specifications.pdf
PDF 75 KB Posted
- Attached to
- Small Business Set Aside for Electrical Pull Winch to meet the attached Specifications Federal contract opportunity
- Solicitation number
- N61331-21-T-JK36
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Winch Procurement Questions Answers.docx | DOCX document | |
| M - Clauses.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PULL TEST WINCH REQUIREMENTS
1. Winch drive technology – All Electric
2. Voltage requirement – 208‐230/460 VAC, 3 phase, 60 Hz
3. Working Load line pull – 8000 pounds safe working load (bare drum)
4. Winch Speed – variable from 0 – 20 feet/min (bare drum)
5. Storage drum diameter ‐ 24 inch
6. Drum capacity – 1500 feet of ½ inch diameter cable
7. Level wind requirements ‐ None
8. Winch control – One control panel with 25 feet of cable to operate remotely from winch. One pay‐in and pay‐ out joy stick with emergency stop button. Power on indicator light. Laser engraved lettering
9. Tension readout – cable tension readout only. No speed or length data required.
10. Electronic enclosures shall be at a minimum IP66 rating
11. Provisions for a USB port required to record tension data file on portable hard drive
12. Provisions for standard width fork lift pockets on frame bottom
13. Maximum use of corrosion resistant fasteners and materials required
14. 4 point Lifting eyes/rings required at strategic locations, on frame top, for a level lift of the winch. Lifting eyes/rings rated with a 3 to 1 safety factor. Assume 500 pounds of cable loaded on drum when calculating lifting eyes/rings safety factor.
15. Tie downs required on all sides of the base frame bottom
16. Dark gray marine grade paint on all surfaces requiring paint
File details come from the government source that posted it. Updated .